Top Fencing Companies in Fresno, CA, 93611 | Compare & Call
There are 236 fencing companies server in Fresno CA
Three Warriors Fence, based in Madera, CA, is a local fencing contractor serving homeowners and businesses throughout the area. We specialize in fence and gate installation, repair, painting, staining...
Selma Fence, based in Selma, CA, specializes in fence and gate solutions tailored to local challenges. The area's frequent issues with rusting metal components and aging fence materials are expertly a...
Goldenridge Madera Fencing is your trusted local fencing expert in Madera, CA, serving the community with reliable fence and gate repairs. Many Madera homeowners face everyday issues like broken gate ...
G A General Construction
G A General Construction is a full-service general contractor serving Modesto, CA, and the surrounding areas. From kitchen and bathroom remodels to new home construction and ADU builds, they handle a ...
Got Junk in Lemoore, CA is your local partner for junk removal, tree services, and fencing solutions. We offer comprehensive hauling from appliance and battery disposal to construction debris and stor...
Blanco Construction
Blanco Construction in Atwater, CA, is a licensed general contractor (CA license #1059434) established in 2019, serving the Central Valley. The company provides affordable, quality home renovations, s...
Estimated Fencing Costs in Fresno, CA
Frequently Asked Questions
What are the requirements for a pool fence with a smart gate?
Pool barriers must meet ASTM F1908-16 and CA Health & Safety Code 115922, specifying self-closing, self-latching gates with latches 54 inches above grade. Modern IoT-integrated smart gates can meet this standard with certified magnetic locks and automatic closure sensors. This integration provides access logs, which are becoming a standard liability defense for California homeowners.
How deep should fence posts be set in Fresno?
Posts require a minimum 12-inch footing below the finish grade, set below the local 12-inch frost line to prevent frost heave. In the Tower District's expansive clay soils, posts set shallower than 24 inches often tilt or fail within two seasons. The IRC mandates footings below the frost line; we pour concrete footings to 30 inches for critical stability.
What are the height and setback rules for fences in Fresno?
Fresno zoning limits front yard fences to 3 feet and rear yard fences to 7 feet. The standard setback is 0 feet, allowing construction directly on the property line. For corner lots, especially near high-traffic corridors like CA-41, a 15-foot visibility 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet tall.
What fence materials work best in Fresno's soil?
Fresno's moderate soil corrosivity index and moderate termite risk demand material compatibility. Pressure-treated pine or cedar is standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. In designated historic zones near the Tower Theatre, material usage is restricted—often requiring wood replicas instead of vinyl or composite.
Is my fence designed for Fresno's wind?
Fences in Fresno are engineered for a V-ult wind speed of 95 mph per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For open exposures near CA-41, we reduce standard 8-foot panel spans to 6 feet and use through-bolt connections to survive peak storm season gusts without racking or failure.
How soon can you start a fencing project in the Tower District?
We typically schedule a site consultation within 48-72 hours of inquiry. Our standard route from the Tower Theatre landmark uses CA-41 for direct access, resulting in a 25-35 minute dispatch window for most Tower District addresses. Project start dates are set after utility locates are clear and the City permit is issued.
What is required before digging fence post holes?
State law requires contacting Underground Service Alert of Northern California at 811 at least two working days before any excavation. In the Tower District, hitting a gas, fiber, or irrigation line is a major liability causing service outages and fines. We manage the 811 ticket and coordinate all required City of Fresno permit office paperwork prior to mobilization.
Do I need to notify my neighbor before building a fence in Fresno?
Yes. For any fence on a shared boundary, California Civil Code 841 requires formal written notice to adjoining landowners at least 30 days prior to construction. As of 2026, this notification must include a project description and proposed cost-sharing details. Failure to provide this notice is a legal defect and can halt the project.