Top Fencing Companies in Eastern Goleta Valley, CA, 93110 | Compare & Call

There are 143 fencing companies server in Eastern Goleta Valley CA

Outlaw Iron

Outlaw Iron

Oxnard CA 93036
Fences & Gates, Metal Fabricators, Decks & Railing

Outlaw Iron, based in Oxnard, CA, is a veteran-owned home improvement company specializing in fences, gates, metal fabrication, and deck services. Our team handles everything from new deck constructio...

SV Metal Fabrication

SV Metal Fabrication

Oxnard CA 93036
Metal Fabricators, Fences & Gates

SV Metal Fabrication, located in Oxnard, CA, is a trusted provider of metal fabrication and custom fencing and gates. Serving neighborhoods from RiverPark to the historic downtown area, the team under...

Julian's landscaping

Julian's landscaping

★★★★★ 4.6 / 5 (17)
Oxnard CA 93030
Landscaping, Irrigation, Fences & Gates

Julian's Landscaping in Oxnard, CA, started from a passion for the outdoors and a hands-on approach to the natural world. Julian began as a foreman, studying plants and becoming an expert in irrigatio...

FENCE 4 U

FENCE 4 U

★★★★☆ 4.4 / 5 (7)
224 S 11th St, Santa Paula CA 93060
Fences & Gates

FENCE 4 U is a Santa Paula-based fence and gate company founded by a former installer for one of California’s largest fencing companies. After five years with that firm, he started his own business to...

Holley Built

Holley Built

Ventura CA 93003
Fences & Gates, Patio Coverings, Carpenters

Holley Built is a Ventura-based builder specializing in custom wood gates, fences, patio covers, and outdoor structures designed to improve security, privacy, and curb appeal. The company focuses on d...

Jiménez Iron Work

Jiménez Iron Work

4830 Terrace Ave, Oxnard CA 93033
Metal Fabricators, Fences & Gates, Decks & Railing

Jiménez Iron Work provides metal fabrication, fence and gate installation, and deck construction for homes and businesses in Oxnard, CA. With over 10 years of hands-on experience, owner Jiménez specia...

805 Fence Company

805 Fence Company

★★★☆☆ 3.0 / 5 (2)
Oxnard CA 93036
Fences & Gates

805 Fence Company serves homeowners and businesses in Oxnard and across Santa Barbara, Ventura, and Los Angeles counties with reliable fencing and gate solutions. Based near the Channel Islands Harbor...

Fence Factory Rentals - Ventura County

Fence Factory Rentals - Ventura County

★★★★★ 4.9 / 5 (7)
821 Maulhardt Ave, Oxnard CA 93030
Fences & Gates, Portable Toilet Services

Fence Factory Rentals - Ventura County has served Oxnard and the surrounding areas since 1994. Founded by Robert Bennett, who started in the fence industry over 40 years ago in Torrance, the company h...

Professional Fence and Steel

Professional Fence and Steel

★★☆☆☆ 1.5 / 5 (2)
Ventura CA 93004
Fences & Gates, Metal Fabricators, Decks & Railing

Professional Fence and Steel is a family-owned fence and steel fabrication company based in Ventura, California. With years of experience serving homeowners across Ventura County, we specialize in wro...

Allen Overhead Door

Allen Overhead Door

★★★★★ 5.0 / 5 (2)
Santa Paula CA 93060
Garage Door Services, Fences & Gates

Allen Overhead Door has been a trusted provider of garage door and gate services in Santa Paula and the surrounding Ventura and Santa Barbara counties. Founded on the principles of reliability and res...



Estimated Fencing Costs in Eastern Goleta Valley, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Eastern Goleta Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

How soon can a consultant visit my property for an estimate?

We typically schedule consultations within 48 hours. For a site in Old Town Goleta, our routing from the Goleta Valley Community Center via US-101 and local streets accounts for an estimated 25-35 minute travel window. We confirm the exact time based on real-time traffic data. The consultation includes a zoning review, wind exposure assessment, and a detailed scope of work accounting for the current $55/hr average labor rate.

Why do fence posts in Old Town Goleta require deep concrete footings?

The Eastern Goleta Valley has a 12-inch frost line. When soil freezes, it expands and exerts upward pressure, a process called frost heave. Posts not set below this depth can lift out of alignment, causing structural failure. IRC Section R403.1.4 mandates footings extend below the frost line to prevent this. For a 6-foot fence in a 105 MPH V-ult wind zone, this stable foundation is non-negotiable for resisting lateral loads.

What are the height and setback rules for a fence on my property?

General residential zoning in Eastern Goleta Valley limits fences to 3 feet in front yards and 6 feet in rear and side yards. The setback is 0 feet, meaning you can build on the property line. However, corner lots have critical 'sight triangle' regulations. Fences within 10 feet of the intersection of two property lines must be under 3 feet tall to maintain driver visibility, a key safety concern for homes near US-101 feeder roads.

Can a smart gate system meet California pool safety codes?

Yes, when integrated correctly. California Health & Safety Code 115922 requires pool barriers to be at least 5 feet high with self-closing, self-latching gates. A smart gate with an integrated IoT latch can meet ASTM F1908 standards by providing automatic closure, remote status alerts, and an audit trail. This combines the modern trend of access control with proven liability protection, ensuring the gate cannot be left accidentally open.

How does the local wind speed affect fence design?

The 105 MPH V-ult wind speed rating is an ultimate design wind speed per ASCE 7-22 standards. This engineering data dictates the structural design. For a solid privacy fence, standard 8-foot post spacing is often insufficient; 6-foot spacing with deeper footings is typical. The design must use hurricane-rated brackets and consider wind exposure category based on proximity to open terrain or US-101, ensuring the structure can survive peak storm season gusts.

What fencing materials hold up best against local termites and soil?

With a Moderate to Heavy termite risk and Moderate soil corrosivity, material compatibility is critical. Pressure-treated lumber rated for ground contact or composite materials are primary choices. All metal fasteners and hardware must be hot-dip galvanized. Standard zinc-coated screws will corrode, leaving rust streaks on the wood. For metal posts, a hot-dip galvanized coating is the minimum requirement to prevent premature failure from soil oxidation.

What is the first step before digging fence post holes?

You must call 811, the Underground Service Alert of Southern California, at least two working days before digging. They mark all public utility lines for free. Hitting a gas, water, or fiber optic line in Old Town Goleta is a major liability that can result in service outages, fines, and repair costs. After the locate, you must pull a permit from the Goleta Building & Safety Division. We manage this paperwork to ensure the project meets all zoning and engineering stamps.

Am I legally required to notify my neighbor before replacing our shared fence?

Yes. California Civil Code 841, the 'Good Neighbor Fence Law,' requires written notice 30 days prior to construction or replacement of a boundary fence. As of 2026, this notice must include a description of the project, estimated cost, and a proposed method of cost sharing. Failure to provide proper notice in Eastern Goleta Valley can result in losing the right to seek reimbursement and may lead to a partition fence dispute.



Scroll to Top
CALL US NOW