Top Fencing Companies in Oakhurst, CA, 93644 | Compare & Call

There are 92 fencing companies server in Oakhurst CA

Steven's Reclaimed Lumber

Steven's Reclaimed Lumber

1733 Storey Rd, Madera CA 93638
Fences & Gates

Steven's Reclaimed Lumber, owned by Steven, is a family-run business in Madera, CA, dedicated to providing high-quality fence and gate services. We offer installation, repair, painting, staining, and ...

AG Solutions Construction

AG Solutions Construction

★★★★☆ 4.2 / 5 (6)
Fresno CA 93726
Masonry/Concrete, Fences & Gates

AG Solutions Construction is a family-owned general contractor based in Fresno, CA, with over 15 years of experience serving both residential and industrial clients. We specialize in masonry and concr...

AMCO Custom Iron

AMCO Custom Iron

★★★★☆ 3.7 / 5 (3)
2748 E Hamilton Ave, Fresno CA 93721
Fences & Gates, Decks & Railing, Metal Fabricators

AMCO Custom Iron has provided custom metalwork and fencing to Fresno and the Central Valley for over 20 years. Owner-operator leadership means direct oversight on every job, from initial design throug...

J&C Fencing

J&C Fencing

★★★★★ 5.0 / 5 (1)
Fresno CA 93725
Fences & Gates

J&C Fencing serves Fresno, CA, providing expert fence and gate services for local homeowners. From sagging gates in the Tower District to rusting metal fences near Fig Garden Village, the team address...

J N A Lawn and Garden Service

J N A Lawn and Garden Service

★★★★★ 4.6 / 5 (10)
Fresno CA 93702
Gardeners, Fences & Gates, Lawn Services

J N A Lawn and Garden Service is a locally owned business serving Fresno, CA. We specialize in garden care and fence work, including installation, painting, staining, repair, and weatherproofing. Our ...

Left Coast Weld

Left Coast Weld

★★★★★ 5.0 / 5 (3)
2812 N Argyle Ave Ste 111, Fresno CA 93727
Fences & Gates, Metal Fabricators, Trailer Repair

Left Coast Weld Co, based in Fresno, CA, provides a full range of metal fabrication services for residential, commercial, and industrial clients. Specializing in custom fences and gates, we handle eve...

Ygf

Ygf

★★★★☆ 4.4 / 5 (7)
Fresno CA 93722
Fences & Gates

Ygf is a trusted provider of fence and gate services in Fresno, CA, addressing common local issues like sagging gates and fence expansion damage caused by the region's heat and soil shifts. Located ne...

Spence Fence

Spence Fence

★★★☆☆ 2.8 / 5 (33)
1145 N Miller Park Ct, Visalia CA 93291
Fences & Gates

Spence Fence, a licensed C13 contractor based in Visalia since 1977, specializes in custom fencing and gate solutions for residential, commercial, and industrial properties. Serving neighborhoods near...

Gratitude Construction

Gratitude Construction

★★★★★ 4.8 / 5 (6)
3171 W Hampton Way, Fresno CA 93722
General Contractors, Fences & Gates, Patio Coverings

Gratitude Construction is a licensed and bonded general contractor serving Fresno and Clovis, CA. We specialize in helping homeowners enjoy their property more through room additions, kitchen and bath...

Armandos Fence

Armandos Fence

Fresno CA 93650
Fences & Gates

Armandos Fence has been serving Fresno, CA, and surrounding areas with expert fence and gate solutions. Located near the Tower District and just a short drive from Fresno State, we understand the uniq...



Estimated Fencing Costs in Oakhurst, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Oakhurst. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

How soon can you provide a consultation in Oakhurst?

We dispatch consultations within 24-48 hours. Our route from Oakhurst Community Park via CA-41 allows for a consistent 15-25 minute response window to most properties in the Oakhurst Town Center area. The consultation includes a site survey for zoning, wind exposure from the highway, and soil assessment, followed by a firm quote based on the $45/hr average labor rate.

Why do fence posts in Oakhurst need concrete footings?

The 12-inch frost depth in Oakhurst Town Center requires footings below the frost line. Posts set in shallow soil will heave upward during winter freezes, destroying fence alignment. The 2021 IRC requires footings to extend a minimum of 12 inches below grade in this climate zone to prevent frost heave failure.

What fence materials work best with Oakhurst soil and pests?

Oakhurst's moderate soil corrosivity index and termite risk require material compatibility. Pressure-treated pine posts must use G90 galvanized steel fasteners to prevent rust streaks. For full durability, specify a concrete-encased steel post or a naturally termite-resistant species like cedar. Vinyl is also suitable but requires UV-stabilized formulations for this region.

What is required before you start digging fence post holes?

You must call USA North 811 at least two business days before excavation. Hitting a buried utility line in Oakhurst Town Center carries major financial liability and repair costs. The service marks public lines; private lines require a separate private locate. We manage the Madera County permit office paperwork, which includes the site plan and the USA North 811 ticket confirmation.

How do you build a fence to withstand Oakhurst wind storms?

Design for the 105 MPH ultimate design wind speed (V-ult) per ASCE 7-22 standards. This engineering dictates post spacing, concrete footing size, and bracket strength. For a 6-foot fence in Oakhurst Town Center, standard 8-foot post spacing often fails. We specify 6-foot centers with 6x6 posts and reinforced concrete footings to survive peak storm season gusts from the CA-41 corridor.

Am I required to notify my neighbor before replacing our shared fence?

Yes. California Civil Code 841 requires written notice to adjoining property owners 30 days prior to construction on a shared boundary in Oakhurst. Since 2026, this notice must include the proposed fence design, a cost estimate, and a clear statement of the owner's rights and responsibilities. Failure to provide proper notice is a legal violation.

Do smart gates meet California pool fence laws?

Yes, if properly integrated. California Health & Safety Code 115922 requires pool barriers to be at least 5 feet high with self-closing, self-latching gates. A smart gate system must use an ASTM F1908-16 compliant latch that automatically engages. The motorized closing mechanism must meet the same force and timing standards as a traditional spring-hinge gate to limit liability.

What are the height limits for a fence on my Oakhurst property?

Oakhurst zoning enforces a 3-foot maximum height in front yards and a 6-foot maximum in rear yards. The 0-foot setback rule allows a fence directly on the property line, but corner lots near CA-41 must maintain a clear 'sight triangle.' This triangle keeps visibility unobstructed for traffic, typically requiring a 3-foot height limit within 10 feet of the street corner.



Scroll to Top
CALL US NOW