Top Fencing Companies in South Pasadena, CA, 91030 | Compare & Call

There are 236 fencing companies server in South Pasadena CA

1 800 Pro Fence

1 800 Pro Fence

★★★★★ 4.6 / 5 (30)
Monrovia CA 91017
Fences & Gates

1 800 Pro Fence, originally founded as David Proctor Fencing in October 1988 by David Proctor, has been serving Monrovia and the surrounding San Gabriel Valley for over three decades. Starting as a so...

Emerick's Ironworks

Emerick's Ironworks

★★★★★ 4.8 / 5 (61)
Buena Park CA 90620
Metal Fabricators, Fences & Gates

Emerick’s Ironworks is a father-and-son metal fabrication business based in Buena Park, CA, serving all of Southern California since 1999. We specialize in custom wrought iron gates, fences, stairways...

Aguila Fence Solutions

Aguila Fence Solutions

★★★★★ 4.7 / 5 (13)
Montebello CA 90640
Fences & Gates

Aguila Fence Solutions, a family-owned fencing company based in Montebello, CA, brings over 30 years of hands-on experience to every project. We started as independent craftsmen after working for larg...

Barragan Ironworks

Barragan Ironworks

★★★★★ 5.0 / 5 (32)
Baldwin Park CA 91706
Fences & Gates

Barragan Ironworks is a licensed, bonded, and insured fabrication and repair service based in Baldwin Park, CA, serving all of Southern California. With C-13 and C-23 licenses (#1078118), the company ...

Marquez Iron Work

Marquez Iron Work

★★★★☆ 4.2 / 5 (20)
1656 Bon View Ave Ste C, Ontario CA 91761
Fences & Gates, Decks & Railing

Marquez Iron Work, a family-owned business established in 2001, specializes in designing, crafting, and installing iron fences, gates, railings, window bars, and entry doors for residential, commercia...

Madrid fence

Madrid fence

★★★★☆ 4.0 / 5 (49)
Riverside CA 92507
Fences & Gates

Madrid fence in Riverside, CA is a family-owned metal fabrication business that started when the owner began helping his father on weekends. After graduating high school, he joined the business full-t...

JL Custom Iron Works

JL Custom Iron Works

★★★★☆ 4.2 / 5 (5)
Corona CA 92880
Fences & Gates, Metal Fabricators

JL Custom Iron Works, founded and operated by Jorge, brings 25 years of metal fabrication and welding expertise to Corona, CA. Starting as a father and now a single father, Jorge leads a dedicated thr...

Dock USA

Dock USA

★★★★★ 5.0 / 5 (1)
1701 Rimpau Ave Ste 106, Corona CA 92881
Fences & Gates, Door Sales/Installation

Dock USA, based in Corona, CA, has been a trusted licensed and insured provider of commercial dock and door solutions since 2010. Serving Southern California from San Diego County to Kern County, we s...

LANGO Welding

LANGO Welding

★★★★★ 4.8 / 5 (42)
South El Monte CA 91733
Metal Fabricators, Fences & Gates

LANGO Welding, a family-owned and operated business based in South El Monte, CA, brings over 15 years of hands-on experience to the metal fabrication and fencing industry. We specialize in creating an...

Apexguard Fencing

Apexguard Fencing

★★★★☆ 4.2 / 5 (5)
Fontana CA 92336
Fences & Gates

Apexguard Fencing provides fencing and gate solutions to homeowners and businesses in Fontana, CA. We install a range of materials, including wrought iron and vinyl, focusing on durability and securit...



Estimated Fencing Costs in South Pasadena, CA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $484
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,729

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for South Pasadena. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and setback rules for fences in South Pasadena?

Zoning limits are 4 feet in the front yard and 6 feet in the rear. The 4-foot limit applies within the front yard setback, which is typically 20 feet from the property line. On corner lots, a 10-foot 'sight triangle' from the property corner must remain clear of any obstruction over 3 feet high. This is critical for visibility near major arteries like CA-110. In historic districts, any fence visible from the street requires design review approval.

How does the 105 MPH wind rating affect my fence design?

The 105 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This engineering requirement dictates post spacing, concrete footing mass, and bracket strength. For a solid-panel fence, post spacing must not exceed 8 feet on center. Use through-bolt connections, not just lag screws. This design resists the peak storm season gusts that funnel through the Arroyo Seco and near CA-110, preventing overturning failure.

What are my legal duties to my neighbor when building a fence in South Pasadena?

California Civil Code Section 841 requires written notice to adjoining owners at least 30 days before replacing a shared boundary fence. As of 2026, this notice must include a Good Neighbor Fence Act disclosure and proposed cost estimates. For a new partition fence on the property line, you are jointly responsible for a 'sufficient' fence. Failure to provide proper notice can result in liability for the full cost.

Do smart gates and IoT locks meet California pool safety codes?

Yes, when integrated correctly. California Building Code Chapter 31B and ASTM F1908-16 require pool barriers to be at least 5 feet high with self-closing, self-latching gates. A smart gate system must have a primary mechanical latch that automatically engages and a secondary IoT lock. The system must send an alert if the gate is propped open. This dual-layer compliance is now the standard for managing liability in 2026.

What fencing materials work best in South Pasadena's soil and climate?

Material compatibility is critical. The soil has a moderate corrosivity index, requiring G90 galvanized or powder-coated steel hardware to prevent rust streaks. With a 'Very Heavy' termite risk, avoid wood posts in direct ground contact. Use concrete-filled steel posts or pressure-treated lumber rated for ground contact. Composite or aluminum panels are low-maintenance alternatives that resist both corrosion and insect damage.

What is your typical response time for a consultation in South Pasadena?

Our standard consultation dispatch is 25-40 minutes from notification. For the Oaklawn area, our route originates from the South Pasadena Public Library landmark, proceeding via CA-110 to minimize transit time. We schedule site assessments within a 48-hour window to evaluate footing conditions, wind exposure, and zoning constraints before providing a firm engineering and installation plan.

Why do concrete footings for fence posts fail in South Pasadena?

Post footings must extend below the 12-inch frost line to prevent frost heave. In the Oaklawn neighborhood, soil saturation from winter rains can freeze, causing un-anchored posts to lift and fail. IRC Section R403.1.4 requires footings to be a minimum of 12 inches below undisturbed earth. A 24-inch deep, 8-inch diameter concrete footing is the standard for a 6-foot fence to resist both frost and the 105 MPH V-ult wind load.

What is the utility locate and permitting process in South Pasadena?

State law requires a DigAlert (811) ticket at least two working days before excavation. In Oaklawn, hitting a gas, water, or fiber optic line is a major liability that can incur thousands in repair costs and fines. The City's Permit Office requires a site plan, material specs, and, for historic districts, a separate design review application. We manage this paperwork to ensure your project starts without delay or violation.



Scroll to Top
CALL US NOW