Top Fencing Companies in Glendale, CO, 80246 | Compare & Call
There are 239 fencing companies server in Glendale CO
New Legacy Construction serves homeowners in Denver, CO, specializing in custom decks, fences, and outdoor living spaces that are built to last. We focus on reliable service, fair pricing, and quality...
RAM’S Construction
RAM’S Construction serves Denver, CO, as a full-service contractor specializing in fences & gates, masonry/concrete, and landscaping. The company addresses the frequent local issue of damaged fences a...
Mad Hammer Forge serves Englewood, CO, providing expert metal fabrication and fence and gate services. Located near the historic Englewood Depot and the bustling Broadway corridor, we address the area...
Primos Landscaping, based in Denver, CO, specializes in fences, gates, and full-service landscaping. Denver’s intense sun, freeze-thaw cycles, and clay-heavy soil often cause wooden fences to warp, cr...
Mountain Tech Living, based in Denver, CO, specializes in eco-elegant landscape design, fence and gate installation, repair, painting, staining, and weatherproofing. Founder Travis brings over ten yea...
Fox Brothers Woodcraft, founded in 2019, is a family-owned woodworking company based in Denver, Colorado. We specialize in custom design and installation of fences, decks, and pergolas for homeowners,...
Rhino Fence Company is a family-owned business that has been installing fences for over 20 years. Founded in Ventura, California, and now serving the Denver Metro Area, we are dedicated to helping hom...
Cardinal Carpentry is a Denver-based handyman service specializing in decks, railings, fences, and gates. Many Denver homes face fencing issues like warped wood from snow melt, loose posts from freeze...
Legendary Landscapes serves homeowners across Denver, from the tree-lined streets of Washington Park to the historic homes in Capitol Hill and the modern developments in the Highlands. Denver’s climat...
PheonixScapes is a trusted provider of fences, gates, and lawn services for homeowners across Denver, CO. From the historic bungalows in Washington Park to the modern builds in LoDo, Denver’s unique c...
Estimated Fencing Costs in Glendale, CO
Frequently Asked Questions
How does Glendale's soil affect my choice of fence materials?
Moderate soil corrosivity and a slight to moderate termite risk demand material compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks and premature failure.
What are the legal steps for replacing a shared fence with my neighbor in Glendale?
Colorado Revised Statutes 35-44-101 defines a partition fence. In 2026, you must provide written notice to the adjoining landowner before replacing a shared boundary fence. This establishes shared maintenance responsibility and prevents future disputes over the property line.
What are the height and placement rules for a fence on my Glendale property?
Glendale zoning limits are 4 feet in front yards and 6 feet in rear yards, with a standard 0-foot setback on the property line. Corner lots near I-25 require a clear 'sight triangle' for traffic visibility. Any fence in this zone must be under 3 feet tall and non-opaque.
Why is a 30-inch footing depth critical for a fence post in Glendale?
The 30-inch frost line depth in the Glendale Residential Core requires footings below that level. Frost heave exerts upward force on shallow posts, causing misalignment and structural failure per IRC Section R403.1.4. Posts set above this depth will heave and fail.
How do we engineer a fence to withstand 115 MPH winds in Glendale?
The 115 MPH V-ult wind speed rating dictates structural design per ASCE 7-22 standards. This requires reduced post spacing, concrete footings with proper embedment, and wind-rated brackets. The design must withstand peak storm season gusts, especially for exposed lots.
What is required before digging fence post holes in my neighborhood?
You must contact Colorado 811 for a utility locate at least three business days before excavation. Hitting a gas or electrical line in the Glendale Residential Core is a major liability. Our service manages the 811 ticket and coordinates with the Glendale permit office for approval.
How soon can a project start after we approve the quote?
We typically schedule site work within 5-7 business days. Our crew routes from Infinity Park via I-25, arriving at your Glendale property in 15-25 minutes for the initial consultation to finalize footing locations and verify property lines.
Can a smart gate meet pool safety codes in Colorado?
Yes. Modern IoT gate systems integrate self-latching and self-closing mechanisms that comply with IBC/IRC Appendix AG. This meets the 54-inch height and automatic closure requirement, creating a verifiable audit trail for liability protection against unauthorized access.
