Top Fencing Companies in Seal Beach, CA, 90720 | Compare & Call

There are 231 fencing companies server in Seal Beach CA

Superior Fence

Superior Fence

★★★★★ 4.6 / 5 (220)
Anaheim CA 92802
Fences & Gates, Patio Coverings

Superior Fence Inc., a family-owned business serving Anaheim since its founding, specializes in fence and gate installation along with patio coverings. Operating as a family-run operation since its fo...

Fence Guys

Fence Guys

★★★★☆ 4.2 / 5 (13)
3314 Kelburn Ave, Rosemead CA 91770
Fences & Gates

Fence Guys in Rosemead, CA is a licensed fencing contractor owned by Jerson. The company focuses on delivering an exceptional experience from start to finish, with customer satisfaction as the top pri...

Cali Fence

Cali Fence

★★★★☆ 4.4 / 5 (148)
6562 Caliente Rd Ste 101-190, Oak Hills CA 92344
Fences & Gates

Cali Fence, a licensed fencing company established in 2008, brings over 25 years of industry experience to Oak Hills and surrounding areas. Based in Riverside, we serve Orange County, the High Desert,...

Huntington Fence And Steel

Huntington Fence And Steel

★★★★★ 4.9 / 5 (76)
15102 Bolsa Chica St Ste G2, Huntington Beach CA 92649
Fences & Gates

Huntington Fence And Steel, based in Huntington Beach, CA, is a family-owned and operated fence and gate company with over a decade of experience serving Orange County. We specialize in the installati...

United Iron Works

United Iron Works

★★★★★ 4.6 / 5 (54)
13748 Desmont St, Pacoima CA 91331
Fences & Gates, Metal Fabricators, Decks & Railing

United Iron Works, established in 2008 in Pacoima, CA, is a metal fabrication company specializing in custom wood gates, wrought iron designs, spiral stairs, and metal handrails. We also offer guardra...

Joes Arc Welding

Joes Arc Welding

★★★★★ 5.0 / 5 (28)
El Monte CA 91734
Metal Fabricators, Fences & Gates

Joe's Arc Welding is a licensed welding service based in El Monte, CA, specializing in iron gates, security gates, and gate motors for both residential and commercial properties. As a small, owner-ope...

LA Decks

LA Decks

★★★★★ 5.0 / 5 (6)
1055 E Colorado Blvd Fl 5, Pasadena CA 91106
Decks & Railing, Siding, Fences & Gates

LA Decks, owned by Noa L., has been crafting custom outdoor living spaces since 1995. Based in Los Angeles and serving Orange County, we specialize in deck construction, design, and replacement using ...

Duran Custom Iron Gates

Duran Custom Iron Gates

★★★★★ 4.6 / 5 (48)
Perris CA 92570
Fences & Gates

Duran Custom Iron Gates is a family-owned metalwork business serving Perris, CA, and the surrounding area. We specialize in the fabrication and installation of custom iron gates, fencing, and related ...

BNJ Iron Works

BNJ Iron Works

★★★★★ 4.8 / 5 (27)
8206 Salt Lake Ave, Cudahy CA 90201
Fences & Gates, Masonry/Concrete, Metal Fabricators

BNJ Iron Works, Inc. has been a family-owned business serving Cudahy since 1974, offering expert fence and gate installation, repair, and weatherproofing. We specialize in masonry and concrete work—in...

Casa Valenzuela Construction

Casa Valenzuela Construction

★★★★★ 4.6 / 5 (254)
2953 Jensen St, Corona CA 92881
General Contractors, Fences & Gates

Casa Valenzuela Construction is a family-owned, minority-owned general contractor serving Corona and the surrounding areas in Riverside and Orange County. Since 2019, we have built a reputation throug...



Estimated Fencing Costs in Seal Beach, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Seal Beach. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

Why do fence footings in Seal Beach need to be engineered for frost?

The IRC requires footings to extend below the local frost line to prevent frost heave. Seal Beach has a 0-inch frost depth, meaning frost heave is not a structural driver. The primary engineering challenge here is the 110 MPH V-ult wind load. Posts must be sized and spaced per ASCE 7-22 standards to resist overturning forces from Pacific storms, not frost lift.

Can a smart gate system meet pool safety codes?

Yes. A smart gate with an integrated, self-closing and self-latching mechanism can be engineered to meet ASTM F1908-08, the standard referenced in California pool safety code. The IoT system provides audit trails for latch engagement, which strengthens liability defense. This integration of high-tech access and fundamental safety hardware is now a best practice.

How does the 110 MPH wind rating affect my fence design?

The V-ult wind speed of 110 MPH dictates the structural design. This rating requires closer post spacing, deeper concrete footings, and wind-rated brackets to transfer load to the ground. A standard 6-foot panel will fail in a peak storm season gust if not engineered for these uplift and shear forces specific to coastal exposure zones.

What are my legal obligations to neighbors when building a fence in Old Town?

California Civil Code 841 governs partition fences. You must provide written notice to any adjoining neighbor before altering or replacing a shared boundary fence. In 2026, this notice should include proposed materials, cost estimates, and a timeline. In Old Town's historic district, material restrictions add another compliance layer to this notification process.

What is required before digging fence post holes in Old Town?

State law requires a utility locate request through DigAlert 811 at least two working days before excavation. Hitting a gas, water, or fiber line in the dense Old Town neighborhood incurs major repair costs and liability. Our process includes submitting the DigAlert ticket and managing all associated permit paperwork with the Seal Beach Community Development Department concurrently.

What are the height and setback rules for a fence in Seal Beach?

Zoning limits are 3 feet in the front yard and 6 feet in the rear yard, with a 0-foot setback allowing construction directly on the property line. For corner lots, a 'sight triangle' regulation applies. No obstruction over 3 feet high is permitted within 10 feet of the property corner to maintain driver visibility, especially critical for homes near I-405 access routes.

What is your typical response time for a consultation in Seal Beach?

We dispatch from our central yard near the Seal Beach Pier. Travel to most Old Town properties via the I-405 and local arteries takes 35-45 minutes. We can typically schedule a site assessment and consultation within 48-72 hours of your initial inquiry, barring severe weather events that prioritize emergency repairs.

What fencing materials work best with Seal Beach's soil and pest conditions?

Material compatibility is critical due to high soil corrosivity and moderate termite risk. Pressure-treated wood must be rated for ground contact and use stainless steel or hot-dipped galvanized fasteners to prevent rust streaks. In Old Town, material choices are further restricted by historic district guidelines, often favoring cedar or composite over vinyl or metal.



Scroll to Top
CALL US NOW