Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Vinyl Concepts, based in Torrance, CA, has been a trusted name in custom outdoor products since 2005. Founder Rick started in the fence business in 1985 and sold his first vinyl fence in 1988, bringin...
Pro Vinyl Fencing is a family-owned and operated business that has been serving Burbank and the greater Los Angeles area since 1998. We specialize exclusively in vinyl products, including fence and ga...
Zeus Custom Ironworks is a family-owned welding business based in Los Angeles, CA, established in 2009. With over a decade of experience, we specialize in custom ironworks, including fences, gates, st...
Torrance Fence Company
Torrance Fence Company is a family-owned business serving the South Bay area, including Torrance, CA, for over 15 years. We specialize in custom fabrication and installation of vinyl, aluminum, and wo...
JCR Iron Works, a family-owned business based in Los Angeles, CA, was founded in 2019 after I decided to leave my previous welding company and take a leap of faith to run my own operation. What drives...
Harwell Fencing & Gates is a family-owned business in Los Angeles, run by Arian Harwell and his father. With over 35 years of experience, they bring a furniture-building background to fencing, ensurin...
Coastline Gate Repair, owned by Tiffani, is a woman-led gate repair and installation company serving Marina del Rey, Santa Monica, Long Beach, and the Los Angeles area. Specializing in automatic and e...
I am the sole owner and operator of a handyman service based in Torrance, CA. My work covers a wide range of home repairs and improvements, including fence and gate installation and repair, furniture ...
HA in CA Fencing, based in Glendale, is a licensed contractor with over 25 years of construction experience, including 10 years working for other companies before obtaining a contractor license last y...
Paul's Iron Works
At Paul's Iron Works in Rosemead, CA, we carry forward a 38-year legacy of custom metal fabrication. Under new management by partners Randy and Bobby, we specialize in crafting custom-designed iron wo...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
