Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Z Z Welding is a licensed mobile welding service based in Pomona, CA, with over 10 years of experience in metal fabrication, fence and gate installation, repair, and painting or staining. Owner Z, an ...
Nicks Vinyl Fence, based in Montebello, CA, specializes in vinyl fence sales and installation for both residential and commercial properties. Founded by an owner who started with vinyl windows, the co...
B & M Fences serves Harbor City, CA, providing expert fence and gate installation, repair, painting, staining, and weatherproofing. Located near the Harbor City Community Center and close to the 110 F...
Since 2022, Beyond Lumber in Gardena, CA has supplied premium hardwoods, thermally modified wood, and composite building materials for decks, fences, cladding, and siding. Their inventory includes sus...
Young Kim Iron Works serves Los Angeles, CA, specializing in fence and gate installation, repair, and maintenance. Many local homes face rusting metal fence components and chain link fence corrosion d...
South Pacific Fence, based in Compton, CA, is a licensed fence and gate installation company with over 20 years of experience serving the Greater Los Angeles and Orange County areas. We specialize in ...
Precision Iron Solutions
Precision Iron Solutions, based in Ontario, CA, specializes in custom iron and vinyl fabrication for fences and gates. Serving both contemporary and historical architectural styles, the company design...
Star Fence has been serving homeowners in South El Monte and surrounding areas with reliable fence and gate solutions. We understand the unique needs of local properties, from privacy fence panels dam...
Murillo’s Vinyl Fencing serves homeowners in Apple Valley, CA, specializing in fence and gate installation, repair, and siding services. Located near the Apple Valley Town Hall and just off Highway 18...
Imperial Iron Works, based in South El Monte, CA, has been a trusted name in fences and gates since its founding in 1983 by one of three brothers originally part of Iron King. With decades of experien...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
