Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
R&C Vinyl Fencing, based in South Gate, CA, provides a full range of fence and gate services to local homeowners and businesses. From installing new vinyl, wood, or metal fences to repairing and weath...
Cardenas Welding & Iron Works
Cardenas Welding & Iron Works has served Los Angeles since 1990, bringing 35 years of hands-on experience in ornamental ironwork. The company specializes in custom iron fences and gates, handrails, wi...
Newage Outdoor Designs is a small, dedicated team based in Los Angeles, CA, specializing in metal fabrication, fences, and gates. We provide high-quality work at reasonable prices, serving both large ...
Marco's Ornamental Iron Works
Marco's Ornamental Iron Works, located in Gardena, CA, specializes in custom metal fabrication, fences, gates, and deck construction. For local homeowners, common fencing issues include soil erosion a...
Castillo’s metal & wood is a trusted local shop in Inglewood, CA, specializing in fences, gates, decks, and custom metal fabrication. In a city where shifting soils cause fence post movement and salty...
HomeFix Pros LLC is a trusted handyman service based in Los Angeles, CA, specializing in deck construction, design, repair, and replacement, as well as door and floor installation and repair. We also ...
Diago Gate & Fence Repair is a family-owned business serving homeowners in Hawthorne, CA. We specialize in installing and repairing wood, iron, vinyl, and chain link fences, as well as manual and auto...
InteleGates, Inc. is a family-owned electric gate company based in Manhattan Beach, CA, serving Los Angeles and Orange County for over 20 years. Founded by Ron, who brought decades of industry experie...
Element Construction Masonry and Paving Company, known locally as Element Pavers, is a licensed and insured masonry and landscaping contractor serving Lomita, CA. We specialize in paver installations,...
A G Handyman Services offers comprehensive home repair and maintenance solutions to residents of Compton and surrounding areas. Our team handles everything from appliance installation and repair to dr...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
