Top Fencing Companies in Pacheco, CA, 94553 | Compare & Call
There are 191 fencing companies server in Pacheco CA
We are The Expert Gate Company, a family-owned business in Concord, CA, run by my brother and me. I started working in the gates and fence industry in 2010, and after a combined 12 years of experience...
Reuben Borg Fence
Reuben Borg Fence Company, a family-owned business operating since 1998, provides personalized fencing and deck services to residential and commercial clients in San Ramon and the surrounding East Bay...
Automatic Gate Masters & Garage Doors is a family-owned business serving Palo Alto and the Bay Area for over 10 years. We specialize in automatic gate installation, repair, and custom fabrication usin...
Tier Fencing in Patterson, CA provides professional construction services for fences, gates, decks, and arbors. Our work includes redwood, IPE, and chain link fencing, as well as Trex, bamboo, and The...
WG Iron Repair is a San Jose-based business with over 10 years of experience specializing in the installation, repair, and maintenance of fences, gates, decks, and doors. We serve residential and comm...
Cal Preserving
Cal Preserving, founded by Bruce Watkins in 1987 while he was a student at UC Berkeley, combines his deck-building expertise with over 35 years of exterior wood care. Based in Mountain View, the compa...
FCR Fence & Deck, formerly known as Fresh Coat Restoration LLC, is a locally owned, licensed, and fully insured fence and deck contractor based in Martinez, CA. We provide a comprehensive range of ser...
Bay Area Automatic Gates, owned by David and operating since 1992, is a licensed, bonded, and insured gate contractor serving Milpitas and the greater Bay Area. Specializing in electric gate repair, i...
IVS Fences & Iron Works is a family-owned business serving Richmond, CA, and the surrounding Bay Area. Founded by Ignacio, who brings over a decade of ironwork expertise, the company specializes in cu...
Capital Automatic Gates is a family-owned gate service company based in Atherton, CA, with over 20 years of experience. Licensed and bonded (Lic. 1045215), they specialize in custom gate fabrication, ...
Estimated Fencing Costs in Pacheco, CA
Common Questions
How is a fence engineered for Pacheco's 110 MPH V-ult wind rating?
The 110 MPH V-ult wind speed dictates structural design. This requires closer post spacing (often 6 feet on-center), deeper concrete footings, and ASCE 7-22-compliant bracket connections. This engineering prevents failure during the peak storm season gusts common near I-680.
Am I legally required to notify my neighbor before building a fence in Pacheco?
Yes. California Civil Code 841 requires written notice to adjoining neighbors 30 days prior to construction or replacement of a shared boundary fence. In Pacheco, this 2026 requirement includes a good-faith cost estimate. Failure to comply can lead to disputes and liability.
What are the modern requirements for a pool fence and gate?
Pool barriers in California must meet ASTM F1908-16. Gates must be self-closing and self-latching. The moderate smart-gate trend in Pacheco integrates IoT latches that log access, adding a layer of liability protection by proving the gate was secured after use.
What are the height and setback rules for fences in Pacheco?
Pacheco zoning limits fences to 3 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowed on the property line. For corner lots near I-680, a clear 'sight triangle' is mandatory for driver visibility. Always verify your lot's specific zoning with the city permit office.
How soon can a fencing specialist start a project in Pacheco?
After the utility locate and permit are secured, a specialist can typically mobilize within a week. The standard route from the Pacheco Community Center via I-680 allows for a 25-35 minute consultation dispatch, with labor rates averaging $65 per hour for on-site work.
Which fencing materials work best with Pacheco's soil and climate?
Pacheco's moderate soil corrosivity and termite risk demand compatible materials. Use pressure-treated wood rated for ground contact or vinyl. For metal posts, specify hot-dip galvanized steel with stainless steel fasteners to prevent rust streaks from forming on the finish.
How deep should fence posts be set in Pacheco Valley?
Posts must be set below the 12-inch frost line. IRC Section R403.1.4 requires this to prevent frost heave, which lifts posts and destroys fence alignment. In Pacheco Valley's moderate soil, a 30-inch minimum depth with concrete is standard for stability.
What is the first step before digging fence post holes?
Call 811, the Underground Service Alert of Northern California, at least two business days before digging. Hitting a utility line in Pacheco Valley creates major liability and repair costs. This locate ticket is also required by the Pacheco permit office before they will issue your construction permit.
