Top Fencing Companies in Palmdale, CA, 91390 | Compare & Call
There are 238 fencing companies server in Palmdale CA
S & B Wrought Iron provides expert metal fabrication and fence installation for residents and businesses in Lancaster, California. We specialize in custom wrought iron fences, gates, and structural we...
Get Curb’d is a Lancaster, CA-based team specializing in signmaking, painting, and fences & gates. Lancaster’s desert climate often causes wood fence warping from intense heat, and many fences begin t...
Gator Steel Manufacturing & Welding is a family-owned business founded by William and Karen Kent in 1994. Starting with concrete saw manufacturing, the company evolved into a full-service metal fabric...
Tony Garage Door & Gate has served Barstow and the High Desert for over 20 years, specializing in roll-up gates, overhead doors, and custom iron fencing. Whether near the historic Harvey House or alon...
American Iron Work specializes in custom fences and gates for Lancaster, CA, addressing common local issues like rusting metal components and privacy fence panel damage. Serving neighborhoods near the...
Pepe's Welding has served Palmdale, CA, for over 20 years, providing reliable metal fabrication, fence installation, deck construction, and custom gate work. Whether you need a new deck, a repaired fe...
Refine Welding in Lancaster, CA, is run by Roberto, a local metal fabricator and fence specialist with over a decade of experience. After a baseball career that required steady hands and sharp hand-ey...
Andy's Handy in Lancaster, CA, is a general contracting company that handles a wide range of home improvement projects. From bathroom and kitchen remodels to deck construction and new room additions, ...
Avalos Fencing Construction provides fence and gate services to residential and commercial clients in Palmdale, CA, and surrounding areas. From new fence and gate installations to painting, staining, ...
Marq Remodeling provides painting, drywall, and fencing services to homes and businesses in Lancaster, CA. We handle interior and exterior painting, drywall installation, drywall repair, wall patching...
Estimated Fencing Costs in Palmdale, CA
Q&A
Am I legally required to notify my neighbor in Palmdale before a fence project?
Yes. California Civil Code 841, the 'Good Neighbor Fence Act,' requires written notice 30 days prior to work on a shared boundary. As of 2026, this includes electronic notification if agreed upon. Failure to notify can result in forfeiting cost-sharing rights.
Can a smart gate system meet California pool safety codes?
Yes, if integrated correctly. The gate must comply with ASTM F1908-16, requiring self-closing and self-latching mechanisms with the latch at 54 inches minimum height. IoT-controlled latches can meet this standard, providing audit trails and remote status checks, which is a growing trend for liability management.
What is the utility locate process before digging in Palmdale Central?
Call DigAlert (811) at least two working days before excavation. They mark public utility lines. Hitting an unmarked line in Palmdale Central is a major liability, leading to repair costs, fines, and service disruption. We manage the accompanying city permit paperwork, which requires these locates for approval.
How does Palmdale's 105 MPH V-ult wind rating affect fence design?
The 105 MPH ultimate design wind speed (V-ult) per ASCE 7-22 dictates structural requirements. This mandates closer post spacing (often 6 feet on-center max), deeper footings, and wind-rated brackets to resist peak storm season gusts, especially in exposed areas near CA-14. Standard residential fencing often fails this load.
How soon can a consultation be scheduled in Palmdale Central?
We typically schedule consultations within 48 hours. Our route from Marie Kerr Park via CA-14 allows for a consistent 25-35 minute response time to most Palmdale Central neighborhoods, barring major traffic incidents on the Antelope Valley Freeway.
What are the height and setback rules for a fence on my Palmdale property?
Palmdale zoning is 3 feet maximum in the front yard and 6 feet in the rear, with a 0-foot setback (on the property line). For corner lots near CA-14, a clear 'sight triangle' is enforced—typically no obstructions over 3 feet high within 10 feet of the intersection for driver visibility.
What fencing materials work best with Palmdale's soil and termite risk?
Palmdale has moderate soil corrosivity and termite risk. Use galvanized or powder-coated steel posts and hardware. Avoid untreated wood in ground contact. For wood components, use pressure-treated lumber rated for ground contact and stainless-steel fasteners to prevent rust streaks from corroding hardware.
Why do fence posts in Palmdale Central need to be set below 12 inches?
The Palmdale frost depth is 12 inches. Footings must extend below this line to prevent frost heave, which lifts posts and cracks panels. IRC Section R403.1.4 mandates this for stability in our climate. Posts set in shallow concrete will fail within two seasons.
