Top Fencing Companies in Yucca Valley, CA, 92252 | Compare & Call

There are 109 fencing companies server in Yucca Valley CA

Bradford Fence Co

Bradford Fence Co

★★★★★ 5.0 / 5 (70)
Riverside CA 92501
Fences & Gates

Bradford Fence Co is a licensed fencing contractor serving homeowners in Riverside, CA, and surrounding areas. We specialize in the installation, repair, and maintenance of vinyl, wood, chain link, an...

Golden State Door

Golden State Door

★★★★★ 4.8 / 5 (135)
San Bernardino CA 92408
Garage Door Services, Fences & Gates

At Golden State Door, we serve residential and commercial clients in San Bernardino and within a 50-mile radius of Riverside. Our licensed technicians specialize in repairing and replacing automatic a...

JV Custom Ornamentals

JV Custom Ornamentals

★☆☆☆☆ 1.0 / 5 (4)
1347 N Santiago St, Santa Ana CA 92701
Fences & Gates, Decks & Railing

JV Custom Ornamentals is a Santa Ana-based family business specializing in custom ironwork, fences, gates, decks, and railings. Founded by Juan Vasquez, a second-generation welder who personally desig...

Rogers Welding and Fabrication

Rogers Welding and Fabrication

★★★★★ 4.9 / 5 (25)
Riverside CA 92507
Metal Fabricators, Fences & Gates

Rogers Welding and Fabrication, owned by David Rogers, is a family-run mobile welding company serving Riverside and surrounding areas. Licensed and certified (CA License #775242, LA City Dept of Build...

G Fence

G Fence

★★★★★ 5.0 / 5 (1)
5867 Gage St, Riverside CA 92504
Metal Fabricators, Fences & Gates, Decks & Railing

G Fence has been serving Riverside, CA, as a trusted metal fabricator and fence contractor. Located near the historic Mission Inn and the Riverside Plaza, we specialize in fencing, gates, decks, and r...

Alfaro Fencing

Alfaro Fencing

★★★★★ 5.0 / 5 (2)
Riverside CA 92504
Fences & Gates

Alfaro Fencing brings 25 years of hands-on experience to Riverside, CA, specializing in fence and gate installation, repair, and custom design. Founded by Felipe Alfaro, the company serves residential...

United Ornamental Supply

United Ornamental Supply

★★☆☆☆ 2.0 / 5 (1)
6161 Quail Valley Ct, Riverside CA 92507
Hardware Stores, Fences & Gates, Metal Fabricators

Since 2023, United Ornamental Supply in Riverside, CA has been the single source for carbon, hot roll, ornamental products, and structural needs. We combine a wide inventory of metal fabrication mater...

BBB Fabrication

BBB Fabrication

★★★★★ 4.8 / 5 (48)
Rialto CA 92376
Fences & Gates, Metal Fabricators

BBB Fabrication is a metal fabrication business serving homeowners in Rialto, CA, and surrounding areas. We focus on custom gates, fences, handrails, and home decor, using TIG and MIG welding on steel...

Ultimate Fence Industries

Ultimate Fence Industries

7951 Arlington Ave, Riverside CA 92503
Fences & Gates

Ultimate Fence Industries, based in Riverside, CA, has been providing durable fencing solutions for residential and commercial properties across Riverside, San Bernardino, and Orange counties for deca...

Simpson Fence

Simpson Fence

★★★★★ 5.0 / 5 (1)
Riverside CA 92506
Fences & Gates

Simpson Fence has been serving Riverside, CA, for years, providing expert fence and gate solutions. Riverside homes face unique challenges like UV damage to vinyl fencing, which causes fading and brit...



Estimated Fencing Costs in Yucca Valley, CA

Emergency Fence/Gate RepairStorm / Security Response
$344 - $469
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,244 - $1,664

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Yucca Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What are my legal duties to my neighbor when building a fence?

California Civil Code 841 (the 'Good Neighbor Fence Act') governs. For a shared boundary, you must provide a 30-day written notice with your proposal before construction. Since 2026, this notice must include a standardized disclosure form outlining cost-sharing options. Failure to comply can result in liability for the full cost and removal.

How do you build a fence to survive 100+ MPH winds?

Engineering for the 105 MPH V-ult wind speed dictates the design. Standard 8-foot post spacing often fails. We use 6-foot centers with concrete footings, through-bolt tension brackets, and wind-rated pickets. This system is engineered to resist the peak storm season gusts that funnel through the Yucca Mesa area without creating a projectile hazard.

How soon can you start a project in Yucca Mesa?

Consultations are typically scheduled within 48 hours. Our route from the Yucca Valley Community Center via CA-62 to Yucca Mesa takes 15-20 minutes. We conduct a site survey to verify property lines, wind exposure, and utility locations, providing a firm quote and projected start date based on current material lead times and the $45/hr average labor rate.

Is a 12-inch footing deep enough for my Yucca Valley fence posts?

Yes, for frost. The IRC mandates footings below the local frost line, which is 12 inches in Yucca Valley. In Yucca Mesa, posts set shallower will heave from freeze-thaw cycles, causing structural failure. For the 105 MPH V-ult wind load, footings often need greater depth and diameter for overturning resistance, per ASCE 7-22 standards.

What is required before you dig the first post hole?

You must call 811 (DigAlert) at least two business days before digging. Hitting an unmarked gas, water, or fiber line in Yucca Mesa is a major financial and safety liability. We manage the permit paperwork with the Yucca Valley Building Department, ensuring the plot plan and engineering details comply before any equipment arrives.

What are the height and placement rules for a fence in Yucca Valley?

Zoning is strict. The front yard height limit is 3.5 feet; rear and side yards allow 6 feet. Setback is 0 feet, meaning you can build directly on the property line. For corner lots near CA-62, you must maintain a clear 'sight triangle' at intersections. A 6-foot fence in the front yard or one blocking driver sightlines will be red-tagged.

Can I have a smart gate with a pool?

Yes, but integration is key. The gate hardware and IoT latch system must comply with ASTM F2286-05 and IBC 3109 pool barrier codes for self-closing and self-latching. A modern system logs access and sends tamper alerts, which strengthens liability defense. We spec integrated smart latches that meet both security trends and California's stringent safety code.

What fence materials work best in Yucca Valley's soil?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel posts and fasteners. Aluminum or stainless hardware is better. Pressure-treated wood is standard, but the moderate termite risk in Yucca Mesa makes concrete, steel, or composite posts a more durable long-term choice. Inferior fasteners cause rust streaks on stucco within two seasons.



Scroll to Top
CALL US NOW