Top Fencing Companies in Oxnard, CA, 93001 | Compare & Call
There are 235 fencing companies server in Oxnard CA
Emuna Garage Doors and Gates, owned by Roze, has been serving West Hills and nearby neighborhoods since 2015. We specialize in repairing damaged garage doors, installing and repairing fences and gates...
Green Rise Garage And Gate is a family-owned business serving Winnetka, CA, specializing in garage door services and fence/gate installation and repair. Many local homes face common issues like chain ...
Westcoast Vinyl, based in Chatsworth, CA, has been installing and repairing fences and gates for over 16 years. Established in 2014, the company uses DURAMAX materials, which come with a lifetime warr...
Emerick’s Ironworks is a father-and-son metal fabrication business based in Buena Park, CA, serving all of Southern California since 1999. We specialize in custom wrought iron gates, fences, stairways...
Founded in 1972 by Robert Bennett, Fence Factory has grown from a small fence company into a trusted provider serving Ventura, Santa Barbara, Los Angeles, and San Luis Obispo counties. The Ventura loc...
Garden Service specializes in fence and gate installation and repair for homes in Ventura, CA. We understand that local homeowners face common issues like broken gate hardware and fence expansion dama...
All California Fencing, a family-owned business since 2015, serves Ventura with expert fence, gate, deck, patio cover, railing, gazebo, and arbor installations. Operating from a convenient Ventura bra...
All Season Fencing is a licensed and bonded C-13 fencing contractor based in Port Hueneme, CA, serving the tri-county area since 2002. Founded by a veteran and former military police officer with 20 y...
Jorge Salinas Tree Service
Jorge Salinas Tree Service is a family-owned and operated business in Ventura, CA, with over 15 years of experience serving the local community. We are fully licensed (CA 10318), insured, and bonded, ...
Bay City Fab is a Ventura, CA metal fabrication and fencing contractor located near the Pacific View Mall and the San Buenaventura Mission. They address common local fence failures caused by soil eros...
Estimated Fencing Costs in Oxnard, CA
Question Answers
How deep should my fence posts be in Oxnard?
Posts require footings extending below the 12-inch frost line. The 2021 California Residential Code (CRC), based on IRC standards, mandates this depth to prevent frost heave. In Downtown Oxnard's clay-heavy soil, a shallower footing will lift and crack the fence within two winters.
What fence materials hold up best in Oxnard's climate?
Material selection must address moderate termite risk and soil corrosivity. Pressure-treated wood or composite lumber is standard. For metal, specify G90 galvanized or powder-coated steel posts and fasteners. Using standard galvanized nails in this soil will cause rust streaks on siding within 18 months.
Is my fence designed for Oxnard's wind?
Structural design follows ASCE 7-22 for a 110 MPH V-ult wind speed. This engineering rating dictates post spacing (often 6 feet on-center maximum for a 6-foot fence), concrete footing diameter, and the use of through-bolt brackets instead of face-mounted nails. This prevents failure during the peak storm season from October to March.
How soon can a specialist assess my property?
A structural perimeter specialist can typically be dispatched within 48 hours. From our central dispatch near Plaza Park, the route via US-101 to most Downtown Oxnard properties results in a 25 to 35 minute travel window for the initial consultation and site survey.
What needs to happen before you dig the first post hole?
We initiate a ticket with Underground Service Alert of Southern California (call 811) for a utility locate. Hitting a gas or fiber line in Downtown Oxnard incurs major fines and repair liabilities. Concurrently, we pull the required permit from the Oxnard Development Services Department, which includes a site plan review for zoning compliance.
What are my legal obligations to my neighbor when building a fence?
California Civil Code 841 is the 'Good Neighbor Fence' law. As of 2026, you must provide a formal written notice to any neighbor sharing the property line before construction begins. This notice must detail the project, the proposed cost sharing, and a 30-day response period. Failure to notify can result in losing the right to recover shared costs.
Can I install an automatic smart gate with my pool fence?
Yes, but integration must comply with ASTM F2286 and California Health and Safety Code 115922. The gate's self-closing, self-latching mechanism must be primary; any IoT smart lock or remote release is a secondary feature. The system must default to a locked state during a power failure to maintain compliance and limit liability.
What are the height and placement rules for a fence in Oxnard?
Zoning limits are 3 feet in the front yard and 6 feet in the rear, with a 0-foot setback allowing construction directly on the property line. For corner lots, you must maintain a clear 'sight triangle' at intersections; no visual obstructions are permitted within 10 feet of the property corner. This is critical for safety near high-traffic corridors like US-101.