Top Fencing Companies in South Pasadena, CA, 91030 | Compare & Call

There are 236 fencing companies server in South Pasadena CA

T.J. Julka Construction

T.J. Julka Construction

★★★★★ 5.0 / 5 (6)
San Fernando Valley CA 91601
Fences & Gates, Patio Coverings, Decks & Railing

T.J. Julka Construction, licensed under California license #1104821, is a San Fernando Valley-based architectural wood structure company specializing in custom fences, gates, decks, railings, pergolas...

GnG Vinyl Fencing

GnG Vinyl Fencing

★★★★★ 4.7 / 5 (441)
445 W Colorado St, Glendale CA 91204
Fences & Gates, Patio Coverings

GnG Vinyl Fencing in Glendale, CA is a licensed vinyl fencing company that fabricates and installs durable, high-quality vinyl products. Operating from a 15,000 square foot facility in Los Angeles, th...

A-List Garage Door & Gate

A-List Garage Door & Gate

★★★★★ 5.0 / 5 (35)
14815 Bessemer St, Van nuys CA 91411
Fences & Gates, Garage Door Services

A-List Garage Door & Gate is a family-owned business serving Van Nuys and the surrounding San Fernando Valley for over two decades. Founded by Eli, our team specializes in the repair, installation, an...

EZ Gates Service

EZ Gates Service

★★★★★ 4.8 / 5 (47)
Santa Clarita CA
Fences & Gates, Garage Door Services

EZ Gates Service, a licensed gate service company, has been serving Santa Clarita, the San Fernando Valley, and nearby areas since 2005. Under my management since 2005, we carry on my father’s legacy ...

Land Eco Development

Land Eco Development

★★★★★ 5.0 / 5 (1)
Los Angeles CA 91609
General Contractors, Landscaping, Fences & Gates

Land Eco Development serves Los Angeles, CA as a full-service general contractor, landscaper, and fencing expert. They handle everything from bathroom remodeling and deck construction to complete land...

Forgeways

Forgeways

★★★★★ 4.7 / 5 (46)
1911 N San Fernando Rd, Los Angeles CA 90065
Metal Fabricators, Fences & Gates

FORGEWAYS, a Los Angeles metal fabrication company with roots dating back to Robertos Wrought Iron, rebranded to continue a family tradition of craftsmanship. Founded in 2018, we specialize in custom ...

MB Fence & Iron Works

MB Fence & Iron Works

★★★★★ 4.7 / 5 (42)
834 Hyde Ave, Pomona CA 91767
Fences & Gates

MB Fence & Iron Works is a family-owned business serving Pomona and the surrounding area since 1980. The current owner grew up in the trade, taking over from his father after decades of hands-on exper...

LA Iron & Design

LA Iron & Design

Burbank CA 91506
Fences & Gates, Metal Fabricators

LA Iron & Design is a licensed C-23 metal fabrication contractor serving Burbank and the greater Los Angeles area. Based in Burbank, the company specializes in custom fences, gates, railings, balconie...

Buena Vista Fence

Buena Vista Fence

★★★★★ 4.6 / 5 (10)
San Fernando CA 91340
Fences & Gates

Buena Vista Fence is a veteran-owned fencing company based in San Fernando, serving Los Angeles and Ventura County. Founded on values of listening, trust, and integrity, we treat every project with th...

Next Level Garage Doors & Gates

Next Level Garage Doors & Gates

★★★★★ 5.0 / 5 (53)
Los Angeles CA 91340
Fences & Gates, Garage Door Services

Next Level Garage Doors & Gates serves Los Angeles homeowners with expert fence, gate, and garage door services. Based in the heart of the city, we are just minutes from landmarks like the Griffith Ob...



Estimated Fencing Costs in South Pasadena, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for South Pasadena. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and setback rules for fences in South Pasadena?

Zoning limits are 4 feet in the front yard and 6 feet in the rear. The 4-foot limit applies within the front yard setback, which is typically 20 feet from the property line. On corner lots, a 10-foot 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet high. This is critical for visibility near major arteries like CA-110. In historic districts, any fence visible from the street requires design review approval.

How does the 105 MPH wind rating affect my fence design?

The 105 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This engineering requirement dictates post spacing, concrete footing mass, and bracket strength. For a solid-panel fence, post spacing must not exceed 8 feet on center. Use through-bolt connections, not just lag screws. This design resists the peak storm season gusts that funnel through the Arroyo Seco and near CA-110, preventing overturning failure.

What are my legal duties to my neighbor when building a fence in South Pasadena?

California Civil Code Section 841 requires written notice to adjoining owners at least 30 days before replacing a shared boundary fence. As of 2026, this notice must include a Good Neighbor Fence Act disclosure and proposed cost estimates. For a new partition fence on the property line, you are jointly responsible for a 'sufficient' fence. Failure to provide proper notice can result in liability for the full cost.

Do smart gates and IoT locks meet California pool safety codes?

Yes, when integrated correctly. California Building Code Chapter 31B and ASTM F1908-16 require pool barriers to be at least 5 feet high with self-closing, self-latching gates. A smart gate system must have a primary mechanical latch that automatically engages and a secondary IoT lock. The system must send an alert if the gate is propped open. This dual-layer compliance is now the standard for managing liability in 2026.

What fencing materials work best in South Pasadena's soil and climate?

Material compatibility is critical. The soil has a moderate corrosivity index, requiring G90 galvanized or powder-coated steel hardware to prevent rust streaks. With a 'Very Heavy' termite risk, avoid wood posts in direct ground contact. Use concrete-filled steel posts or pressure-treated lumber rated for ground contact. Composite or aluminum panels are low-maintenance alternatives that resist both corrosion and insect damage.

What is your typical response time for a consultation in South Pasadena?

Our standard consultation dispatch is 25-40 minutes from notification. For the Oaklawn area, our route originates from the South Pasadena Public Library landmark, proceeding via CA-110 to minimize transit time. We schedule site assessments within a 48-hour window to evaluate footing conditions, wind exposure, and zoning constraints before providing a firm engineering and installation plan.

Why do concrete footings for fence posts fail in South Pasadena?

Post footings must extend below the 12-inch frost line to prevent frost heave. In the Oaklawn neighborhood, soil saturation from winter rains can freeze, causing un-anchored posts to lift and fail. IRC Section R403.1.4 requires footings to be a minimum of 12 inches below undisturbed earth. A 24-inch deep, 8-inch diameter concrete footing is the standard for a 6-foot fence to resist both frost and the 105 MPH V-ult wind load.

What is the utility locate and permitting process in South Pasadena?

State law requires a DigAlert (811) ticket at least two working days before excavation. In Oaklawn, hitting a gas, water, or fiber optic line is a major liability that can incur thousands in repair costs and fines. The City's Permit Office requires a site plan, material specs, and, for historic districts, a separate design review application. We manage this paperwork to ensure your project starts without delay or violation.



Scroll to Top
CALL US NOW