Top Fencing Companies in Selma, CA, 93662 | Compare & Call

Selma zoning enforces a 3-foot height limit in front yards and 6 feet in rear yards. The city allows a 0-foot setback, meaning fences can be built directly on the property line. For corner lots, especially those near CA-99, a clear 'sight triangle' must be maintained for driver visibility. We survey this during the consultation to ensure compliance.

The first step is calling USA North 811 for a utility locate, a free service that marks underground lines. Hitting a gas or fiber line in Downtown Selma incurs major liability and repair costs. Concurrently, we manage the permit paperwork with the Selma permit office, which typically requires a site plan and specification sheet for approval.

Posts in Downtown Selma require a 12-inch footing depth to meet IRC standards for frost protection. Footings above the frost line are subject to heave, which destabilizes the entire structure. For a 6-foot fence, we typically set posts 24 inches deep, providing a 2:1 embedment ratio for stability against the 105 MPH V-ult wind load.

Yes. California Civil Code 841, the 'Good Neighbor Fence Act,' requires written notice to adjoining owners before replacing a shared boundary fence. As of 2026, this notice must be provided at least 30 days prior to work commencing. For fences entirely on your property, a courtesy notice is still recommended for neighborhood diplomacy.

We typically dispatch for a site consultation within 48 hours. Our route from Pioneer Village to Downtown Selma uses CA-99, ensuring a consistent 15-20 minute response time. The consultation includes a zoning review, wind load assessment, and a detailed quote based on the current $45/hr average labor rate.

All our designs are engineered for Selma's 105 MPH V-ult wind speed rating per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For the peak storm season, we calculate the wind load on solid-panel fences to ensure the structure can survive gust events without overturning or panel failure.

Downtown Selma's moderate soil corrosivity index and termite risk dictate material selection. We specify hot-dip galvanized steel posts and fasteners to prevent rust streaks. For wood components, pressure-treated lumber rated for ground contact is mandatory. Aluminum or vinyl are suitable above-ground alternatives that resist both corrosion and insect damage.

Yes. Modern IoT gate latches can be integrated to meet both security and safety codes. The system must comply with ASTM F1908-16 and CA Health and Safety Code 115922 for pool barriers, ensuring self-closing, self-latching operation. We design the integration so the smart lock's fail-safe mode defaults to a latched position, maintaining liability protection.