Top Fencing Companies in Madera, CA, 93637 | Compare & Call
There are 236 fencing companies server in Madera CA
Ygf is a trusted provider of fence and gate services in Fresno, CA, addressing common local issues like sagging gates and fence expansion damage caused by the region's heat and soil shifts. Located ne...
Coons' Fences is a Clovis, CA-based fence and gate company serving residential and commercial clients. We specialize in installing, repairing, painting, staining, and weatherproofing fences made from ...
Kelly's Fencing provides comprehensive fence and gate services in Fresno, CA, including installation, repair, painting, staining, and weatherproofing. Local homeowners near Tower District, Fig Garden,...
Spence Fence, a licensed C13 contractor based in Visalia since 1977, specializes in custom fencing and gate solutions for residential, commercial, and industrial properties. Serving neighborhoods near...
Orozco Fencing is a trusted local fencing contractor serving Fresno, CA, and the surrounding areas. With years of experience, they specialize in fence repair, installation, and staining. Many Fresno h...
Gratitude Construction
Gratitude Construction is a licensed and bonded general contractor serving Fresno and Clovis, CA. We specialize in helping homeowners enjoy their property more through room additions, kitchen and bath...
Automated Access
Automated Access Inc. has been Fresno's trusted source for custom gate systems since 1989. We design, fabricate, and install every gate ourselves—100% of the work shown in our photos is our own. Our s...
The Fencing Guys & Automatic Gate Opener is a trusted local provider serving Fresno, CA, and the surrounding areas, including neighborhoods near Fig Garden Village and the Fresno Chaffee Zoo. With ove...
Armandos Fence has been serving Fresno, CA, and surrounding areas with expert fence and gate solutions. Located near the Tower District and just a short drive from Fresno State, we understand the uniq...
A Rodriguez Fence has been serving Clovis, CA, for over a decade, specializing in repairing and replacing fences damaged by wildfire exposure and rusting metal components. Located near Sierra Vista Ma...
Estimated Fencing Costs in Madera, CA
Common Questions
How do I make sure my fence can withstand high winds?
Madera's 95 MPH V-ult wind speed rating per ASCE 7-22 standards dictates the structural design. This requires reduced post spacing (often 6 feet on-center maximum), continuous concrete footings, and wind-rated brackets. A fence built to this standard will survive peak storm season gusts without panel failure.
What are the height and placement rules for a fence on my property?
Madera zoning limits fences to 3 feet in the front yard and 6 feet in the rear yard, with a 0-foot setback allowed on the property line. For corner lots, a clear 'sight triangle' must be maintained for traffic visibility, which is critical for properties near the high-volume CA-99 corridor.
Can I install an automatic gate for my pool area?
Yes, but it must integrate with California's pool safety code. The gate must be self-closing and self-latching, with the latch mechanism mounted at least 54 inches high. Modern IoT smart-gate systems can meet this standard with monitored latches, providing both convenience and compliance for 2026 liability concerns.
What are the legal requirements for replacing a shared fence with my neighbor?
California Civil Code 841 governs partition fences. As of 2026, you must provide a 30-day written Notice of Intent to your adjoining neighbor in Madera before replacing a shared boundary fence. This notice must include material specifications and a proposed cost share, initiating the formal good-faith process.
How soon can a consultation be scheduled?
Consultations are typically scheduled within 48 hours. Our route from the Madera County Courthouse uses CA-99 for direct access, ensuring a 15-20 minute response time to most addresses in Downtown Madera for an initial site assessment and project scope review.
What is required before digging fence post holes?
You must contact Underground Service Alert of Northern California at 811 at least two working days before excavation. Striking a utility line in the Downtown Madera neighborhood incurs major repair costs and liability. This locate ticket is also a prerequisite for submitting your permit application to the Madera Building Division.
What fence materials are best for Madera's soil and pest conditions?
Downtown Madera has moderate soil corrosivity and a moderate-to-heavy termite risk. Use pressure-treated lumber rated for ground contact or naturally resistant woods like cedar. All metal fasteners and hardware must be G90 galvanized or stainless steel to prevent rust streaks from corroding in the soil.
How deep should fence posts be set in Madera to prevent failure?
Post footings must extend a minimum of 12 inches below grade to be below the local frost line. In Downtown Madera, soil moisture from irrigation can lead to frost heave. The 2021 IRC mandates this depth for stability; posts set in shallow concrete will lift and rack within two seasons.
