Top Fencing Companies in North El Monte, CA, 91006 | Compare & Call

There are 186 fencing companies server in North El Monte CA

AVF - Aluminum & Vinyl Fencing

AVF - Aluminum & Vinyl Fencing

★★★★★ 5.0 / 5 (1)
3840 Oceanic Dr Unit 505-506, Oceanside CA 92056
Fences & Gates, Decks & Railing, Patio Coverings

AVF - Aluminum & Vinyl Fencing has served Oceanside, CA, and the wider San Diego County for decades, building a reputation for trust and experience in the fencing industry. We specialize in fence and ...

Garden Passages

Garden Passages

★★★★★ 4.7 / 5 (69)
17792 Metzler Ln Ste A, Huntington Beach CA 92647
Fences & Gates

Garden Passages, a family-owned business based in Huntington Beach, CA, has evolved from building custom gates in the owner's garage into a leading manufacturer of premium handmade gates across the co...

Fortify Fence

Fortify Fence

★★★★★ 5.0 / 5 (3)
Los Angeles CA 90032
Fences & Gates, Decks & Railing, Patio Coverings

Fortify Fence has served Los Angeles for over seven years, specializing in fence and gate installation and repair for residential and commercial properties. From wood and vinyl to chain link and custo...

GAMA'S IRON WORKS

GAMA'S IRON WORKS

★★★★★ 4.8 / 5 (37)
Chino Hills CA 91709
Fences & Gates

Gama's Iron Works is a licensed, family-owned business serving Chino Hills and surrounding areas since its establishment. We specialize in custom iron work, including side gates, driveway gates, and f...

Infante Fence

Infante Fence

★★★★☆ 4.3 / 5 (11)
Palmdale CA 93550
Fences & Gates

Infante Fence has served Palmdale, CA, for over 20 years, providing fence and gate solutions for residential, commercial, and agricultural properties. Based near the Antelope Valley Fairgrounds and se...

So Cal Fencing Solutions

So Cal Fencing Solutions

★★★★★ 4.7 / 5 (300)
230 E Dyer Rd Unit G, Santa Ana CA 92707
Fences & Gates

So Cal Fencing Solutions is an accredited fence contractor serving Santa Ana and all of Orange County, California. We specialize exclusively in high-quality vinyl fence and gate installations for resi...

Vinyl Land Fencing

Vinyl Land Fencing

★★★★★ 4.7 / 5 (18)
14153 Garvey Ave, Baldwin Park CA 91706
Fences & Gates

Vinyl Land Fencing, a family-owned business established in 2000, serves Baldwin Park and the greater Los Angeles area with high-quality vinyl fencing, gates, decks, and patio covers. We use materials ...

Ray & Son’s Fence

Ray & Son’s Fence

★★★★☆ 4.4 / 5 (32)
Highland CA 92346
Fences & Gates

Ray & Son’s Fence in Highland, CA, has been providing custom fencing and gate solutions for over a decade. We specialize in installation, repair, painting, staining, and weatherproofing for both manua...

HandyMaestro

HandyMaestro

★★★★★ 4.9 / 5 (136)
832 S Ynez Ave, Monterey Park CA 91754
Fences & Gates, Decks & Railing

Founded in 2019 by Dmitrii, HandyMaestro is a licensed fence and gate contractor serving Monterey Park and the greater Los Angeles area. With over 16 years of hands-on construction experience and a ba...

Flores Artscape

Flores Artscape

★★★★★ 4.5 / 5 (428)
3959 Eagle Rock Blvd, Los Angeles CA 90065
Landscaping, Masonry/Concrete, Fences & Gates

Flores Artscape, established in 2004 by husband-and-wife team Rumaldo and Miriam Flores, brings over 25 years of landscape industry experience to Los Angeles. As a licensed landscape contractor, the c...



Estimated Fencing Costs in North El Monte, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for North El Monte. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

What fencing materials hold up best against local environmental factors?

North El Monte's moderate soil corrosivity and moderate-to-heavy termite risk dictate material selection. Pressure-treated lumber, composite, or aluminum are primary choices. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Untreated wood and standard steel posts will corrode and attract subterranean termites.

What are the legal steps for replacing a shared fence in California?

California Civil Code 841 mandates written 30-day notification to adjoining neighbors for any work on a partition fence. As of 2026, this notice must include the proposed plan, cost estimate, and a citation of the statute. Failure to provide proper notice in North El Monte can result in liability for the full cost and removal.

What are the fence height and placement rules for my property?

North El Monte zoning limits fences to 3.5 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowing construction on the property line. Corner lots near I-605 require a clear 'sight triangle'—typically a 10-foot area from the curb intersection—free of visual obstructions over 3 feet high for traffic safety.

Why do fence posts in North El Monte require deep concrete footings?

The IRC requires footings to extend 12 inches below the local frost line to prevent frost heave. Posts set in shallow soil will lift during winter, causing structural failure. In North El Monte's moderate soil, a 24-inch deep, 10-inch diameter concrete footing per post provides essential stability against both frost and the 95 MPH V-ult wind load.

How do modern gate systems meet safety and security codes?

Integrated IoT smart-gate systems must comply with ASTM F2286 for pool barriers. This requires a self-closing, self-latching mechanism that engages automatically. Modern systems link this mechanical operation to digital access logs, creating an audit trail that meets updated liability standards for California homeowners.

What is the typical timeline for a consultation and project start?

Initial consultations are scheduled within 3-5 business days. Our team routes from Lambert Park via the I-605, with a standard 35-45 minute travel window to North El Monte. After the site assessment and permitting, project starts typically occur within 10-14 days, contingent on material lead times and DigAlert clearance.

What is required before digging fence post holes?

California law requires contacting DigAlert (811) at least two working days before excavation. Hitting a utility line in North El Monte creates major liability for repair costs and service disruption. The permit office also requires a site plan showing the fence location relative to property lines and structures; we manage this paperwork to ensure compliance.

How is a fence engineered to withstand high winds?

The 95 MPH V-ult wind speed rating dictates structural design. This requires closer post spacing (often 6 feet on-center instead of 8 feet), continuous concrete footings, and wind-rated brackets. The fence acts as a solid screen, creating significant uplift and lateral force that standard construction cannot survive during peak storm season gusts from the I-605 corridor.



Scroll to Top
CALL US NOW