Top Fencing Companies in Felton, CA, 95018 | Compare & Call

There are 174 fencing companies server in Felton CA

1Up Garage Door

1Up Garage Door

★★★★☆ 4.2 / 5 (5)
919 S Winchester Blvd, San Jose CA 95128
Fences & Gates, Garage Door Services

1Up Garage Door in San Jose, CA, provides expert garage door services and fencing solutions tailored to the local climate. Located near the busy intersections of Stevens Creek Boulevard and Santana Ro...

J & A Garcia Fencing

J & A Garcia Fencing

★★★★★ 5.0 / 5 (4)
San Jose CA 93635
Fences & Gates

J & A Garcia Fencing serves San Jose, CA, helping homeowners tackle common local fencing problems like aging materials and sagging gates. Located just minutes from downtown San Jose and neighborhoods ...

New Generation Fencing

New Generation Fencing

★★★☆☆ 3.0 / 5 (2)
130 Azucar Ave, San Jose CA 95111
Fences & Gates

New Generation Fencing serves San Jose, CA, providing expert fence and gate services. Common local issues include leaning fences from soil erosion or weather, and broken gate hardware from frequent us...

Dario's Painting & Handyman

Dario's Painting & Handyman

★★★★☆ 3.9 / 5 (25)
San Jose CA 95130
Handyman, Painters, Fences & Gates

Dario's Painting & Handyman has been serving San Jose homeowners since 1998, offering a full spectrum of home improvement services from interior and exterior painting to drywall repair, tile installat...

Nob Hill Gates & Garage Doors

Nob Hill Gates & Garage Doors

★★★★★ 5.0 / 5 (2)
San Francisco CA 94108
Fences & Gates, Garage Door Services

Nob Hill Gates & Garage Doors, founded in 2016, is San Francisco's trusted neighborhood garage door and gate service. Oliver Rees, a local homeowner himself, understands the urgency of a broken garage...

Resolute Iron Works

Resolute Iron Works

★★★★★ 4.9 / 5 (65)
Hayward CA 94544
Fences & Gates, Metal Fabricators

Resolute Iron Works, based in Hayward, CA, is a licensed and bonded metal fabrication company founded in 2019. The business is led by Leo, a welder and fabricator with over 35 years of experience in t...

Jaz Builders

Jaz Builders

★★★★★ 4.9 / 5 (66)
540 Benton St, Santa Clara CA 95050
Fences & Gates, Patio Coverings, Decks & Railing

Jaz Builders is a locally owned construction company in Santa Clara, born from a commitment to honesty and respect. After a disappointing first job in the industry, our founder left construction entir...

Joy's Fence Masters

Joy's Fence Masters

★★★★★ 5.0 / 5 (7)
Concord CA 94521
Fences & Gates, Decks & Railing, Patio Coverings

Joy's Fence Masters, based in Concord, CA, specializes in building fences, decks, and patio coverings with a focus on quality and durability. Founded by a woodworking enthusiast with nearly eight year...

Brothers Welding

Brothers Welding

★★★★★ 4.7 / 5 (122)
Oakland CA 94606
Metal Fabricators, Fences & Gates

Brothers Welding, owned by Jose Zelaya, brings over 14 years of certified mobile welding expertise to Oakland, CA. After 17 years in the Union, Jose founded this business to turn his passion for metal...

Kings Refinish

Kings Refinish

★★★★★ 5.0 / 5 (93)
Redwood City CA 94062
Decks & Railing, Refinishing Services, Fences & Gates

Kings Refinish, based in Redwood City, CA, is a licensed deck restoration company that specializes in refinishing decks, railings, fences, and furniture. We provide a complete professional package for...



Estimated Fencing Costs in Felton, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Felton. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What is the required process before digging fence post holes?

You must contact Underground Service Alert of Northern California (call 811) at least two working days before excavation. They will mark all public utility lines. Hitting an unmarked line in Felton Proper, such as a fiber optic cable, can result in six-figure repair liabilities and county fines. A professional installer manages this ticket and pulls any required county permits, ensuring the work is documented and inspected.

How do wind loads affect my fence design?

Felton's 105 MPH V-ult wind speed rating dictates the structural design. This ultimate design wind speed, per ASCE 7-22 standards, requires reduced post spacing (often 6 feet on-center maximum for a 6-foot fence), deeper concrete footings, and through-bolt or structural screw connections at all critical joints. A fence not engineered for this load will fail during the peak storm season from the San Lorenzo Valley.

What are the height and setback rules for a fence on my property?

Santa Cruz County zoning enforces a 3-foot height limit in the front yard and a 6-foot limit in the rear, measured from the grade. The setback is 0 feet, meaning you can build directly on your property line. For corner lots, especially those near CA-9, you must maintain a clear 'sight triangle'—typically a 10-foot area from the property corner—free of visual obstructions over 3 feet tall for driver safety.

Can I install an automatic gate for my pool area that meets current safety codes?

Yes, but integration is key. The pool enclosure must first comply with ASTM F1908-16, requiring a 60-inch-high non-climbable barrier with self-closing, self-latching gates. A smart gate operator can be integrated, but the primary latch mechanism must be ASTM-compliant and fail-secure. Modern IoT systems provide audit trails, which help demonstrate due diligence for liability protection under California law.

What is the most critical engineering mistake made during a Felton fence installation?

Setting posts above the 12-inch frost line is the leading cause of structural failure. Frost heave in Felton Proper's soil can lift a post 2-3 inches in a single winter, racking the entire frame. The 2021 IRC requires footings to extend below the frost depth. Posts set in shallow concrete will fail within two seasons.

If we approve a project, what is the typical timeline for a consultation and start date?

Following project approval, we schedule a site consultation. Our standard dispatch route originates near Henry Cowell Redwoods State Park, proceeds via CA-9, and typically arrives within the 25-40 minute window for Felton addresses. Pending permit approval and material lead times, physical installation can generally commence within 2-3 weeks of the signed contract.

What are the legal requirements for replacing a shared fence with my neighbor?

California Civil Code 841 governs partition fences. As of 2026, you must provide a formal, written Notice of Intent to your adjoining neighbor before any work begins on a shared boundary line. This notice must include a description of the proposed fence, a cost estimate, and a proposed timeline. Failure to provide this notice can result in legal disputes and cost recovery issues.

What fencing materials are best suited for Felton's environment?

Material compatibility is non-negotiable. The moderate soil corrosivity index requires G90 galvanized steel posts and fasteners; anything less will rust and streak. Given the moderate termite risk, pressure-treated lumber rated for ground contact (UC4A) is the minimum standard. Composite or aluminum materials offer superior longevity but at a higher initial cost.



Scroll to Top
CALL US NOW