Top Fencing Companies in Lomita, CA, 90717 | Compare & Call
There are 239 fencing companies server in Lomita CA
The Iron Man Welding in Long Beach, CA, has been shaping metal since 2000. What began as a custom iron furniture shop grew into a full-service welding and fabrication company for both homes and busine...
A G Solution is a Long Beach, CA based contractor specializing in fences, gates, demolition, and drywall services. We understand that your property needs to be both secure and well-maintained. From in...
For over 30 years, Making the Old New Again has served Long Beach homeowners with honest, cost-effective remodeling and repair services. As a general contractor specializing in flooring, fences, and g...
Figueroa Landscaping, based in Carson, CA, is a family-run business rooted in a tradition of hard work and dedication. Owner Alex Figueroa learned the trade from his father, spending summers mowing la...
Long Beach Welding, established in 2018, is a licensed and fully insured metal fabrication company serving Long Beach and all of Southern California. We specialize in MIG, stick, and flux welding, off...
CG IRONWORKS is a Torrance-based metal fabrication company owned and operated by Richard, an LA City Certified welder with nearly 20 years of experience. After honing his craft at a small shop in Gard...
No Limit Fence has served Huntington Beach and surrounding areas for over 35 years as a family-owned, licensed, insured, and bonded C13 fence contractor. Specializing in residential, commercial, and a...
Casa Grande Landscaping serves Compton, CA, specializing in landscaping, fences and gates, and artificial turf. We tackle common local issues like fence expansion damage from heat and soil shifts, plu...
LC Ornamental Supplies
LC Ornamental Supplies is a family-owned metal fabrication business founded by Lucio Catalan in 2006. Based in Compton, we specialize in custom and standard iron fences, gates, handrails, balconies, t...
Kim Iron Works has been crafting custom ornamental wrought iron in Fullerton, CA since 1980. Founded by David, the business grew from a single workshop into a trusted manufacturer serving greater Los ...
Estimated Fencing Costs in Lomita, CA
Common Questions
What is required before digging fence post holes?
California law mandates contacting DigAlert (811) at least two working days before excavation. Striking an unmarked utility line in Lomita Central can result in major repair liabilities, service outages, and fines. The contractor should also pull a city permit from the Lomita Building Division, as the permit office requires the DigAlert clearance number on the application.
What are the legal steps for replacing a shared fence with my neighbor in Lomita?
California Civil Code 841 requires written notice to adjoining neighbors at least 30 days before construction begins on a partition fence. The 2026 update to this law strongly recommends sending this notice via certified mail for a verifiable record. Failure to provide proper notice can lead to disputes over cost-sharing and property lines.
What fencing materials are best for Lomita's soil and termite risk?
Given Lomita's moderate soil corrosivity and moderate-to-heavy termite risk, material compatibility is critical. Pressure-treated lumber or composite materials resist insect damage. For metal posts and fasteners, specify hot-dip galvanized steel or stainless steel to prevent rust streaks caused by soil moisture. Avoid untreated wood in direct ground contact.
How is a fence engineered to withstand Lomita's high winds?
Designs are based on a 105 mph V-ult wind speed rating per ASCE 7-22 standards. This ultimate wind load dictates specific post spacing, concrete footing mass, and bracket strength. For the peak storm season, a 6-foot solid fence in Lomita Central typically requires 8-foot post centers with reinforced corner and gate posts to survive gust forces.
What is the typical timeline for a consultation and project start?
After initial contact, a site consultation is typically scheduled within 2-3 business days. From the Lomita Railroad Museum, the route via I-110 allows for a consistent 25-35 minute dispatch window to most neighborhoods. Project start dates depend on material lead times and permit issuance, with construction often commencing 2-4 weeks after contract signing.
What are the height and setback rules for fences in Lomita?
Lomita zoning enforces a 3.5-foot height limit for front yard fences and 6 feet for rear yards. The standard setback is 0 feet, allowing installation on the property line. Critical exception: corner lots must maintain a clear 'sight triangle' at intersections. Fences near I-110 feeder roads cannot obstruct driver visibility, as defined by the city's public works department.
Can a smart gate system meet California's pool safety codes?
Yes. A properly integrated IoT gate system with automatic self-closing and self-latching mechanisms can comply with CA Health and Safety Code 115922 (ASTM F1908-08). The latch must engage from inside the pool area without manual operation. Modern systems log access attempts, providing a digital record that strengthens liability defense for homeowners.
How deep should fence posts be set in Lomita to prevent frost heave?
Posts require a minimum 12-inch footing depth to surpass the local frost line. In Lomita Central's moderate soils, posts set shallower than this will lift during winter temperature drops, causing structural failure. IRC Section R403.1.4 mandates this depth to ensure stability against seasonal ground movement.