Top Fencing Companies in Littleton, CO, 80120 | Compare & Call
There are 229 fencing companies server in Littleton CO
R&S Fencing & Design is a licensed fencing contractor serving Denver, CO, and the surrounding areas within a 50-mile radius. We specialize in custom iron and cedar wood fence installations, along with...
I’m a dog owner and wooden fence repair specialist serving Boulder and the Denver Metro Area, including the Foothills. After my own fence blew down and I received a dog-at-large citation, I fixed it f...
Integrity Fencing & Supply, based in Littleton, CO, is a licensed fencing company serving residential and commercial clients across the Denver area. As the managing owner, I bring years of experience ...
AU Need A Fence, owned and operated by Jim in Lakewood, CO, brings a family legacy of fencing craftsmanship that spans generations. Jim learned the trade from his father and siblings, and he applies t...
Mendoza & Sons is a family-owned landscaping, fencing, and gutter service based in Denver, Colorado. Serving the metro area from their headquarters near the intersection of I-25 and I-70, they bring d...
Denver Fence Guys, established in 2007 in Bettendorf, Iowa, relocated to Colorado when owner Barrett Pribyl brought his Midwestern work ethic to the Denver area. Serving Commerce City and the greater ...
Colorado Fence and Deck, founded in 2006 by U.S. Marine Corps veteran Ryan Lucero, is a licensed, bonded, and insured fencing and decking company serving Littleton and the Denver metro area. We specia...
Mendoza Brother’s is a family-owned landscaping, fencing, and concrete company serving Watkins, CO, and surrounding areas since 2010. As a small business, we focus on delivering high-quality work and ...
Sureshot Metal Works is a family-owned metal fabrication and fence company based in Denver, run by my wife and me. We started this business because too many Colorado homeowners were stuck with rushed ...
Denver Remodels in Edgewater, CO, is owned and operated by Steve Beam, a Boston native who moved to Denver in 2001. With over 24 years of construction experience, Steve started his career framing hous...
Estimated Fencing Costs in Littleton, CO
Common Questions
What are the height and setback rules for a fence on my Littleton property?
Littleton zoning enforces a 4-foot height limit in front yards and 6 feet in rear yards. The standard setback is 0 feet, allowing installation on the property line. For corner lots, especially near US-85 (Santa Fe Drive), you must maintain a clear 'sight triangle' at intersections—typically a 10-foot setback from property lines—for driver visibility. The Downtown Historic District requires additional architectural review.
How soon can a crew start, and what is the consultation process?
A consultation is typically scheduled within 48 hours. Our route from the Littleton Museum via US-85 (Santa Fe Drive) allows for a 25-35 minute response to most Downtown properties. The on-site assessment reviews property lines, utility marks, zoning constraints, and provides a firm quote based on the $45/hour average labor rate and material lead times.
Am I legally required to notify my neighbor before replacing a shared fence in Colorado?
Yes. Colorado Revised Statutes § 35-44-101 (Partition Fence Act) governs shared boundaries. As of 2026, you must provide written notice to the adjoining landowner before altering a partition fence. In Littleton, this formal notice is critical for establishing cost-sharing and avoiding neighbor disputes post-installation.
Is a standard fence design strong enough for Littleton's wind loads?
No. Littleton's 115 MPH V-ult wind speed rating (ASCE 7-22) dictates engineering. A standard 8-foot panel will fail. Designs must use reduced post spacing (often 6-foot centers), concrete footings below frost, and wind-rated brackets. This engineering is critical to survive peak storm season gusts channeled along the South Platte corridor.
Which fencing materials hold up best against Littleton's soil and insect conditions?
With low-to-moderate soil corrosivity and slight-to-moderate termite risk, material compatibility is key. Pressure-treated pine, cedar, and composite materials perform well. For metal posts and fasteners, use hot-dip galvanized or stainless steel to prevent rust streaks. Avoid untreated wood in direct ground contact near the Littleton Museum's older, moist soils.
How deep should fence posts be set in Littleton to prevent frost heave?
Footings must extend to the 36-inch frost line. Posts set shallower will heave each winter. The 2021 International Residential Code (IRC) R403.1.4.1 mandates this depth for structural stability in Littleton's clay soils. Failure to comply is the primary cause of racking and failure in Downtown Littleton neighborhoods.
What are the safety requirements for a fence around a pool, and can I integrate a smart gate?
Pool fences in Colorado must meet IBC/IRC Appendix AG: a minimum 48-inch height, self-closing hinges, a self-latching device, and a non-climbable design. Modern systems integrate IoT-enabled latches that log access and send alerts. This combination satisfies both the 2026 smart-gate trend for convenience and the strict liability standards for barrier compliance.
What are the required steps before digging fence post holes?
You must contact Colorado 811 at least three business days before excavation. They mark public utility lines. Hitting an unmarked line in a dense neighborhood like Downtown Littleton creates major liability and repair costs. Simultaneously, submit a permit application to the City of Littleton; approvals typically address height, location, and historic district compliance.
