Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Carlos Fence Company is a locally owned and operated fencing contractor based in Inglewood, California, with over 11 years of experience serving Los Angeles and its neighboring communities. We special...
West Coast Concrete Services
West Coast Concrete Services, owned by Albert, has been serving Wilmington and the greater Los Angeles area since 2000. We specialize in a full range of concrete and masonry work, including driveway c...
Straight Gate Fence has been serving Lakewood and the greater Los Angeles/Orange County area since 1982, bringing over four decades of hands-on fence and gate expertise. What started as a family busin...
CityWide Garage Doors and Gates
CityWide Garage Doors and Gates has been a family-owned business serving Los Angeles since 2010, bringing over 18 years of industry expertise to every project. We specialize in garage door and gate se...
Gate & Garage Masters, owned by Tommy, has been serving Woodland Hills and the surrounding San Fernando Valley since 2021. We specialize in fence and gate installation, repair, and automatic conversio...
Ergeon is a technology-driven outdoor construction company headquartered in Los Angeles, founded by two CS PhD serial entrepreneurs with a vision to empower homeowners. We specialize in fence and gate...
Image Outdoor is a family-owned and operated outdoor renovation company based in Los Angeles, CA, specializing in custom fences, gates, decks, and hardscape solutions. For nearly two decades, we have ...
Secure Path Gates is a family-owned business in Los Angeles, CA, founded and operated by David, who brings over 18 years of hands-on experience in fence and gate installation. Specializing in resident...
Top Notch Vinyl Fencing serves Sun Valley, CA, specializing in vinyl, aluminum, and iron fences, gates, and patio covers. We offer free in-home consultations to help you choose from a variety of color...
K Star Vinyl Fencing & Patio Covers
K Star Vinyl Fencing & Patio Covers, based in Commerce, CA, is a licensed contractor serving Los Angeles and Orange Counties. Specializing in durable and low-maintenance solutions, they install vinyl ...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
