Top Fencing Companies in Felton, CA, 95018 | Compare & Call

There are 174 fencing companies server in Felton CA

One Stop Garage Doors and Gates

One Stop Garage Doors and Gates

★★★☆☆ 3.0 / 5 (2)
1850 Warburton Ave Ste 106, Santa Clara CA 95050
Garage Door Services, Fences & Gates

One Stop Garage Doors and Gates provides garage door repair, installation, and opener services to residential and commercial clients in Santa Clara, CA. Our technicians handle broken springs, cables, ...

Ability Garage Doors & Gates

Ability Garage Doors & Gates

★★★★★ 5.0 / 5 (3)
San Jose CA 95113
Garage Door Services, Fences & Gates

Ability Garage Doors & Gates has been servicing the Bay Area since 1999, starting with garage door installations and repairs, then expanding into custom gates and access control in 2010. Based in San ...

RQI

RQI

★★★★★ 4.5 / 5 (6)
3000 McKittrick Ct, Ceres CA 95307
Garage Door Services, Door Sales/Installation, Fences & Gates

RQI in Ceres, CA, is a licensed installation and repair service specializing in residential garage doors and iron gates, along with commercial gates, doors, and hardware. The business emphasizes effic...

Compass Engineering Contractors

Compass Engineering Contractors

★★★★★ 5.0 / 5 (1)
25056 Viking St, Hayward CA 94545
Fences & Gates, Masonry/Concrete

Compass Engineering Contractors in Hayward, CA, specializes in asphalt seal coating, pavement striping, and parking lot upgrades, along with masonry, fencing, and gate installation. Serving the local ...

Ortega’s & Sons Construction

Ortega’s & Sons Construction

★★★★★ 5.0 / 5 (4)
26649 Wauchula Way, Hayward CA 94545
General Contractors, Fences & Gates, Decks & Railing

Ortega's & Sons Construction has been serving Hayward and the surrounding East Bay area for more than 20 years, building a reputation as a family owned, licensed general contractor. We take a straight...

Forever Iron Door

Forever Iron Door

3486 Depot Rd, Hayward CA 94545
Fences & Gates, Door Sales/Installation, Metal Fabricators

Forever Iron Door, based in Hayward, CA, has served the local community for over 20 years, specializing in door installation and custom metal fabrication. We produce high-quality iron doors for homes)...

JR Fencing

JR Fencing

★★★★☆ 3.7 / 5 (28)
Salinas CA 93908
Fences & Gates

JR Fencing has served the Salinas community since 1996, offering licensed and insured fence and gate services for residential, commercial, and industrial properties. We specialize in custom installati...

Bp Ironworks

Bp Ironworks

★★★★★ 5.0 / 5 (3)
2376 Alisal Rd, Salinas CA 93908
Metal Fabricators, Fences & Gates

BP Ironworks in Salinas specializes in designing, fabricating, and installing custom steel gates, fencing, railings, and metal features for residential and commercial properties. Using mild steel, sta...

CCOI Gate & Fence

CCOI Gate & Fence

★★☆☆☆ 2.0 / 5 (26)
2960 San Juan Rd, Aromas CA 95004
Fences & Gates

CCOI Gate & Fence has been serving Central California since 1976, designing, manufacturing, and installing custom ornamental iron fencing and gates for residential and commercial properties near Aroma...

Ollin Home Improvements

Ollin Home Improvements

Salinas CA 93906
Handyman, Fences & Gates, Electricians

Ollin Home Improvements is a small, family-owned business based in Salinas, CA, serving the community with handyman, fencing, gate, and electrical services. Founded on the principle that every project...



Estimated Fencing Costs in Felton, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Felton. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What is the required process before digging fence post holes?

You must contact Underground Service Alert of Northern California (call 811) at least two working days before excavation. They will mark all public utility lines. Hitting an unmarked line in Felton Proper, such as a fiber optic cable, can result in six-figure repair liabilities and county fines. A professional installer manages this ticket and pulls any required county permits, ensuring the work is documented and inspected.

How do wind loads affect my fence design?

Felton's 105 MPH V-ult wind speed rating dictates the structural design. This ultimate design wind speed, per ASCE 7-22 standards, requires reduced post spacing (often 6 feet on-center maximum for a 6-foot fence), deeper concrete footings, and through-bolt or structural screw connections at all critical joints. A fence not engineered for this load will fail during the peak storm season from the San Lorenzo Valley.

What are the height and setback rules for a fence on my property?

Santa Cruz County zoning enforces a 3-foot height limit in the front yard and a 6-foot limit in the rear, measured from the grade. The setback is 0 feet, meaning you can build directly on your property line. For corner lots, especially those near CA-9, you must maintain a clear 'sight triangle'—typically a 10-foot area from the property corner—free of visual obstructions over 3 feet tall for driver safety.

Can I install an automatic gate for my pool area that meets current safety codes?

Yes, but integration is key. The pool enclosure must first comply with ASTM F1908-16, requiring a 60-inch-high non-climbable barrier with self-closing, self-latching gates. A smart gate operator can be integrated, but the primary latch mechanism must be ASTM-compliant and fail-secure. Modern IoT systems provide audit trails, which help demonstrate due diligence for liability protection under California law.

What is the most critical engineering mistake made during a Felton fence installation?

Setting posts above the 12-inch frost line is the leading cause of structural failure. Frost heave in Felton Proper's soil can lift a post 2-3 inches in a single winter, racking the entire frame. The 2021 IRC requires footings to extend below the frost depth. Posts set in shallow concrete will fail within two seasons.

If we approve a project, what is the typical timeline for a consultation and start date?

Following project approval, we schedule a site consultation. Our standard dispatch route originates near Henry Cowell Redwoods State Park, proceeds via CA-9, and typically arrives within the 25-40 minute window for Felton addresses. Pending permit approval and material lead times, physical installation can generally commence within 2-3 weeks of the signed contract.

What are the legal requirements for replacing a shared fence with my neighbor?

California Civil Code 841 governs partition fences. As of 2026, you must provide a formal, written Notice of Intent to your adjoining neighbor before any work begins on a shared boundary line. This notice must include a description of the proposed fence, a cost estimate, and a proposed timeline. Failure to provide this notice can result in legal disputes and cost recovery issues.

What fencing materials are best suited for Felton's environment?

Material compatibility is non-negotiable. The moderate soil corrosivity index requires G90 galvanized steel posts and fasteners; anything less will rust and streak. Given the moderate termite risk, pressure-treated lumber rated for ground contact (UC4A) is the minimum standard. Composite or aluminum materials offer superior longevity but at a higher initial cost.



Scroll to Top
CALL US NOW