Top Fencing Companies in Big Pine Key, FL, 33043 | Compare & Call

Big Pine Key Fencing Company

Big Pine Key Fencing Company

Big Pine Key, FL
Fencing Company

Phone : 888-524-1778

Looking for reliable fence contractors in Big Pine Key, state-short? Big Pine Key Fencing Company specializes in professional fence design and installation.
FEATURED

There are 21 fencing companies server in Big Pine Key FL

Quality Fence And Gates

Quality Fence And Gates

★★☆☆☆ 2.2 / 5 (6)
Hialeah FL 33010
Fences & Gates

Quality Fence And Gates serves Hialeah, FL, providing expert fence and gate painting and staining. Hialeah's humid subtropical climate often leads to wood fence rot, while strong winds can damage viny...

Griffiths Metal Products

Griffiths Metal Products

★★★★☆ 3.7 / 5 (19)
10461 SW 184th Ter, Miami FL 33157
Fences & Gates, Shutters, Metal Fabricators

Griffiths Metal Products has been a family-owned metal fabrication company serving Miami, FL, since 1961. Operating from the same location since 1967, we specialize in custom fences, gates, shutters, ...

Gate Openers Unlimited

Gate Openers Unlimited

★★★★☆ 4.0 / 5 (1)
10900 NW 146th St Ste 107, Hialeah Gardens FL 33018
Fences & Gates, Garage Door Services

Gate Openers Unlimited, based in Hialeah Gardens, FL, is a dedicated provider of fences, gates, and garage door services. Serving both residential and commercial clients, the company positions itself ...

Florida Dura Fence

Florida Dura Fence

14271 SW 120th St, Miami FL 33186
Fences & Gates, General Contractors

Florida Dura Fence, based in Miami, FL, specializes in durable fence and gate solutions tailored to the city's unique climate challenges. Located near landmarks like the Dolphin Mall and neighborhoods...

Tex Services

Tex Services

Miami FL 33170
Metal Fabricators, Fences & Gates, Handyman

Tex Services is a Miami-based handyman, metal fabrication, and fencing company serving residential and commercial clients across the city. We handle everything from appliance installation and drywall ...

Harmony Home Improvement

Harmony Home Improvement

Key West FL 33040
Handyman, Fences & Gates, Painters

Harmony Home Improvement serves Key West and the Lower Keys with comprehensive handyman services. From Old Town to Stock Island, the team handles painting, drywall, fence and gate repair, gutter maint...

Monroe County Fence

Monroe County Fence

★★★★☆ 3.7 / 5 (3)
Key Largo FL 33037
Fences & Gates, General Contractors

Monroe County Fence Company has been serving Key Largo and the surrounding Florida Keys since 1987. We are a family-owned business now led by the third generation, with Jesse Matthews carrying on the ...

Anchor Aluminum Products

Anchor Aluminum Products

6475 2nd St, Key West FL 33040
Metal Fabricators, Fences & Gates

Anchor Aluminum Products is a locally owned and operated aluminum seller and manufacturer serving Key West, FL. We specialize in metal fabrication, including custom shutters (Bahama, colonial, accordi...

Florida Ocean Fence

Florida Ocean Fence

3920 S Roosevelt Blvd, Key West FL 33040
Fences & Gates

Florida Ocean Fence, LLC has been serving Key West homeowners and businesses with reliable fence and gate services for years. Located in the heart of the island, we understand that a fence does more t...

CZ Craft

CZ Craft

6471 B 3rd St, Key West FL 33040
Metal Fabricators, Fences & Gates, Decks & Railing

CZ Craft has been a trusted licensed metal fabricator in Key West since 2000, serving both residential and commercial clients. We specialize in crafting and installing durable structures from aluminum...

« PreviousPage 1 of 3Next Page »


Estimated Fencing Costs in Big Pine Key, FL

Emergency Fence/Gate RepairStorm / Security Response
$284 - $384
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$1,014 - $1,359

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Big Pine Key. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What is the correct foundation for a fence post in Big Pine Key? Do we need deep footings for frost?

Frost is not a design factor in Big Pine Key, as the local frost line depth is 0 inches. The primary engineering challenge is wind uplift and overturning. For a 180 MPH V-ult wind rating, posts require a ballasted concrete footing or helical anchor designed for High Velocity Hurricane Zone (HVHZ) loads per ASCE 7-22. Inadequate foundations are the leading cause of post-rotation failures in Big Pine Key Estates during tropical storms.

How is a fence engineered to survive a 180 mph hurricane wind?

A 180 MPH V-ult wind speed dictates the entire structural design. This is not a 'sustained' wind but an ultimate design velocity for the HVHZ. It requires reduced post spacing (often 6 feet on-center or less), continuous concrete footings, and wind-rated brackets that connect rails to posts. The design must account for both positive pressure on the windward side and uplift/suction on the leeward side. Standard residential fence designs typically fail under these loads.

Can I install an automatic gate that also meets pool safety laws?

Yes. Modern security integrates the Florida Residential Swimming Pool Safety Act (Chapter 515) with smart technology. A perimeter fence or gate enclosing a pool must have a self-closing, self-latching device. Solar-powered IoT gate operators are a moderate trend here, providing grid-independent access control. The latch can be integrated with smart-home systems, but its primary mechanical function must always comply with the state's barrier code to limit liability.

How high can I build my fence in the front and back yards?

Big Pine Key zoning limits fences to 4 feet in height in the front yard and 6 feet in the rear. Corner lots have additional restrictions. A 'sight triangle' must be maintained at intersections to ensure driver visibility; this is critical for properties with access points near US-1. No fence, hedge, or structure can obstruct the view within this triangle, which is typically a 10-foot area from the property corner.

How soon can a consultation be scheduled, and what is your service area?

Consultations are typically scheduled within 3-5 business days. Our primary service route for Big Pine Key Estates originates near the Big Pine Key Community Park, proceeding via US-1. This allows for a consistent 15-20 minute response window for on-site assessments. We factor this travel time into our daily dispatch logistics to provide punctual, reliable scheduling for project estimates.

What preparation is required before digging fence post holes?

Florida law mandates contacting Sunshine 811 at least two full business days before any excavation. This free service coordinates with all utilities to mark underground lines. Hitting a power, communications, or water line in Big Pine Key Estates results in significant repair costs, service outages, and liability. The fence permit from the Monroe County Building Department will not be issued without a cleared 811 ticket. We manage this paperwork as part of the project workflow.

What are the legal steps for replacing a fence shared with my neighbor?

Florida law, specifically the Good Neighbor Fence Act (Florida Statute 588.011), governs shared boundary fences. The 2026 standard requires providing written notice to adjoining landowners at least 30 days prior to construction or replacement. This initiates a formal dialogue on cost-sharing and material selection. The fence must remain entirely within your property lines, as the local setback regulation is 0 feet from the boundary.

What fencing materials hold up best to the salt air and insects here?

Material compatibility is critical. The soil corrosivity index is High, and termite risk is Very Heavy. Use only pressure-treated wood rated for ground contact or marine-grade aluminum. All hardware—nails, screws, brackets—must be 316-grade stainless steel or hot-dip galvanized to ASTM A153. Inferior fasteners will rust, causing unsightly streaks and premature joint failure. Vinyl is not recommended due to high wind load concerns.



Scroll to Top
CALL US NOW