Top Fencing Companies in Fontana, CA, 92316 | Compare & Call
There are 229 fencing companies server in Fontana CA
A&P Gate Fence is a family-owned business in Valley Village, CA, with over 10 years of hands-on experience in custom gate and fence installation. We specialize in motorized and manual driveway gates, ...
LA Fence Craft
LA Fence Craft, based in Duarte, CA, is a licensed and bonded fencing company serving residential and commercial clients since 2016. We specialize in custom fencing solutions using vinyl, wood, and al...
Cali Fence, a licensed fencing company established in 2008, brings over 25 years of industry experience to Oak Hills and surrounding areas. Based in Riverside, we serve Orange County, the High Desert,...
Duran Custom Iron Gates is a family-owned metalwork business serving Perris, CA, and the surrounding area. We specialize in the fabrication and installation of custom iron gates, fencing, and related ...
Casa Valenzuela Construction is a family-owned, minority-owned general contractor serving Corona and the surrounding areas in Riverside and Orange County. Since 2019, we have built a reputation throug...
LA Fence Craft, located in Rosemead, CA, specializes in fence and gate installation, repair, and staining, as well as deck and patio cover construction. Serving neighborhoods near Garvey Avenue and Ro...
Legacy Iron Works Fence and Gates serves Riverside, CA, with specialized wrought iron, vinyl, and wood fence installation. The company treats every project with the dedication, care, and precision it ...
Sanchez General Fencing, based in Torrance, CA, provides a full range of fence and gate services, specializing in Trex composite fencing, custom rolling gates, and gates. They also install vinyl, wood...
AVF - Aluminum & Vinyl Fencing
AVF - Aluminum & Vinyl Fencing has served Oceanside, CA, and the wider San Diego County for decades, building a reputation for trust and experience in the fencing industry. We specialize in fence and ...
Gama's Iron Works is a licensed, family-owned business serving Chino Hills and surrounding areas since its establishment. We specialize in custom iron work, including side gates, driveway gates, and f...
Estimated Fencing Costs in Fontana, CA
Questions and Answers
How deep should my fence posts be set in Fontana?
All structural posts in Southridge require a footing depth of at least 36 inches to be stable. The IRC mandates a minimum of 12 inches below the local 12-inch frost line to prevent frost heave. Posts set shallower than this will uplift and fail during winter temperature cycles.
How soon can a crew start my fence project in Southridge?
After a site consultation, we typically schedule excavation within 10-14 days. Our route from the Auto Club Speedway via I-10 allows for a consistent 25-35 minute response time to Southridge for initial assessments. We confirm the schedule after utility marks are clear and the City permit is issued.
What are the height and placement rules for a residential fence in Fontana?
Zoning limits are 3 feet in the front yard and 6 feet in the rear, measured from the ground. A 0-foot setback allows building directly on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections. This is critical for safety near high-traffic corridors like I-10, where visibility for drivers is non-negotiable.
What fence materials work best with Fontana's soil and pest conditions?
Material compatibility is essential. The moderate soil corrosivity index requires G90 galvanized steel posts and fasteners to prevent rust streaks. Given the moderate to heavy termite risk, avoid untreated wood in direct ground contact. Use pressure-treated lumber rated for ground contact or superior non-organic materials like vinyl or composite.
Is my fence designed to handle high winds?
It must be. Fontana's 95 MPH V-ult wind speed rating dictates the structural design. This engineering standard determines post spacing, concrete footing size, and bracket strength. Fences near the Auto Club Speedway experience higher exposure, requiring robust designs to survive peak storm season gusts without panel failure or uplift.
What is the first step before digging fence post holes?
You must call 811, the Underground Service Alert of Southern California, at least two working days before digging. Hitting a gas, water, or fiber line in Southridge is a major liability that incurs repair costs and fines. A professional crew manages this call and pulls the required permit from the Fontana permit office to ensure the project is documented and legal.
Can I have a smart gate for my pool area?
Yes, but integration is key. Any gate providing pool access must be ASTM F2286 / ICC-ES compliant with self-closing and self-latching hardware. High-trend smart gate systems now integrate IoT-controlled latches that log access, meeting modern liability standards for California homeowners by providing both convenience and a verifiable safety audit trail.
Am I legally required to talk to my neighbor before building a fence on our shared property line?
Yes. California Civil Code 841 requires you to provide written notice to your adjoining neighbor at least 30 days before beginning any work on a shared boundary, or 'partition fence.' This is a strict 2026 legal requirement in Fontana to avoid disputes over shared costs and maintenance liability.