Top Fencing Companies in Lamar, CO, 81052 | Compare & Call

There are 12 fencing companies server in Lamar CO

TNT Fabrication

TNT Fabrication

Lamar CO 81052
Metal Fabricators, Fences & Gates

TNT Fabrication in Lamar, CO, brings over a decade of expertise in welding, fabrication, fencing, and repair. Specializing in metal fabrication, they work with carbon steel, stainless steel, cast iron...

Stampede Services

Stampede Services

204 Main St, Wiley CO 81092
General Contractors, Fences & Gates, Demolition Services

Stampede Services is a family-owned construction company based in Wiley, Colorado, founded in 2019. With over 15 years of hands-on experience in agriculture, renewable energy, and construction, we bri...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Lamar, CO

Emergency Fence/Gate RepairStorm / Security Response
$309 - $414
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $69
Standard Driveway Gate InstallEstimated Range
$1,104 - $1,479

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Lamar. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

Do I need to notify my neighbor before building a fence in Colorado?

Yes. Colorado Revised Statutes 35-46-112, the 'good neighbor' law, requires written notification to adjoining landowners before constructing a partition fence on a shared boundary in Lamar. This is a 2026 legal requirement for any shared property line.

How deep should my fence posts be in Lamar?

Set posts a minimum of 30 inches deep to pass the frost line. Posts in Downtown Lamar that are set shallower will be subject to frost heave, causing failure at the footing. The IRC requires this depth to ensure structural stability against seasonal ground movement.

What fencing material holds up best in Lamar's soil?

With moderate soil corrosivity and a slight to moderate termite risk, material compatibility is critical. Use pressure-treated wood rated for ground contact or vinyl. For metal posts and hardware, specify hot-dip galvanized steel fasteners to prevent rust streaks and premature failure.

Are smart gates or secure latches required for pools?

The IBC/IRC International Swimming Pool and Spa Code mandates self-closing, self-latching gates. While IoT smart gate integration is a low trend in Lamar, any automatic latch system must meet these code standards to limit homeowner liability in Colorado.

Is my fence designed for high winds in Lamar?

Fences must be engineered for the local V-ult wind speed of 115 MPH. This rating dictates post spacing, concrete footing size, and bracket strength. A properly designed fence will survive peak storm season gusts without panel failure or uplift.

How soon can you start a fencing project in Lamar?

We typically schedule consultations within one week. Our route from the Lamar Community Building via US-50 allows for a 10-15 minute response time to most properties in the Downtown area for an initial site assessment and quote.

What are the fence height and placement rules for my Lamar property?

Zoning limits are 3 feet in the front yard and 6 feet in the rear yard, with a 0-foot setback allowing construction on the property line. For corner lots, maintain a clear 'sight triangle' at intersections, especially near US-50, to ensure driver visibility and comply with city traffic safety ordinances.

What are the first steps before digging fence post holes?

Call Colorado 811 at least three business days before excavation. Hitting a utility line in Downtown Lamar is a major financial and safety liability. We manage the required permit paperwork with the city office to ensure the project is documented and compliant.



Scroll to Top
CALL US NOW