Top Fencing Companies in Oasis, CA, 92274 | Compare & Call
There are 185 fencing companies server in Oasis CA
Castro Metal Works is a Cathedral City-based fabrication company specializing in fences, gates, decks, railings, and patio coverings. Owner-operated, each project receives dedicated, hands-on attentio...
Catalina Metalworks is a licensed metal fabrication company serving Palm Springs and the Coachella Valley. We specialize in custom electric sliding gates and key access control products for residentia...
Desert Prestige Ornamental Iron, based in Palm Desert, CA, is a custom metal fabrication company specializing in gates, fencing, handrails, and welding repairs. We design and install both manual and a...
Serving the Coachella Valley since 2014, Coachella Valley Custom Gate & Fence brings over 20 years of combined fencing experience to every project. As a subsidiary of International Fence & Metal Suppl...
The Welding Shop in Indio, CA, specializes in custom fences and gates for residential and commercial properties. Located near the Indio Polo Grounds and along Highway 111, the shop addresses common lo...
International Fence & Concrete serves Indio and the broader Coachella Valley with over 20 years of experience in fencing, concrete, and masonry. Originally rooted in public works construction, the com...
Patton Door & Gate is a family-owned and operated business serving the Coachella Valley since 1972. Founded by Phil Patton, the company is now run by his children, Steve Patton and Debbie Johns, with ...
RC Welding and Fabrication
RC Welding and Fabrication is a trusted metal fabrication and fencing company serving Palm Desert, CA, and the surrounding Coachella Valley. Located near the intersection of Highway 111 and Portola Av...
Smiley's Metal Craft
Smiley's Metal Craft has been serving Desert Hot Springs and the entire Coachella Valley as a licensed metal fabricator since 1994. Specializing in custom entry metal doors, gates, and designer stairc...
Precision Garage Doors And Gates
Precision Garage Doors And Gates is a family-owned and operated business in Yucca Valley, co-owned by John and his wife Lisa. With over 25 years of experience serving the Morongo Basin and Coachella V...
Estimated Fencing Costs in Oasis, CA
Frequently Asked Questions
What fencing materials are best for Oasis soil and pest conditions?
Moderate soil corrosivity and a moderate-to-heavy termite risk dictate material selection. Galvanized steel posts with a powder-coated finish are recommended. For wood, use pressure-treated lumber rated for ground contact and stainless steel fasteners to prevent rust streaks. Avoid untreated wood and standard iron in direct soil contact, as corrosive salts and termites will compromise the structure within a few years.
What is the typical timeline for a consultation and project start?
After an initial call, a site consultation is typically scheduled within 3-5 business days. Our project manager will route from the Oasis Civic Plaza, take I-10 to your location, and arrive within the 25-35 minute window for Downtown Oasis. Pending permit approval and material lead times, physical work can usually commence within 10-14 days of the signed contract, barring unforeseen delays from the city.
What are the height and setback rules for a fence on my property line?
Oasis zoning allows a 3-foot maximum height in the front yard and 6 feet in the rear, measured from the grade. A 0-foot setback permits installation directly on the property line. However, for corner lots, a 10-foot 'sight triangle' from the property corner must remain clear of any visual obstruction higher than 3 feet. This is critical for properties near I-10 on-ramps to maintain driver visibility and is strictly enforced.
How is a fence designed to withstand Oasis wind loads?
The 110 MPH V-ult wind speed rating, per ASCE 7-22 standards, dictates structural design. This requires reduced post spacing (often 6 feet on-center maximum), concrete footings with a diameter-to-depth ratio of 3:1, and through-bolt brackets instead of surface-mounted hardware. This engineering is critical to survive peak storm season gusts channeled through the I-10 corridor without panel failure or uplift.
How deep should fence posts be set in Downtown Oasis to ensure stability?
Posts require a 12-inch minimum footing depth to resist frost heave, per California Building Code referencing IRC R403.1.4. In Downtown Oasis, soil moisture from the Civic Plaza irrigation can cause rapid freeze-thaw cycles. Setting posts above this line risks structural failure, as the ground will push the footing upward, cracking the foundation and warping the entire fence line.
What are the legal requirements for notifying a neighbor before a fence project?
California Civil Code 841 mandates written notice to all adjoining property owners at least 30 days prior to construction on a shared boundary. As of 2026, Oasis city code requires this notice to include the project scope, material specifications, and a copy of the permit application. Failure to provide this notice can result in a work stoppage order and potential civil liability for damages.
What is required before digging fence post holes?
State law requires contacting DigAlert via 811 at least two working days before excavation. In Downtown Oasis, hitting a gas, water, or fiber optic line is a major liability that can result in six-figure repair bills and service outages for the neighborhood. A professional crew manages this utility locate ticket and pulls the corresponding permit from the Oasis Development Services Department to ensure all work is documented and inspected.
How can a smart gate system comply with pool safety codes?
Modern smart gates integrate IoT-controlled, self-closing and self-latching mechanisms that meet ASTM F1908-16 standards required by California law. A system with a Wi-Fi-enabled magnetic latch and a video intercom provides both access control and a verifiable audit trail. This integration meets the 2026 liability standard for homeowners, demonstrating proactive safety management for pools and spas.