Top Fencing Companies in Fontana, CA, 92316 | Compare & Call

There are 229 fencing companies server in Fontana CA

Jorge’s Mobile Welding

Jorge’s Mobile Welding

Fontana CA 92335
Fences & Gates, Decks & Railing, Metal Fabricators

Jorge’s Mobile Welding in Fontana, CA specializes in metal fabrication, fence and gate installation, repair, and weatherproofing. The business directly addresses local issues such as chain link fence ...

L.A. Fence

L.A. Fence

Rancho Cucamonga CA 91730
Fences & Gates

L.A. Fence serves Rancho Cucamonga and the surrounding Inland Empire with a full range of fence and gate solutions. We install, repair, paint, stain, and weatherproof fences and gates for residential ...

Maciel Masonry

Maciel Masonry

★★★★☆ 3.6 / 5 (14)
7078 E Ave, Rancho Cucamonga CA 91739
Masonry/Concrete, Fences & Gates, Tree Services

Maciel Masonry has been a trusted name in Rancho Cucamonga and the Inland Empire since the 1980s. Founder Robert began his masonry career in 1959 in Pomona, bringing decades of hands-on experience to ...

Cara Ironworks

Cara Ironworks

★★★★☆ 4.2 / 5 (5)
4329 State St Unit H, Montclair CA 91763
Fences & Gates, Metal Fabricators

Cara Ironworks is a family-owned metal fabrication shop, operating since 2018 from our base in Montclair, CA. We specialize in wrought iron projects including gates, handrails, and custom doors, while...

Sol And Moon Welding

Sol And Moon Welding

★★★★★ 5.0 / 5 (1)
Fontana CA 92337
Fences & Gates, Metal Fabricators

Sol and Moon Welding serves residents across Fontana, California, specializing in residential welding and metal fabrication. We create custom steel fences, automatic and manual gate repairs, as well a...

Grey's Fence

Grey's Fence

Fontana CA 92335
Fences & Gates

Grey's Fence has been serving Fontana, CA homeowners with reliable fence and gate solutions for years. Located near the Auto Club Speedway and just minutes from Fontana Park, we understand the unique ...

DTB N Rod Iron Fenc

DTB N Rod Iron Fenc

Fontana CA 92335
Fences & Gates

DTB N Rod Iron Fenc, based in Fontana, CA, specializes in durable fencing and gate solutions tailored for local homeowners. We understand the unique challenges of the Inland Empire, such as fence dama...

BMG Iron Works

BMG Iron Works

★★★★☆ 4.0 / 5 (13)
10088 6th St, Rancho Cucamonga CA 91730
Metal Fabricators, Fences & Gates

BMG Iron Works is a metal fabrication company serving Rancho Cucamonga, CA, with over 30 years of experience in wrought iron, steel fabrication, and fence and gate services. We specialize in custom ir...

Macias General Welding

Macias General Welding

★★★★★ 5.0 / 5 (1)
15136 Washington Dr, Fontana CA 92316
Metal Fabricators, Fences & Gates

Macias General Welding has been serving the Fontana, CA area since 1993. Starting with diesel truck repairs and holding over 20 welding certificates, the business evolved into a full-service metal fab...

Santos Construction

Santos Construction

9192 Citrus Ave, Fontana CA 92335
Roofing, Patio Coverings, Fences & Gates

Santos Construction, based in Fontana, CA, specializes in roofing, patio coverings, fences, and gates. The team understands local challenges like fence expansion damage from heat and soil erosion arou...



Estimated Fencing Costs in Fontana, CA

Emergency Fence/Gate RepairStorm / Security Response
$344 - $469
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,244 - $1,664

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Fontana. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

How deep should my fence posts be set in Fontana?

All structural posts in Southridge require a footing depth of at least 36 inches to be stable. The IRC mandates a minimum of 12 inches below the local 12-inch frost line to prevent frost heave. Posts set shallower than this will uplift and fail during winter temperature cycles.

How soon can a crew start my fence project in Southridge?

After a site consultation, we typically schedule excavation within 10-14 days. Our route from the Auto Club Speedway via I-10 allows for a consistent 25-35 minute response time to Southridge for initial assessments. We confirm the schedule after utility marks are clear and the City permit is issued.

What are the height and placement rules for a residential fence in Fontana?

Zoning limits are 3 feet in the front yard and 6 feet in the rear, measured from the ground. A 0-foot setback allows building directly on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections. This is critical for safety near high-traffic corridors like I-10, where visibility for drivers is non-negotiable.

What fence materials work best with Fontana's soil and pest conditions?

Material compatibility is essential. The moderate soil corrosivity index requires G90 galvanized steel posts and fasteners to prevent rust streaks. Given the moderate to heavy termite risk, avoid untreated wood in direct ground contact. Use pressure-treated lumber rated for ground contact or superior non-organic materials like vinyl or composite.

Is my fence designed to handle high winds?

It must be. Fontana's 95 MPH V-ult wind speed rating dictates the structural design. This engineering standard determines post spacing, concrete footing size, and bracket strength. Fences near the Auto Club Speedway experience higher exposure, requiring robust designs to survive peak storm season gusts without panel failure or uplift.

What is the first step before digging fence post holes?

You must call 811, the Underground Service Alert of Southern California, at least two working days before digging. Hitting a gas, water, or fiber line in Southridge is a major liability that incurs repair costs and fines. A professional crew manages this call and pulls the required permit from the Fontana permit office to ensure the project is documented and legal.

Can I have a smart gate for my pool area?

Yes, but integration is key. Any gate providing pool access must be ASTM F2286 / ICC-ES compliant with self-closing and self-latching hardware. High-trend smart gate systems now integrate IoT-controlled latches that log access, meeting modern liability standards for California homeowners by providing both convenience and a verifiable safety audit trail.

Am I legally required to talk to my neighbor before building a fence on our shared property line?

Yes. California Civil Code 841 requires you to provide written notice to your adjoining neighbor at least 30 days before beginning any work on a shared boundary, or 'partition fence.' This is a strict 2026 legal requirement in Fontana to avoid disputes over shared costs and maintenance liability.



Scroll to Top
CALL US NOW