Top Fencing Companies in Sonoma, CA, 95476 | Compare & Call

There are 240 fencing companies server in Sonoma CA

Robledo Iron Works

Robledo Iron Works

★☆☆☆☆ 1.0 / 5 (1)
2200 Cuttings Wharf Rd, Napa CA 94559
Metal Fabricators, Powder Coating, Fences & Gates

Robledo Iron Works, established in 2014 by Jose Robledo and his family, has grown from a small garage operation into a trusted metal fabrication company serving Napa and the greater Bay Area. Speciali...

Yzzo Studios

Yzzo Studios

★★★★★ 5.0 / 5 (4)
1 W Barrett Ave, Richmond CA 94801
Fences & Gates, Metal Fabricators, Commissioned Artists

Yzzo Studios, founded by metal artist Wesley Skinner in 2011, is a full-service metal fabrication studio based at American Steel Studios in West Oakland, serving the entire East Bay including Richmond...

Brian’s Home Care Solutions

Brian’s Home Care Solutions

Rodeo CA 94572
Plumbing, Generator Installation/Repair, Fences & Gates

Brian’s Home Care Solutions, run by Brian and his wife Dulce, provides reliable plumbing, electrical, generator, and fence services to Rodeo homeowners. With years of hands-on construction experience,...

Mario's Construction

Mario's Construction

Napa CA 94559
Metal Fabricators, General Contractors, Fences & Gates

Mario's Construction, based in Napa, CA, specializes in metal fabrication, general contracting, and fence and gate services. Many local homes face fence expansion damage and gate lock failures due to ...

T Ko Iron Works

T Ko Iron Works

5353 Broadway St, American Canyon CA 94503
Fences & Gates, Metal Fabricators

T Ko Iron Works, based in American Canyon, CA, specializes in fence and gate services for local homes and businesses. The company addresses common issues like wood fence warping from heat and sagging ...

Fierro Iron Works

Fierro Iron Works

★★★★☆ 4.1 / 5 (14)
South San Francisco CA 94080
Fences & Gates, Metal Fabricators

Fierro Iron Works, based in South San Francisco, has been a trusted metal fabricator for over 40 years, specializing in security gates, handrails, railings, iron fencing, and custom metalwork. As a qu...

Hilltop Builders

Hilltop Builders

★★★★★ 5.0 / 5 (3)
1900 Powell St, Emeryville CA 94608
General Contractors, Fences & Gates, Decks & Railing

Hilltop Builders is a family-owned construction company based in Emeryville, CA, with over 20 years of experience serving residential and commercial clients. We specialize in a wide range of services,...

Arts Built

Arts Built

Richmond CA 94804
Fences & Gates, Metal Fabricators, Carpenters

Arts Built is a Richmond, CA studio where fine artistry meets functional craftsmanship. As a professional fine artist and master sculptor, I bring a unique visual acuity to every project, transforming...

Marroquin’s General Construction

Marroquin’s General Construction

★★★★★ 5.0 / 5 (1)
Fairfield CA 94533
General Contractors, Roofing, Fences & Gates

Marroquin’s General Construction is a family-owned and operated licensed general contractor serving Fairfield, CA, with 30 years of industry experience. We specialize in bathroom remodeling, kitchen r...

Pena iron work

Pena iron work

★★★★★ 5.0 / 5 (3)
Vacaville CA 95687
Metal Fabricators, Fences & Gates, Decks & Railing

Pena Iron Work serves Vacaville, CA, specializing in metal fabrication, fencing, gates, and deck services. Located near the Vacaville Premium Outlets and within reach of neighborhoods like North Villa...



Estimated Fencing Costs in Sonoma, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,299 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Sonoma. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What fencing materials are suitable for Sonoma's moderate soil corrosivity and termite risk?

Given the moderate to heavy termite risk and moderate soil corrosivity, pressure-treated wood or naturally termite-resistant species like redwood are primary choices. For metal components, use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. Avoid untreated wood and standard steel in direct ground contact.

How soon can a specialist visit my property for a consultation?

A structural perimeter specialist can typically be dispatched within 48 hours. The standard route from the Sonoma Plaza uses CA-12 for efficient access across the valley, resulting in a 15-25 minute travel time for most consultations in the Downtown Sonoma area.

Why must fence posts in Downtown Sonoma be set below the 12-inch frost line?

Soil in Downtown Sonoma freezes to a frost line depth of 12 inches. Posts set above this line will experience frost heave, which destabilizes the entire structure. IRC Section R403.1.4 requires footings to extend below the frost line to prevent this differential movement and structural failure.

How does the 105 MPH V-ult wind speed rating affect my fence design?

The 105 MPH ultimate design wind speed (V-ult) for Sonoma, per ASCE 7-22 standards, dictates structural requirements. This rating necessitates closer post spacing (often 6 feet on-center or less), deeper concrete footings, and the use of wind-rated brackets to resist peak storm season gusts without failing at connections.

Does a smart gate meet California's pool safety requirements?

Yes, when properly integrated. A smart gate with an IoT-controlled motorized latch can be configured to meet ASTM F1908-16 and the 2022 California Building Code Annex A standards for self-closing, self-latching mechanisms. This integration provides both modern access control and critical liability protection for pool owners.

What is the utility locate process before digging fence post holes?

You must contact 811 (USA North) at least two business days before excavation. They will dispatch utilities to mark underground lines. Hitting an unmarked line in Downtown Sonoma constitutes major liability for repair costs and service disruption. We manage the subsequent City of Sonoma permit office paperwork, which requires these locates.

What are the height and setback rules for a fence on my property in Sonoma?

Sonoma zoning typically limits front yard fences to 3 feet and rear/side yard fences to 6 feet. A 0-foot (on-line) setback is generally permitted. For corner lots, especially those near CA-12, you must maintain a 'sight triangle'—a clear visibility zone at the intersection—which overrides standard height limits for safety.

What is my legal obligation to notify a neighbor before replacing a shared fence in Sonoma?

California Civil Code 841, the 'Good Neighbor Fence Law,' requires written notice to adjoining owners at least 30 days before starting work on a shared boundary fence. In 2026, this notice must include a preliminary cost estimate and a brief description of the proposed work. Failure to provide notice can negate cost-sharing rights.



Scroll to Top
CALL US NOW