Top Fencing Companies in Hudson, FL, 34667 | Compare & Call
There are 143 fencing companies server in Hudson FL
LP Fencing Experts provides fence and gate services to homeowners and businesses across Tampa Bay, FL, including neighborhoods such as Seminole Heights, Hyde Park, and areas near the Bayboro Marina. C...
Affordable Fence in Port Richey, FL, specializes in solving common fencing problems faced by local homeowners, such as gate sagging from moisture damage and gate latch failures. Located near the sceni...
Local Choice Fence has served Plant City and Central Florida for over 20 years, treating every fence installation as if it were our own home. As owner, I work with you from the initial meeting to fina...
Action Mobile Metal Works in Apopka, FL, specializes in custom metal fabrication for fences and gates. With frequent storm debris in the area causing fence damage and gate latch failures, their mobile...
LM Industrial
LM Industrial, owned by Christian Diaz, is a Veteran-Owned metal fabrication and supply company in Orlando, FL. With over 31 years of experience, we provide custom metal fabrication, fence and gate in...
American Project 407
American Project 407 is a veteran-owned home improvement company serving homeowners in Davenport, FL, including neighborhoods like ChampionsGate, Ridgewood Lakes, and communities near Posner Park. Fou...
Armour Horse Stalls, based in DeLand, FL, has specialized in manufacturing high-quality aluminum horse stall components since 1992. Serving the equestrian industry, the company produces non-rusting st...
Fence by Rodriguez provides expert fence installation, repair, and maintenance for homeowners in Orlando, FL. We tackle local challenges like vegetation overgrowth damaging wood fences and salt air co...
Fencers Welding and Fabrication
Fencers Welding and Fabrication is a licensed fence and gate contractor serving Clearwater and the surrounding counties for over 20 years. As a veteran-owned and operated business, we specialize in re...
Bimini Home Services is a St. Petersburg-based handyman and contracting business owned by a licensed general contractor with decades of experience across the country. Born in Bradenton and raised in t...
Estimated Fencing Costs in Hudson, FL
Frequently Asked Questions
What are the height and placement rules for a fence on my corner lot?
Zoning limits are 4 feet in the front yard and 6 feet in the rear. The 0-foot setback allows building directly on your property line. However, corner lots must maintain a clear 'sight triangle' at intersections—typically a 10-foot area from the curb where no structure over 3 feet is permitted. This is critical for visibility near major roads like US-19 and is strictly enforced by the Pasco County Development Review Committee.
How is my fence designed to handle hurricane-force winds?
The design follows ASCE 7-22 standards for a 145 MPH V-ult wind speed. This engineering rating dictates a maximum 8-foot panel span between 4x4 posts set in concrete, and the use of wind-rated brackets like Simpson Strong-Tie CBC. For the Sea Pines area, we reduce this span to 6 feet for added safety due to exposure from Robert J. Strickland Memorial Park, which creates a wind tunnel effect during summer thunderstorms.
How soon can a project manager visit my property for a consultation?
A structural consultant can typically be dispatched within 48 hours. The standard route from our office near Robert J. Strickland Memorial Park is north on US-19, providing direct access to the Sea Pines community. Accounting for mid-morning traffic, the estimated travel time for an on-site assessment is 25-35 minutes. The consultation will review zoning limits, wind load requirements, and the Sunshine 811 marking status.
What is the correct footing depth for fence posts in Hudson, FL?
Hudson's frost line depth is officially 0 inches, but post stability depends on soil bearing capacity and wind uplift. For the 145 MPH V-ult wind rating in Sea Pines, we set posts a minimum of 24 inches deep and use concrete footings that exceed IRC R403.1.4 standards for lateral load. This prevents post rotation during peak storm season gusts from the west, which travel unimpeded from US-19.
Can I install an automatic gate for my pool area?
Yes, but it must comply with the Residential Swimming Pool Safety Act (Chapter 515). The gate must self-close and self-latch to a height of 54 inches. Integrating a moderate smart-gate IoT system is now standard; it allows remote monitoring and provides an audit trail, which strengthens your liability defense. The latch mechanism must be non-keyed on the pool side to meet the 2026 Florida Building Code update.
What are the steps before digging fence post holes?
First, call Sunshine 811 at least three full business days before excavation. They mark all public utility lines. Striking an unmarked line in Sea Pines, often privately installed irrigation or low-voltage lighting, is a major liability that can result in repair costs and fines. We then pull the required permit from the Pasco County Building Division, which includes the site plan showing the 0-foot setback and the Florida Product Approval for the wind-rated fence system.
Am I legally required to notify my neighbor about a new fence on our property line?
Yes. Florida Statute 844.01, the Good Neighbor Fence Law, requires written notice to adjoining landowners before replacing a shared 'partition fence.' Since May 2026, Hudson's code enforcement requires this notification to include the proposed materials, height, and a 14-day response period. Building 'on line' under the 0-foot setback regulation does not waive this notice requirement.
What fence materials hold up best against Hudson's termites and soil?
With a Very Heavy termite risk level and Moderate soil corrosivity, material compatibility is critical. Pressure-treated Southern Yellow Pine must be ground-contact rated (UC4B). For vinyl or aluminum, use stainless steel or hot-dip galvanized fasteners rated for coastal exposure; anything less will cause rust streaks within 18 months. Avoid wood posts in direct soil contact unless they are preservative-treated to AWPA UC4A standard.