Top Fencing Companies in Colorado Springs, CO, 80809 | Compare & Call
There are 240 fencing companies server in Colorado Springs CO
Open Range Services and Repair
Open Range Services and Repair is a Colorado Springs-based general contractor specializing in fences, gates, decks, and home remodeling. Located near the Broadmoor and Old Colorado City, they serve ne...
Magic Welding and Fence Company provides expert fence and gate services to homeowners in Hudson, Colorado, and the surrounding Weld County area. Hudson’s windy conditions and rural properties often le...
American Exteriors has been serving Colorado Springs homeowners for over a decade, specializing in deck construction, fence installation, and gate repair. Colorado Springs' extreme weather—heavy snow,...
Colorado Custom Exteriors, based in Colorado Springs, CO, was founded by a craftsman who started in carpentry and framing at age 16. After years of building and a deep commitment to hands-on work—dona...
Amaesing Service is a Colorado Springs-based company founded on the belief that quality home improvements should be accessible to everyone. Guided by a principle of putting God first, then family, we ...
A&N Construction serves Colorado Springs and the surrounding areas with expert fence, gate, deck, and door services. We built our company on a foundation of quality craftsmanship, clear communication,...
H3 Handi-Works is a veteran-owned home maintenance service based in Colorado Springs, CO. Founded by a retired Air Force veteran with 20 years of service and 12 years as a university campus director, ...
Ethereal Landscape And Design
Ethereal Landscape And Design serves Colorado Springs homeowners by addressing common fencing issues like leaning, rust, or wind damage—often caused by the area's heavy clay soils and gusty mountain w...
Cedar Mountain Fencing serves Colorado Springs, CO, offering expert fence, gate, and deck services. The local climate—heavy snow, intense sun, and hail—can cause wood rot, rust, and warping. The team ...
Aztec Services Smart Space Solutions
Aztec Services Smart Space Solutions provides expert painting, fencing, and window installation services to homeowners and businesses across Colorado Springs, CO. The high winds and dry climate common...
Estimated Fencing Costs in Colorado Springs, CO
Common Questions
What are the critical steps before digging fence post holes?
Call Colorado 811 at least three business days before excavation. In the Old North End with its mature infrastructure, hitting a gas, fiber, or irrigation line is a major liability event that incurs repair costs and fines. Concurrently, file for a fence permit with the Pikes Peak Regional Building Department; the process includes submitting a site plan and paying associated fees. Do not proceed without both clearances.
Am I legally required to notify my neighbor before building a fence?
Yes, for any fence on a shared lot line. Colorado Revised Statutes 35-46-111, the 'Good Neighbor Fence Act,' requires written notice to adjoining landowners at least 30 days before construction. In 2026, this notification must include material specifications and a proposed cost-sharing agreement. Failure to provide notice forfeits your right to seek contribution.
How soon can a crew start a fence project in the Old North End?
A consultation typically requires 24-48 hours to schedule. The standard route from our office near Palmer Park uses I-25 for efficient dispatch across the city. Accounting for neighborhood traffic and site review, expect an on-site consultation within the quoted 25-35 minute window. Post-consultation, material lead times and permit approval govern the actual start date.
Why are fence post footings so deep in Colorado Springs?
The 30-inch frost line depth is the controlling factor for structural stability. Post footings must extend below this depth to prevent frost heave, which lifts and cracks fence panels. In the Old North End's expansive clay soils, posts set above the frost line will fail within two freeze-thaw cycles. IRC Section R403.1.4.1 mandates this depth for permanent footings.
How do I make sure my fence can handle the wind?
Colorado Springs has a V-ult wind speed of 115 mph. This ultimate design wind load dictates post spacing, concrete footing size, and bracket strength. A standard 6-foot fence in an exposure category near Palmer Park typically requires 8-foot post spacing with 12-inch diameter concrete footings. Lapped picket or board-on-board designs must be engineered to prevent failure during peak storm season downslope gusts.
What are the height and placement rules for a fence in Colorado Springs?
Zoning code limits fences to 4 feet in front yards and 6 feet in rear/side yards. A 0-foot setback is permitted on the property line. For corner lots, a critical 'sight triangle' clearance is required at intersections to maintain driver visibility; this often prohibits solid fencing within 15 feet of the corner. Proximity to I-25 access ramps triggers additional traffic safety reviews.
Can I add a smart gate to my existing fence for pool safety?
Integrating an automated, self-closing smart gate is a moderate trend that directly addresses liability. Colorado Springs City Code 17.48 requires pool barriers with self-closing, self-latching gates meeting ASTM F1906. Modern IoT gate systems provide audit trails of latch engagement, which strengthens your defense against negligence claims in the event of an incident.
What fence materials hold up best to local soil and pests?
Material selection must account for moderate soil corrosivity and slight to moderate termite risk. Pressure-treated wood must be rated for ground contact (UC4B). For metal fences, hot-dip galvanized steel or aluminum is required; use only stainless steel or silicon-bronze fasteners to prevent rust streaks. In the Old North End's historic district, all materials require a Certificate of Appropriateness (COA).