Top Fencing Companies in Yucca Valley, CA, 92252 | Compare & Call

There are 109 fencing companies server in Yucca Valley CA

SM Ironwerx

SM Ironwerx

Homeland CA 92548
Metal Fabricators, Fences & Gates

SM Ironwerx, located in Homeland, CA, provides expert metal fabrication and fencing services to local homeowners. Specializing in both fence and gate installation, repair, painting, staining, and weat...

R&S Overhead Doors of Inland Empire

R&S Overhead Doors of Inland Empire

★★★★★ 5.0 / 5 (4)
1939 S Augusta Ct, Ontario CA 91761
Garage Door Services, Fences & Gates, Door Sales/Installation

R&S Overhead Doors of Inland Empire, headquartered in Ontario, CA, has been a trusted provider of commercial and industrial door solutions since 2006. Founded by Joe Cutter, who brings over 23 years o...

Ray Neff Metal Fabrication

Ray Neff Metal Fabrication

★★★★☆ 4.0 / 5 (8)
Oceaniside CA 92056
Metal Fabricators, Fences & Gates, Decks & Railing

Ray Neff Metal Fabrication is a third-generation custom welding and fabrication company based in Oceanside, CA. Licensed and insured (Ca. Lic # C23-968669), we specialize in creating and repairing gat...

R Solution Termite & Construction

R Solution Termite & Construction

★★★☆☆ 3.3 / 5 (21)
1304 N Melrose Dr Ste H, Vista CA 92083
Pest Control, Fences & Gates, Windows Installation

R Solution Termite & Construction is a family-owned, veteran-operated business serving Vista and all of San Diego County since 2002. Founded on principles of honesty, transparency, and quality, we spe...

Bear Welding

Bear Welding

Murrieta CA 92562
Metal Fabricators, Fences & Gates, General Contractors

Bear Welding has been serving Murrieta, CA, and the surrounding area with reliable fence and gate services. Local homes often face fence damage from earthquakes and rusting metal components due to the...

Felix Metal Works

Felix Metal Works

★★★☆☆ 3.4 / 5 (5)
Norco CA 92860
Fences & Gates, Masonry/Concrete, Decks & Railing

Felix Metal Works has served Norco and the surrounding areas for over 30 years as a licensed metal fabrication company specializing in wrought iron fences, gates, railings, and concrete steps. Our tea...

Mark's Welding

Mark's Welding

★★★☆☆ 3.3 / 5 (12)
La Quinta CA 92253
Metal Fabricators, Fences & Gates, Painters

Mark's Welding in La Quinta, CA, is a family-owned business that takes pride in transforming everyday metalwork into something special. Founded by Mark and his wife, the company specializes in custom ...

Low Cost Maintenance

Low Cost Maintenance

Hesperia CA 92344
Lawn Services, Fences & Gates, Junk Removal & Hauling

Low Cost Maintenance, owned by Jose Lopez, brings over 30 years of hands-on experience to Hesperia, CA. Jose started his career in Santa Barbara, then worked in Lompoc before settling in the High Dese...

Design Welders

Design Welders

Phelan CA 92371
Door Sales/Installation, Fences & Gates

Design Welders in Phelan, CA, established in April 2024, brings over 24 years of combined experience in transforming metal into functional art. Our skilled ironworkers specialize in door sales and ins...

Gatefx

Gatefx

Phelan CA 92371
Fences & Gates

Gatefx, owned by George DuBois in Phelan, CA, specializes in the installation, service, and repair of electric and solar automatic gate operators. With over 25 years of experience, George entered the ...



Estimated Fencing Costs in Yucca Valley, CA

Emergency Fence/Gate RepairStorm / Security Response
$344 - $469
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,244 - $1,664

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Yucca Valley. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What are my legal duties to my neighbor when building a fence?

California Civil Code 841 (the 'Good Neighbor Fence Act') governs. For a shared boundary, you must provide a 30-day written notice with your proposal before construction. Since 2026, this notice must include a standardized disclosure form outlining cost-sharing options. Failure to comply can result in liability for the full cost and removal.

How do you build a fence to survive 100+ MPH winds?

Engineering for the 105 MPH V-ult wind speed dictates the design. Standard 8-foot post spacing often fails. We use 6-foot centers with concrete footings, through-bolt tension brackets, and wind-rated pickets. This system is engineered to resist the peak storm season gusts that funnel through the Yucca Mesa area without creating a projectile hazard.

How soon can you start a project in Yucca Mesa?

Consultations are typically scheduled within 48 hours. Our route from the Yucca Valley Community Center via CA-62 to Yucca Mesa takes 15-20 minutes. We conduct a site survey to verify property lines, wind exposure, and utility locations, providing a firm quote and projected start date based on current material lead times and the $45/hr average labor rate.

Is a 12-inch footing deep enough for my Yucca Valley fence posts?

Yes, for frost. The IRC mandates footings below the local frost line, which is 12 inches in Yucca Valley. In Yucca Mesa, posts set shallower will heave from freeze-thaw cycles, causing structural failure. For the 105 MPH V-ult wind load, footings often need greater depth and diameter for overturning resistance, per ASCE 7-22 standards.

What is required before you dig the first post hole?

You must call 811 (DigAlert) at least two business days before digging. Hitting an unmarked gas, water, or fiber line in Yucca Mesa is a major financial and safety liability. We manage the permit paperwork with the Yucca Valley Building Department, ensuring the plot plan and engineering details comply before any equipment arrives.

What are the height and placement rules for a fence in Yucca Valley?

Zoning is strict. The front yard height limit is 3.5 feet; rear and side yards allow 6 feet. Setback is 0 feet, meaning you can build directly on the property line. For corner lots near CA-62, you must maintain a clear 'sight triangle' at intersections. A 6-foot fence in the front yard or one blocking driver sightlines will be red-tagged.

Can I have a smart gate with a pool?

Yes, but integration is key. The gate hardware and IoT latch system must comply with ASTM F2286-05 and IBC 3109 pool barrier codes for self-closing and self-latching. A modern system logs access and sends tamper alerts, which strengthens liability defense. We spec integrated smart latches that meet both security trends and California's stringent safety code.

What fence materials work best in Yucca Valley's soil?

Material compatibility is critical. The moderate soil corrosivity index requires G90 galvanized steel posts and fasteners. Aluminum or stainless hardware is better. Pressure-treated wood is standard, but the moderate termite risk in Yucca Mesa makes concrete, steel, or composite posts a more durable long-term choice. Inferior fasteners cause rust streaks on stucco within two seasons.



Scroll to Top
CALL US NOW