Top Fencing Companies in Redlands, CO, 81507 | Compare & Call
There are 45 fencing companies server in Redlands CO
England Fence is a family-owned and operated fencing company based in Montrose, CO, serving the Western Slope of Colorado for over 41 years. We specialize in fabricating and installing custom fences a...
G&C Fencing serves Parachute, CO, and the surrounding areas with professional fence and gate services. From the neighborhoods near Battlement Mesa to the ranches along the Colorado River, they handle ...
Henni Fencing proudly serves Grand Junction, CO, specializing in high-quality fences and gates that stand up to Western Colorado's unique climate. Local homes often face fencing challenges like leanin...
DJ's Landscaping serves homeowners in Fruita, CO, addressing common fencing problems like rot, leaning, and gate misalignment caused by poor drainage or overgrown vegetation. Located near the Colorado...
Creed Specialties serves Grand Junction, CO, offering metal fabrication, fencing, gates, and tree services. Many local homes face fencing issues like warping from intense sun, rust from occasional moi...
Patriot Fencing serves Grand Junction, CO, tackling common fencing issues like weather damage from intense UV rays, wind, and snow. Many local homes face warped wood, rusted metal, or sagging gates. T...
Top Notch Fence in Montrose, CO, is a family-owned business that has been serving the Western Slope since 2005. Purchased by Matt Hill while living in Kremmling, the company moved to Montrose in 2008 ...
Leach's Industrial
Leach's Industrial has been a trusted partner for metal fabrication in Grand Junction, CO, serving both residential and commercial clients near the Colorado River and Main Street corridor. Many local ...
Keen Services is a locally owned and operated landscaping, patio covering, and fence and gate company serving Grand Junction, Colorado. For homeowners across the Grand Valley, common fencing issues li...
Classic Copper and Iron
Classic Copper and Iron is a Grand Junction metal fabrication shop founded by Rick, who brings over 40 years of experience in metalwork and 20 years in ski lift manufacturing to every project. After a...
Estimated Fencing Costs in Redlands, CO
Common Questions
What is required before digging fence post holes?
You must contact Colorado 811 for a utility locate. Hitting a gas, water, or fiber line in the Redlands neighborhood incurs major liability and repair costs. We manage the 811 ticket and coordinate the resulting markout with the local permit office paperwork to prevent delays.
What are the height and setback rules for a Redlands fence?
Zoning limits are 4 feet for front yards and 6 feet for rear yards. Setbacks are 0 feet, allowing installation on the property line. Corner lots require special attention to visibility 'sight triangles'—no obstructions over 3 feet high within 25 feet of the intersection, a critical rule for safety near I-70.
Am I legally required to notify my neighbor before building a fence in Redlands?
Yes. Colorado Revised Statutes 35-46-102, the 'Good Neighbor Fence Act,' mandates notification for any shared boundary fence. Since 2026, this includes a formal written notice sent via certified mail at least 30 days prior to construction to avoid legal disputes over a partition fence.
Why do fence posts in Redlands need such deep footings?
The frost line depth is 36 inches. Posts not set below this line are subject to frost heave, which lifts them out of alignment. Following IRC standards for this depth prevents structural failure by ensuring the footing is in stable, unfrozen soil.
How soon can a consultation be scheduled in Redlands?
We dispatch from the Colorado National Monument area. The route via I-70 allows for a 25 to 35 minute response time to the Redlands neighborhood. We can typically schedule a site assessment and structural consultation within 48 hours of your request.
How do Redlands soil and pests influence material choice?
Moderate soil corrosivity and slight to moderate termite risk dictate compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals like aluminum. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from forming on the finish.
How is a fence engineered for high winds in Redlands?
The V-ult wind speed rating of 115 mph dictates the design. This engineering standard from ASCE 7-22 requires closer post spacing, deeper footings, and wind-rated brackets to resist uplift. This ensures the structure survives peak storm season gusts channeled from the Colorado National Monument.
Do smart gates comply with pool safety codes?
Yes. Modern IoT-integrated gates with self-closing, self-latching mechanisms meet IBC/IRC Appendix AG standards. The smart-gate trend focuses on integrating these latches with home security systems, creating an auditable trail that satisfies liability standards for Colorado homeowners with pools.
