Top Fencing Companies in Littleton, CO, 80120 | Compare & Call
There are 229 fencing companies server in Littleton CO
C J Grey Construction
C J Grey Construction, founded by Chris J. Grey in 2009, is a licensed and insured construction company serving the Denver Metropolitan Area. We specialize in concrete work, fencing and gates, and dec...
KenG Fence has been serving the Denver and Boulder areas since 1981, owned and operated by Ken G. as a family-run business. We specialize in fence and gate installation, repair, painting, staining, an...
Denver Fence Specialists, founded by Roman Lefevre, is a locally-owned fence installation and repair company serving the Denver Metro Area. Roman, originally from France and a Coloradan for over 10 ye...
Juarez Landscaping Services is a local Denver, CO company that provides landscaping, irrigation, and fencing solutions. We handle everything from garden design and lawn care to tree trimming and stump...
Mile High Railings, LLC is a family-owned metal fabricator serving Centennial and the Denver metro area. Based in Denver, we specialize in custom railings, gates, staircases, and handrails. For local ...
Marquez Fencing is a family-owned and operated fence company based in Denver, Colorado, with over 20 years of experience serving Broomfield and surrounding communities. We specialize in the installati...
Rocky Mountain Vinyl Supply in Aurora, CO, is a local fence fabricator specializing in durable, maintenance-free vinyl fencing. Using in-house CNC machines, we custom-cut every panel, rail, and picket...
Jeffco Metalworks is a locally owned fence and gate company serving Morrison, CO, and the surrounding areas. Specializing in both metal fabrication and traditional fence installation, they address com...
Master Fence Builders serves Denver, CO homeowners and businesses with durable fence and gate solutions. They handle installation, painting and staining, repair, and weatherproofing for both manual an...
Lucero Fence Company, established in 2007 and rooted in Arvada since 1982, brings over six years of dedicated service to Denver-area fencing. We build fences with the same care and quality we would at...
Estimated Fencing Costs in Littleton, CO
Common Questions
What are the height and setback rules for a fence on my Littleton property?
Littleton zoning enforces a 4-foot height limit in front yards and 6 feet in rear yards. The standard setback is 0 feet, allowing installation on the property line. For corner lots, especially near US-85 (Santa Fe Drive), you must maintain a clear 'sight triangle' at intersections—typically a 10-foot setback from property lines—for driver visibility. The Downtown Historic District requires additional architectural review.
How soon can a crew start, and what is the consultation process?
A consultation is typically scheduled within 48 hours. Our route from the Littleton Museum via US-85 (Santa Fe Drive) allows for a 25-35 minute response to most Downtown properties. The on-site assessment reviews property lines, utility marks, zoning constraints, and provides a firm quote based on the $45/hour average labor rate and material lead times.
Am I legally required to notify my neighbor before replacing a shared fence in Colorado?
Yes. Colorado Revised Statutes § 35-44-101 (Partition Fence Act) governs shared boundaries. As of 2026, you must provide written notice to the adjoining landowner before altering a partition fence. In Littleton, this formal notice is critical for establishing cost-sharing and avoiding neighbor disputes post-installation.
Is a standard fence design strong enough for Littleton's wind loads?
No. Littleton's 115 MPH V-ult wind speed rating (ASCE 7-22) dictates engineering. A standard 8-foot panel will fail. Designs must use reduced post spacing (often 6-foot centers), concrete footings below frost, and wind-rated brackets. This engineering is critical to survive peak storm season gusts channeled along the South Platte corridor.
Which fencing materials hold up best against Littleton's soil and insect conditions?
With low-to-moderate soil corrosivity and slight-to-moderate termite risk, material compatibility is key. Pressure-treated pine, cedar, and composite materials perform well. For metal posts and fasteners, use hot-dip galvanized or stainless steel to prevent rust streaks. Avoid untreated wood in direct ground contact near the Littleton Museum's older, moist soils.
How deep should fence posts be set in Littleton to prevent frost heave?
Footings must extend to the 36-inch frost line. Posts set shallower will heave each winter. The 2021 International Residential Code (IRC) R403.1.4.1 mandates this depth for structural stability in Littleton's clay soils. Failure to comply is the primary cause of racking and failure in Downtown Littleton neighborhoods.
What are the safety requirements for a fence around a pool, and can I integrate a smart gate?
Pool fences in Colorado must meet IBC/IRC Appendix AG: a minimum 48-inch height, self-closing hinges, a self-latching device, and a non-climbable design. Modern systems integrate IoT-enabled latches that log access and send alerts. This combination satisfies both the 2026 smart-gate trend for convenience and the strict liability standards for barrier compliance.
What are the required steps before digging fence post holes?
You must contact Colorado 811 at least three business days before excavation. They mark public utility lines. Hitting an unmarked line in a dense neighborhood like Downtown Littleton creates major liability and repair costs. Simultaneously, submit a permit application to the City of Littleton; approvals typically address height, location, and historic district compliance.
