Top Fencing Companies in Silver Lakes, CA, 92342 | Compare & Call
There are 72 fencing companies server in Silver Lakes CA
Unique Ornamental Iron, founded in 1990 by Rodney, is a family-owned metal fabrication and fencing company based in Homeland, CA. Rodney learned welding and fabrication at a young age from his father,...
SM Ironwerx, located in Homeland, CA, provides expert metal fabrication and fencing services to local homeowners. Specializing in both fence and gate installation, repair, painting, staining, and weat...
With over 10 years in the industry, B Child Safe in Santa Clarita, CA, is the third generation of a family business that has been installing premium pool safety products for more than two decades. We ...
R&S Overhead Doors of Inland Empire
R&S Overhead Doors of Inland Empire, headquartered in Ontario, CA, has been a trusted provider of commercial and industrial door solutions since 2006. Founded by Joe Cutter, who brings over 23 years o...
Ellis Fence Company, established by Wayne Ellis in 2004, is a family-owned and locally operated fencing contractor serving Barstow, CA, and the surrounding Hi-Desert area. We are licensed, bonded, and...
Priority Doors & Gates
Priority Doors & Gates serves Hesperia, CA, and the surrounding High Desert region with expert installation and maintenance for residential and commercial properties. As a licensed garage door service...
Marriott Fence Construction Inc., founded in 2013 by President Dolores Marriott, is a woman-owned small business serving Hesperia and the High Desert. With over 35 years of combined experience in the ...
Felix Metal Works has served Norco and the surrounding areas for over 30 years as a licensed metal fabrication company specializing in wrought iron fences, gates, railings, and concrete steps. Our tea...
Tony Garage Door & Gate has served Barstow and the High Desert for over 20 years, specializing in roll-up gates, overhead doors, and custom iron fencing. Whether near the historic Harvey House or alon...
Andy's Handy in Lancaster, CA, is a general contracting company that handles a wide range of home improvement projects. From bathroom and kitchen remodels to deck construction and new room additions, ...
Estimated Fencing Costs in Silver Lakes, CA
Question Answers
What fencing materials work best for Silver Lakes conditions?
Material compatibility is critical. The moderate termite risk advises against untreated wood in ground contact. The moderate soil corrosivity index requires G90 galvanized steel fasteners for all metal posts and brackets; lower-grade hardware will rust and streak within a year.
How is a fence engineered for high winds here?
The 105 MPH V-ult wind speed rating dictates the structural design. This engineering standard (ASCE 7-22) requires closer post spacing, deeper concrete footings, and commercial-grade wind-rated brackets to resist uplift forces from peak storm season gusts off the I-15 corridor.
What is the typical timeline for a consultation and project start?
We dispatch from the Silver Lakes Association Clubhouse. The route via I-15 allows for a 45-60 minute response time for most consultations in the community. Following the site assessment and permit acquisition, project mobilization typically occurs within 10-14 business days.
Why do footing posts need to be set so deep in Silver Lakes?
The 12-inch frost line depth in Silver Lakes North requires footings to extend below it. Frost heave from wet soil will lift and crack shallow posts. IRC Section R403.1.4 mandates this for stability. Posts not set below the frost line will fail within two seasons.
How do modern gate systems meet safety and security needs?
Integrated smart gate systems with IoT-controlled latches address both trends. These systems can be programmed for automatic closure, directly meeting the ASTM F1908-16 and California SB 442 standards for pool barrier compliance, which is a critical liability shield for California homeowners.
What is required before digging fence post holes?
You must contact DigAlert (811) for a utility locate at least two working days before excavation. Hitting a gas or fiber line in Silver Lakes North incurs major repair costs and liability. We manage the associated city permit paperwork from the Silver Lakes permit office concurrently.
What are the height and placement rules for a fence in Silver Lakes?
Zoning limits are 3 feet in the front yard and 6 feet in the rear. The 0-foot setback allows building on the line with an encroachment permit. For corner lots near I-15, a sight triangle must be maintained for driver visibility; no solid fencing is permitted in that zone.
What are the legal rules for a fence on a shared property line?
California Civil Code 841, the 'Good Neighbor' law, governs shared boundaries. As of 2026, you must provide a 30-day written notice to the adjoining owner in Silver Lakes before replacing a partition fence. This notice must include material specifications and a cost estimate.
