Top Fencing Companies in Fresno, CA, 93611 | Compare & Call
There are 236 fencing companies server in Fresno CA
Since 2016, Automatic Gate Operations in Ceres, CA has provided professional gate and metal fabrication services for residential, commercial, and school properties. Owner John Randisi brings over 20 y...
Town and Country Fence, based in Ceres, CA, is a licensed contractor (CSCL # 969314) founded in 2012 by a veteran of the laborers’ union with over 20 years of fencing experience. We specialize in both...
Andy's Access Doors and Gates
Andy's Access Doors and Gates provides expert garage door services and fence solutions to residents and businesses in Fresno, CA. Located near the Tower District and just minutes from Fresno City Coll...
Guizar Welding and Handy Man
Guizar Welding and Handy Man, based in Merced, CA, specializes in fence and gate services, masonry/concrete work, and junk removal. Many Merced homes face fence expansion damage and soil erosion aroun...
Absolute Roofing, based in Fresno, CA, is a family-owned licensed contractor serving California, Arizona, and Nevada. We specialize in both commercial and residential roofing, insulation, painting, an...
Fresno Fence has been serving Fresno, CA, for over 15 years as a licensed and insured fencing contractor. We specialize in custom wood, vinyl, chain-link, and ornamental iron fences for residential, c...
E & G Landscaping serves Fresno, CA, offering lawn care, tree services, and fence and gate solutions. Located near the Tower District and Fresno State, the team understands local challenges like soil ...
Reign Landscaping Maintenance, serving Fresno, CA, specializes in landscaping, fence and gate installation, repair, and maintenance. Our team addresses common local fencing issues like panel cracking ...
Jorge M Welding is a trusted metal fabrication and fencing company serving Fresno, CA, and the surrounding areas. We specialize in installing, repairing, painting, staining, and weatherproofing fences...
Custom Ornamental Iron Mobile Welding and Repair
Custom Ornamental Iron Mobile Welding and Repair serves Fresno, CA, tackling common local fencing problems like rusting metal components and discoloration caused by the area's dry heat and occasional ...
Estimated Fencing Costs in Fresno, CA
Frequently Asked Questions
What are the requirements for a pool fence with a smart gate?
Pool barriers must meet ASTM F1908-16 and CA Health & Safety Code 115922, specifying self-closing, self-latching gates with latches 54 inches above grade. Modern IoT-integrated smart gates can meet this standard with certified magnetic locks and automatic closure sensors. This integration provides access logs, which are becoming a standard liability defense for California homeowners.
How deep should fence posts be set in Fresno?
Posts require a minimum 12-inch footing below the finish grade, set below the local 12-inch frost line to prevent frost heave. In the Tower District's expansive clay soils, posts set shallower than 24 inches often tilt or fail within two seasons. The IRC mandates footings below the frost line; we pour concrete footings to 30 inches for critical stability.
What are the height and setback rules for fences in Fresno?
Fresno zoning limits front yard fences to 3 feet and rear yard fences to 7 feet. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, especially near high-traffic corridors like CA-41, a 15-foot visibility 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet tall.
What fence materials work best in Fresno's soil?
Fresno's moderate soil corrosivity index and moderate termite risk demand material compatibility. Pressure-treated pine or cedar is standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. In designated historic zones near the Tower Theatre, material usage is restricted—often requiring wood replicas instead of vinyl or composite.
Is my fence designed for Fresno's wind?
Fences in Fresno are engineered for a V-ult wind speed of 95 mph per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For open exposures near CA-41, we reduce standard 8-foot panel spans to 6 feet and use through-bolt connections to survive peak storm season gusts without racking or failure.
How soon can you start a fencing project in the Tower District?
We typically schedule a site consultation within 48-72 hours of inquiry. Our standard route from the Tower Theatre landmark uses CA-41 for direct access, resulting in a 25-35 minute dispatch window for most Tower District addresses. Project start dates are set after utility locates are clear and the City permit is issued.
What is required before digging fence post holes?
State law requires contacting Underground Service Alert of Northern California at 811 at least two working days before any excavation. In the Tower District, hitting a gas, fiber, or irrigation line is a major liability causing service outages and fines. We manage the 811 ticket and coordinate all required City of Fresno permit office paperwork prior to mobilization.
Do I need to notify my neighbor before building a fence in Fresno?
Yes. For any fence on a shared boundary, California Civil Code 841 requires formal written notice to adjoining landowners at least 30 days prior to construction. As of 2026, this notification must include a project description and proposed cost-sharing details. Failure to provide this notice is a legal defect and can halt the project.