Top Fencing Companies in Irvine, CA, 92602 | Compare & Call
There are 237 fencing companies server in Irvine CA
Dan's Quality Fences is a licensed and insured fence contractor serving Huntington Beach, CA. As a small, dog-loving, surf-oriented business, we take the same care building your fence as we would our ...
Smartwood is a Gardena-based general contracting company with nearly 25 years of experience in building decks, fences, gates, and siding. We started as custom furniture craftsmen and evolved into spec...
Cuadras Fence is a licensed fencing company serving Compton and the surrounding South Bay area. Based in Compton, we specialize in the installation, repair, and customization of residential and commer...
Practic Vinyl Fencing, based in Rosemead, CA, has been serving Los Angeles County and northern Orange County since 2013. We specialize in vinyl fences, gates, patio covers, wall toppers, and pergolas ...
Johnny & Anaya's Wrought Iron Works has been a trusted name in Long Beach for over 30 years, specializing in custom forged designs for interior and exterior railings, sliding gates, and swinging gates...
A&P Gate Fence is a family-owned business in Valley Village, CA, with over 10 years of hands-on experience in custom gate and fence installation. We specialize in motorized and manual driveway gates, ...
Barron Fence Company serves Los Angeles and Southern California with residential and commercial fence and gate solutions. We handle installation, repair, painting, staining, and weatherproofing for bo...
Legacy Fence is a licensed, bonded, and insured family business serving Tustin, CA, with over 30 years of combined experience in fence and gate solutions. We specialize in vinyl, wood, and chain link ...
A-M Fence Works is a Santa Ana-based fence and gate specialist with over 35 years of industry experience. Owner-operator licensed since 2015, having spent nearly two decades at A-1 Fence Company as a ...
National Deck & Stair
National Deck & Stair, a family-owned and operated Los Angeles company, has served Huntington Park and the surrounding areas for nearly 20 years. We specialize in waterproof deck and stair coatings, o...
Estimated Fencing Costs in Irvine, CA
Q&A
How tall can my fence be in Irvine?
Irvine zoning limits are 3 feet in front yard setbacks and 6 feet in rear and side yards. The 0-foot setback allows building directly on the property line. For corner lots, especially near major corridors like the I-405, visibility 'sight triangles' are enforced. No structure can obstruct driver sightlines within 10 feet of the property corner intersection.
How soon can you start a consultation in Woodbridge?
We typically schedule consultations within 48 hours. Our route from the Irvine Civic Center via the I-405 to the Woodbridge neighborhood results in a 25-35 minute response window. We confirm the site address and provide an arrival window via text the morning of the consultation.
What are my legal obligations when building a fence on the property line?
California Civil Code 841 governs partition fences. For a fence on the shared boundary, you must provide written notice to the adjoining owner at least 30 days prior to construction in 2026. This 'good neighbor' law applies fully in Irvine and establishes cost-sharing rules. Failure to notify can result in legal disputes and removal orders.
Do I need concrete footings for my fence in Irvine?
Yes, concrete footings are a structural requirement. The 95 MPH V-ult wind speed rating for Irvine demands posts anchored to resist overturning. While there is no frost line in Southern California, proper footings prevent settling in moderate soils. In Woodbridge, we engineer footings to ASCE 7-22 standards for wind load, not frost heave.
Will my fence withstand Santa Ana wind events?
Only if engineered for the 95 MPH V-ult wind speed. This ultimate design wind speed dictates post spacing, concrete footing size, and bracket strength. A standard 6-foot fence in Woodbridge requires posts spaced no more than 8 feet apart with proper moment-base anchors to survive peak storm season gusts, especially with exposure from the I-405 corridor.
What is the best fence material for Irvine's climate?
Material compatibility is critical. The moderate soil corrosivity index and moderate to heavy termite risk in Irvine rule out untreated wood in ground contact. Use pressure-treated lumber rated for ground contact or non-organic materials like vinyl or aluminum. Specify hot-dip galvanized or stainless-steel fasteners to prevent rust streaks from corroding in the soil.
What are the steps before you start digging?
The first step is calling DigAlert 811 to mark all public utilities. This is a legal requirement. Hitting a line in Woodbridge carries major liability for repair costs and service disruption. We manage the DigAlert ticket and pull all necessary permits from the Irvine Civic Center permit office before any equipment arrives on site.
Can I have an automated gate for my pool area?
Yes, but it must integrate with pool safety codes. An automated gate system must comply with ASTM F1908-16 and California Title 24 for self-closing, self-latching hardware. The high trend toward smart-gate IoT allows for remote monitoring and audit logs, which help demonstrate compliance and manage liability for Woodbridge homeowners.