Top Fencing Companies in Fresno, CA, 93611 | Compare & Call
There are 236 fencing companies server in Fresno CA
Center State Fence & Iron Company, based in Laton, CA, has been serving the community since 2005. Owner-operated and licensed, the company specializes in all types of fencing and gates, including chai...
AWF Anywhere Fencing is a locally owned and operated residential fencing company serving Fresno and Clovis, California. We specialize in fence and gate installation, repair, painting, staining, and we...
CJM Roofing is a family-owned and operated roofing contractor based in Fresno, CA, serving the Central Valley. Founded in 2019 by Colton and his wife Madison, the company was built on a foundation of ...
Slag Welding and Repair provides on-site, mobile welding and repair services throughout Fresno and the Central Valley. We handle residential, commercial, and agricultural work—fixing gates, trailers, ...
Central Valley Automated
Central Valley Automated Inc., based in Fresno, CA, began in 1996 as Dynaram Construction Corporation and continues a legacy of superior service in access control and perimeter security. With over 20 ...
C & H Fence & Patio has been a family-owned and operated business in Delano since 1967. For over 50 years, we have specialized in custom fencing, ornamental iron, and patio enclosures for residential,...
Sanger Fence Co, a family-owned and operated fence contractor based in Sanger, CA, has been serving California since its founding by owner Sam Renteria. With a philosophy of building ""Another Quality...
Hoffpauir Contractors, based in Fresno, CA, provides affordable metal fabrication, custom fences, and security door installation. With over eight years of welding experience, I offer MIG, flux, and st...
The Iron Shop in Fresno, CA, has been crafting custom ornamental ironwork since 2005. What started as work for government agencies quickly evolved into a passion for creating unique, standout pieces f...
AutoGate Supply in Fresno, CA, is a trusted source for residential, commercial, and industrial gate and garage operators. With a large stock available for same-day pickup, we serve contractors and exp...
Estimated Fencing Costs in Fresno, CA
Frequently Asked Questions
What are the requirements for a pool fence with a smart gate?
Pool barriers must meet ASTM F1908-16 and CA Health & Safety Code 115922, specifying self-closing, self-latching gates with latches 54 inches above grade. Modern IoT-integrated smart gates can meet this standard with certified magnetic locks and automatic closure sensors. This integration provides access logs, which are becoming a standard liability defense for California homeowners.
How deep should fence posts be set in Fresno?
Posts require a minimum 12-inch footing below the finish grade, set below the local 12-inch frost line to prevent frost heave. In the Tower District's expansive clay soils, posts set shallower than 24 inches often tilt or fail within two seasons. The IRC mandates footings below the frost line; we pour concrete footings to 30 inches for critical stability.
What are the height and setback rules for fences in Fresno?
Fresno zoning limits front yard fences to 3 feet and rear yard fences to 7 feet. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, especially near high-traffic corridors like CA-41, a 15-foot visibility 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet tall.
What fence materials work best in Fresno's soil?
Fresno's moderate soil corrosivity index and moderate termite risk demand material compatibility. Pressure-treated pine or cedar is standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. In designated historic zones near the Tower Theatre, material usage is restricted—often requiring wood replicas instead of vinyl or composite.
Is my fence designed for Fresno's wind?
Fences in Fresno are engineered for a V-ult wind speed of 95 mph per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For open exposures near CA-41, we reduce standard 8-foot panel spans to 6 feet and use through-bolt connections to survive peak storm season gusts without racking or failure.
How soon can you start a fencing project in the Tower District?
We typically schedule a site consultation within 48-72 hours of inquiry. Our standard route from the Tower Theatre landmark uses CA-41 for direct access, resulting in a 25-35 minute dispatch window for most Tower District addresses. Project start dates are set after utility locates are clear and the City permit is issued.
What is required before digging fence post holes?
State law requires contacting Underground Service Alert of Northern California at 811 at least two working days before any excavation. In the Tower District, hitting a gas, fiber, or irrigation line is a major liability causing service outages and fines. We manage the 811 ticket and coordinate all required City of Fresno permit office paperwork prior to mobilization.
Do I need to notify my neighbor before building a fence in Fresno?
Yes. For any fence on a shared boundary, California Civil Code 841 requires formal written notice to adjoining landowners at least 30 days prior to construction. As of 2026, this notification must include a project description and proposed cost-sharing details. Failure to provide this notice is a legal defect and can halt the project.