Top Fencing Companies in Rancho Palos Verdes, CA, 90275 | Compare & Call
There are 222 fencing companies server in Rancho Palos Verdes CA
Estradas Iron Works has been serving Long Beach, CA, since 2006 as a family-owned metal fabrication and fencing company. We specialize in custom fences, gates, railings, and security doors, along with...
The Iron Man Welding in Long Beach, CA, has been shaping metal since 2000. What began as a custom iron furniture shop grew into a full-service welding and fabrication company for both homes and busine...
A G Solution is a Long Beach, CA based contractor specializing in fences, gates, demolition, and drywall services. We understand that your property needs to be both secure and well-maintained. From in...
For over 30 years, Making the Old New Again has served Long Beach homeowners with honest, cost-effective remodeling and repair services. As a general contractor specializing in flooring, fences, and g...
Figueroa Landscaping, based in Carson, CA, is a family-run business rooted in a tradition of hard work and dedication. Owner Alex Figueroa learned the trade from his father, spending summers mowing la...
Long Beach Welding, established in 2018, is a licensed and fully insured metal fabrication company serving Long Beach and all of Southern California. We specialize in MIG, stick, and flux welding, off...
CG IRONWORKS is a Torrance-based metal fabrication company owned and operated by Richard, an LA City Certified welder with nearly 20 years of experience. After honing his craft at a small shop in Gard...
No Limit Fence has served Huntington Beach and surrounding areas for over 35 years as a family-owned, licensed, insured, and bonded C13 fence contractor. Specializing in residential, commercial, and a...
Casa Grande Landscaping serves Compton, CA, specializing in landscaping, fences and gates, and artificial turf. We tackle common local issues like fence expansion damage from heat and soil shifts, plu...
LC Ornamental Supplies
LC Ornamental Supplies is a family-owned metal fabrication business founded by Lucio Catalan in 2006. Based in Compton, we specialize in custom and standard iron fences, gates, handrails, balconies, t...
Estimated Fencing Costs in Rancho Palos Verdes, CA
Questions and Answers
Why is a 12-inch deep concrete footing required for my fence posts in Silver Spur?
The Rancho Palos Verdes frost line depth is 12 inches. Footings must extend below this line to prevent frost heave, which lifts and cracks posts during winter ground freezing. IRC Section R403.1.4 mandates this for structural stability. Posts set in shallow concrete will fail within two seasons.
What are the height and setback rules for a fence on my property line in RPV?
RPV Municipal Code sets a 4-foot height limit for front yard fences and 6 feet for rear yards, measured from the exterior grade. A 0-foot setback is permitted, allowing installation directly on the property line. For corner lots near CA-1, a 10-foot 'sight triangle' with no visual obstructions above 3 feet is required for driver visibility.
How does the 110 MPH V-ult wind rating affect my fence design?
V-ult is the ultimate design wind speed per ASCE 7-22. A 110 MPH rating for RPV dictates maximum 8-foot panel spans, 4x4 posts set in concrete at 8-foot centers, and through-bolt connections—not screws. This engineering prevents failure during peak storm season gusts channeled from the Point Vicente bluffs.
What fencing materials are best for Rancho Palos Verdes's moderate termite risk and corrosive soil?
Moderate to heavy termite risk rules out untreated wood in ground contact. Use hot-dip galvanized steel posts or powder-coated aluminum for the framework. The moderate soil corrosivity index requires stainless steel (grade 304 or 316) fasteners to prevent rust streaks that stain stucco and hardscape.
How soon can a structural consultant assess my property?
A structural perimeter specialist can typically be dispatched within 48 hours. The standard route from the Point Vicente Interpretive Center uses CA-1 (Pacific Coast Highway) to Silver Spur, resulting in a 35-45 minute travel window for the initial site consultation and wind exposure assessment.
What are my legal obligations to a neighbor when replacing a shared fence in Rancho Palos Verdes?
California Civil Code 841 requires you to provide a written 'Notice of Intent' to the adjoining neighbor at least 30 days prior to work on a shared boundary fence. In 2026, this notice must include the proposed design, cost estimate, and a good-faith response period. Failure to comply invalidates any cost-sharing claims.
Can a smart gate system meet California's pool safety code?
Yes. A smart gate with an integrated, certified IoT latch can be programmed to self-close and self-latch automatically, meeting CA Health & Safety Code 115922. The exterior latch must be positioned at least 60 inches above grade. Modern systems log all access attempts, providing a digital record for liability protection.
What is required before digging fence post holes in the Silver Spur neighborhood?
State law requires a free utility locate via DigAlert (811) at least two working days before excavation. Striking an unmarked line in Silver Spur incurs major repair liabilities and fines. The RPV Permit Office concurrently requires a site plan showing the fence layout relative to all property lines for approval.
