Top Fencing Companies in Norwalk, CT, 06850 | Compare & Call

There are 92 fencing companies server in Norwalk CT

Remy Fence & Masonry

Remy Fence & Masonry

193 Hall Ave, Wallingford CT 06492
Fences & Gates, Masonry/Concrete

Remy Fence & Masonry, based in Wallingford, CT, is a family-owned business founded in 2021 by Remy, who brings over 21 years of hands-on experience in fencing and masonry. Remy is personally involved ...

BY Home Solutions

BY Home Solutions

Norwalk CT 06850
General Contractors, Decks & Railing, Fences & Gates

BY Home Solutions is a trusted general contractor serving Norwalk, CT, with expertise in decks, railings, fences, and home additions. The company addresses a common local issue: wooden fences deterior...

New World Iron Works

New World Iron Works

Bethel CT 06801
Metal Fabricators, Fences & Gates, Decks & Railing

New World Iron Works, based in Bethel, CT, provides custom metal fabrication services specializing in ornamental railings, fences, and gates. The team of skilled metal fabricators crafts durable, styl...

Supreme Garage Door Repair Of Fairfield County

Supreme Garage Door Repair Of Fairfield County

★★★★☆ 4.0 / 5 (4)
Stamford CT 06902
Garage Door Services, Fences & Gates

Supreme Garage Door Repair Of Fairfield County is a locally owned and operated service provider serving Stamford and all of Fairfield County, Connecticut. Since taking over the business, the focus has...

Atlas Outdoor

Atlas Outdoor

777 West Putnam Ave, Greenwich CT 06830
Fences & Gates, Patio Coverings, Outdoor Furniture Stores

Atlas Outdoor, established in 1977, is a locally owned Connecticut fence company serving Greenwich and surrounding areas. With nearly five decades of experience, we combine master craftsmanship with m...

Grant Painting

Grant Painting

★★★★★ 5.0 / 5 (1)
Manchester CT 06040
Painters, Fences & Gates, Drywall Installation & Repair

Grant Painting, based in Manchester, CT, has been delivering quality painting and finishing services since 2017. Founded by a lead painter with over 15 years of experience, the company serves resident...

Fence Factory

Fence Factory

★★★★☆ 4.3 / 5 (11)
22 Dyke Ln, Stamford CT 06902
Fences & Gates

Fence Factory Inc., a family-owned fencing contractor, has been serving Stamford and the surrounding areas since 1977. Founded by Salvatore Bellissimo, the business is now run by his sons, Phil and Ja...

Fences Etc

Fences Etc

★★★★☆ 4.3 / 5 (11)
54 Research Dr, Stamford CT 06906
Fences & Gates

Fences Etc has been serving Stamford, CT, and the surrounding areas of Fairfield and Westchester counties for over 40 years. As a family-owned fencing contractor, we specialize in custom fence and gat...

Riverside Fence

Riverside Fence

★★★★★ 4.5 / 5 (8)
137 Ethan Allen Hwy, Ridgefield CT 06877
Fences & Gates, Decks & Railing

Riverside Fence has been serving Ridgefield, CT, and the surrounding areas for over 30 years, offering expert fence and deck construction, repair, and replacement. As a family-owned business, we speci...

One Stop 360

One Stop 360

★☆☆☆☆ 1.0 / 5 (1)
Stamford CT 06902
General Contractors, Fences & Gates, Roofing

One Stop 360, established in 2007, is a licensed general contractor serving Stamford and lower Fairfield County. Founder Herson Lopez began learning carpentry at 15, framed his first home at 21, and o...



Estimated Fencing Costs in Norwalk, CT

Emergency Fence/Gate RepairStorm / Security Response
$339 - $459
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,219 - $1,634

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Norwalk. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

How does Norwalk's wind load rating affect fence design?

The 120 MPH V-ult wind speed rating dictates structural design. This ultimate design wind speed, per ASCE 7-22 standards, requires specific post spacing, concrete footing mass, and bracket strength. Standard 8-foot-on-center post spacing often fails. For exposed sites, especially those with clear exposure from I-95, spacing must be reduced to 6 feet or less with reinforced footings to survive peak storm season gusts.

What is the typical timeline and route for a consultation in Downtown Norwalk?

We schedule consultations within 1-3 business days. For a site near the Norwalk Green, our standard dispatch route uses I-95 for direct access, accounting for typical traffic patterns. This results in a reliable 25 to 35-minute response window for an on-site evaluation. We confirm the appointment with a precise ETA the morning of the visit.

Why must fence footings extend below the frost line in Norwalk?

Norwalk's 42-inch frost line depth mandates this. Posts set within the frost zone will experience frost heave. This cyclic freezing and thawing lifts and weakens footings, causing permanent structural failure. IRC Table R301.2(1) references this 42-inch requirement. Soil conditions in Downtown Norwalk, particularly near the Norwalk Green, require footings engineered to this standard.

What fencing materials are suitable for Norwalk's environment?

Material selection must address moderate soil corrosivity and termite risk. Pressure-treated wood is standard, but all steel components—posts, brackets, and fasteners—require hot-dipped galvanized or powder-coated finishes to prevent rust. Aluminum or composite materials are also viable. Using stainless steel fasteners is critical to prevent unsightly rust streaks on lighter-colored fences, which degrade curb appeal.

What is the utility locate process before digging in Norwalk?

Calling CBYD Connecticut 811 is a legal and critical first step. The service marks public underground lines for free. In Downtown Norwalk, with its dense network of gas, electric, and data lines, hitting one is a major liability causing service outages and fines. We manage the CBYD ticket and coordinate the resulting markings with the required Norwalk Building Department permit paperwork before any excavation.

What are the height and setback rules for a Norwalk fence?

Norwalk zoning enforces a 4-foot height limit for front yards and 6 feet for rear yards. Fences may be placed on the property line (0-foot setback). Critical visibility is required for corner lots. A 10-foot sight triangle must be maintained at intersections, especially for properties with access to major roads like I-95. Any fence obstructing driver sightlines at these corners violates city code.

What are the notification requirements for a shared fence in Norwalk?

Connecticut General Statutes Section 47-49, the 'partition fence' law, applies. You must provide formal written notice to the adjoining property owner before constructing or replacing a boundary fence. As of 2026, this notice must be delivered via certified mail or another method that provides proof of receipt. Failure to comply can result in legal disputes and cost-sharing complications.

How do modern pool gates integrate with smart technology?

Integrated IoT latches are now standard for meeting the 2021 IBC Appendix AG pool safety code. A self-closing, self-latching gate with a release mechanism 54 inches above grade is mandatory. Modern systems add smart sensors that log entry events and send real-time alerts to a homeowner's phone. This combination satisfies both Connecticut's liability standards and the moderate smart-gate trend for enhanced property security.



Scroll to Top
CALL US NOW