Top Fencing Companies in Gardena, CA, 90247 | Compare & Call
There are 238 fencing companies server in Gardena CA
Smartwood is a Gardena-based general contracting company with nearly 25 years of experience in building decks, fences, gates, and siding. We started as custom furniture craftsmen and evolved into spec...
Cuadras Fence is a licensed fencing company serving Compton and the surrounding South Bay area. Based in Compton, we specialize in the installation, repair, and customization of residential and commer...
Cardenas Fencing has been serving City of Industry and nearby neighborhoods for over 10 years, offering expert fence and gate installation and repair. We specialize in wood, vinyl, and wrought iron fe...
Practic Vinyl Fencing, based in Rosemead, CA, has been serving Los Angeles County and northern Orange County since 2013. We specialize in vinyl fences, gates, patio covers, wall toppers, and pergolas ...
Johnny & Anaya's Wrought Iron Works has been a trusted name in Long Beach for over 30 years, specializing in custom forged designs for interior and exterior railings, sliding gates, and swinging gates...
Miracle Garage Doors and Gates serves West Hollywood, CA, providing expert repair and installation for garage doors, fences, and gates. Local homeowners often struggle with gate misalignment due to fr...
Elevate Outdoor Pros
Elevate Outdoor Pros, based in Encino, CA, is a licensed CSLB contractor with over 10 years of experience transforming properties across Los Angeles County. We specialize in custom gates, fences, rail...
LA Gates, established in 2015, is a professional gate and garage door service company based in Santa Monica, CA. With over 12 years of experience, our team focuses on delivering exceptional customer s...
Value Up Renovation & Construction
Founded by Eddie Faygenov over a decade ago, Value Up Renovation & Construction brings hands-on expertise to every project in Los Angeles County. Eddie started on the tools and still oversees jobs, en...
A&P Gate Fence is a family-owned business in Valley Village, CA, with over 10 years of hands-on experience in custom gate and fence installation. We specialize in motorized and manual driveway gates, ...
Estimated Fencing Costs in Gardena, CA
Q&A
What are the height and setback rules for a fence in Gardena?
Gardena zoning enforces a 3.5-foot height limit for front yards and 6 feet for rear yards. The standard setback is 0 feet, allowing construction on the property line. However, corner lots must maintain a clear 'sight triangle' for visibility, a critical rule near high-traffic corridors like I-110.
What fencing material holds up best in Gardena's soil?
Material selection must defeat two factors: moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated lumber, composite, or aluminum are compatible. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil index.
How soon can a crew start a project in North Gardena?
A consultation typically schedules within 48 hours. The standard route from Rowley Memorial Park uses the I-110 corridor, resulting in a 25-35 minute response window. Mobilization for work follows after DigAlert clearance and permit issuance, with labor factored at a $45/hour average rate.
How deep must fence posts be set in Gardena?
Posts require a minimum 12-inch concrete footing below the local frost line. The IRC mandates this to prevent frost heave, which lifts and racks posts in North Gardena’s moderate-clay soil. A 110 MPH V-ult wind rating further requires deeper embedment for overturning resistance.
Am I legally required to notify my neighbor before building a fence?
Yes. California Civil Code Section 841 defines a 'good neighbor' law for shared boundaries. In 2026, this requires written notice to adjoining owners in Gardena at least 30 days before replacing any partition fence. This formalizes cost-sharing discussions and prevents disputes.
Is a standard fence strong enough for Gardena's wind?
No. A 110 MPH V-ult wind load rating dictates structural design. This engineering standard requires closer post spacing (often 6 feet on-center), continuous concrete footings, and wind-rated structural brackets. These measures resist peak storm season gusts, especially in exposed areas near I-110.
What is required before digging fence post holes?
State law requires a utility locate request via DigAlert (811) at least two working days before excavation. Hitting a gas or fiber line in North Gardena incurs major repair costs and liability. The contractor typically manages this ticket and any associated Gardena permit office paperwork.
Can I install an automated smart gate with a pool?
Yes, but the gate hardware must integrate with pool safety codes. An IoT-operated latch must also meet ASTM F1908-16 and IBC Section 3109 for self-closing, self-latching mechanisms. This dual-compliance is now standard for liability protection in California, merging the high smart-gate trend with mandated safety.
