Top Fencing Companies in Glendale, CO, 80246 | Compare & Call
There are 239 fencing companies server in Glendale CO
303 Fence, serving Denver since its founding, focuses on delivering expert craftsmanship at fair prices for both residential and commercial clients. Specializing in cedar fence installation and repair...
The Superior Finish, a family-run company based in Aurora, CO, has over a decade of experience in exterior wood care. Founded by Lindsay and Ryan, the business was born from a passion for restoring an...
Yescas Construction, based in Littleton, CO, provides expert masonry, concrete, landscaping, and fencing services to local homeowners and businesses. Many properties in neighborhoods like Ken Caryl an...
D & D Fencing is a family-owned fencing company based in Denver, Colorado, proudly serving the Denver Metro Area since 2000. We specialize in fence and gate installation, repair, painting, staining, a...
Trophy Fence, LLC is a small, family-run fencing company based in Denver, Colorado. Founded in 2012 by a Colorado native who started building fences at age 15, the business is built on decades of hand...
Denver Fence Construction, owned by Louise, has been a staple in the Denver area for over 25 years. As a family-owned business, we specialize in installing, repairing, and maintaining fences and gates...
MB & J Landscaping and Concrete
MB & J Landscaping and Concrete serves Arvada, CO, and the Denver metro area with hands-on experience in landscaping, fences and gates, and snow removal. Located near the intersection of Wadsworth Bou...
Open Range Fence is a Parker, CO fencing company founded by a contractor who grew up building fences with his father in Utah. After visiting Colorado, he decided to move here and start his own busines...
C J Grey Construction
C J Grey Construction, founded by Chris J. Grey in 2009, is a licensed and insured construction company serving the Denver Metropolitan Area. We specialize in concrete work, fencing and gates, and dec...
KenG Fence has been serving the Denver and Boulder areas since 1981, owned and operated by Ken G. as a family-run business. We specialize in fence and gate installation, repair, painting, staining, an...
Estimated Fencing Costs in Glendale, CO
Frequently Asked Questions
How does Glendale's soil affect my choice of fence materials?
Moderate soil corrosivity and a slight to moderate termite risk demand material compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks and premature failure.
What are the legal steps for replacing a shared fence with my neighbor in Glendale?
Colorado Revised Statutes 35-44-101 defines a partition fence. In 2026, you must provide written notice to the adjoining landowner before replacing a shared boundary fence. This establishes shared maintenance responsibility and prevents future disputes over the property line.
What are the height and placement rules for a fence on my Glendale property?
Glendale zoning limits are 4 feet in front yards and 6 feet in rear yards, with a standard 0-foot setback on the property line. Corner lots near I-25 require a clear 'sight triangle' for traffic visibility. Any fence in this zone must be under 3 feet tall and non-opaque.
Why is a 30-inch footing depth critical for a fence post in Glendale?
The 30-inch frost line depth in the Glendale Residential Core requires footings below that level. Frost heave exerts upward force on shallow posts, causing misalignment and structural failure per IRC Section R403.1.4. Posts set above this depth will heave and fail.
How do we engineer a fence to withstand 115 MPH winds in Glendale?
The 115 MPH V-ult wind speed rating dictates structural design per ASCE 7-22 standards. This requires reduced post spacing, concrete footings with proper embedment, and wind-rated brackets. The design must withstand peak storm season gusts, especially for exposed lots.
What is required before digging fence post holes in my neighborhood?
You must contact Colorado 811 for a utility locate at least three business days before excavation. Hitting a gas or electrical line in the Glendale Residential Core is a major liability. Our service manages the 811 ticket and coordinates with the Glendale permit office for approval.
How soon can a project start after we approve the quote?
We typically schedule site work within 5-7 business days. Our crew routes from Infinity Park via I-25, arriving at your Glendale property in 15-25 minutes for the initial consultation to finalize footing locations and verify property lines.
Can a smart gate meet pool safety codes in Colorado?
Yes. Modern IoT gate systems integrate self-latching and self-closing mechanisms that comply with IBC/IRC Appendix AG. This meets the 54-inch height and automatic closure requirement, creating a verifiable audit trail for liability protection against unauthorized access.
