Top Fencing Companies in Littleton, CO, 80120 | Compare & Call
There are 229 fencing companies server in Littleton CO
Columbine Garage Door is a family-owned business that has served Littleton and the Front Range community for over 23 years. We specialize in the installation and repair of residential and commercial o...
C&M Welding is a trusted metal fabrication and fence repair company serving Littleton, CO, and the surrounding area. Littleton’s frequent freeze-thaw cycles and strong winds often cause fence posts to...
All Seasons Fence & Repair has been serving Littleton, CO, families since 2005, specializing in fence and gate installation, repair, and maintenance. Located just off Santa Fe Drive near the historic ...
JC's Landscaping provides dependable landscaping, fencing, and junk removal services to homeowners in Littleton, CO. Locals often face fence wear and tear from Colorado's intense sun and sudden hailst...
Native Outdoor Care is a family-owned and operated business based in Littleton, CO, with over 15 years of experience in outdoor maintenance. We handle everything from routine lawn mowing and aeration ...
Galdamez Painting and Remodeling is a trusted local contractor serving Littleton, CO, and the surrounding areas. Specializing in fences & gates, painting, and general remodeling, the company helps hom...
Frontier Fencing and Home Solutions is a family-owned and operated business serving Littleton, CO, and the surrounding areas. We specialize in fence and gate installation, repair, painting, staining, ...
All Star Fence serves Littleton, CO, providing expert fence installation and repair for local homeowners. Littleton's variable weather, including heavy snow and strong sun, can cause wood rot, warping...
New Gen Landscape serves homeowners and businesses in Littleton, CO, providing expert landscaping, fencing, and masonry services. The company addresses a common local issue: wind-damaged or leaning fe...
Skys the Limit-Home Renovation in Littleton, CO, is a handyman and home renovation service run by Skyler, whose passion for building and fixing started as a kid helping his dad on weekends. Over the y...
Estimated Fencing Costs in Littleton, CO
Common Questions
What are the height and setback rules for a fence on my Littleton property?
Littleton zoning enforces a 4-foot height limit in front yards and 6 feet in rear yards. The standard setback is 0 feet, allowing installation on the property line. For corner lots, especially near US-85 (Santa Fe Drive), you must maintain a clear 'sight triangle' at intersections—typically a 10-foot setback from property lines—for driver visibility. The Downtown Historic District requires additional architectural review.
How soon can a crew start, and what is the consultation process?
A consultation is typically scheduled within 48 hours. Our route from the Littleton Museum via US-85 (Santa Fe Drive) allows for a 25-35 minute response to most Downtown properties. The on-site assessment reviews property lines, utility marks, zoning constraints, and provides a firm quote based on the $45/hour average labor rate and material lead times.
Am I legally required to notify my neighbor before replacing a shared fence in Colorado?
Yes. Colorado Revised Statutes § 35-44-101 (Partition Fence Act) governs shared boundaries. As of 2026, you must provide written notice to the adjoining landowner before altering a partition fence. In Littleton, this formal notice is critical for establishing cost-sharing and avoiding neighbor disputes post-installation.
Is a standard fence design strong enough for Littleton's wind loads?
No. Littleton's 115 MPH V-ult wind speed rating (ASCE 7-22) dictates engineering. A standard 8-foot panel will fail. Designs must use reduced post spacing (often 6-foot centers), concrete footings below frost, and wind-rated brackets. This engineering is critical to survive peak storm season gusts channeled along the South Platte corridor.
Which fencing materials hold up best against Littleton's soil and insect conditions?
With low-to-moderate soil corrosivity and slight-to-moderate termite risk, material compatibility is key. Pressure-treated pine, cedar, and composite materials perform well. For metal posts and fasteners, use hot-dip galvanized or stainless steel to prevent rust streaks. Avoid untreated wood in direct ground contact near the Littleton Museum's older, moist soils.
How deep should fence posts be set in Littleton to prevent frost heave?
Footings must extend to the 36-inch frost line. Posts set shallower will heave each winter. The 2021 International Residential Code (IRC) R403.1.4.1 mandates this depth for structural stability in Littleton's clay soils. Failure to comply is the primary cause of racking and failure in Downtown Littleton neighborhoods.
What are the safety requirements for a fence around a pool, and can I integrate a smart gate?
Pool fences in Colorado must meet IBC/IRC Appendix AG: a minimum 48-inch height, self-closing hinges, a self-latching device, and a non-climbable design. Modern systems integrate IoT-enabled latches that log access and send alerts. This combination satisfies both the 2026 smart-gate trend for convenience and the strict liability standards for barrier compliance.
What are the required steps before digging fence post holes?
You must contact Colorado 811 at least three business days before excavation. They mark public utility lines. Hitting an unmarked line in a dense neighborhood like Downtown Littleton creates major liability and repair costs. Simultaneously, submit a permit application to the City of Littleton; approvals typically address height, location, and historic district compliance.
