Top Fencing Companies in Inglis, FL, 34449 | Compare & Call

There are 64 fencing companies server in Inglis FL

Seminole Fence

Seminole Fence

★★★★★ 5.0 / 5 (1)
3371 NW Blitchton Rd, Ocala FL 34475
Fences & Gates

Seminole Fence, based in Ocala, FL, has been a trusted fencing contractor for over 15 years. Serving both residential and commercial clients, we specialize in the custom design, installation, repair, ...

All Surfaces CPR

All Surfaces CPR

Fort McCoy FL 32134
Masonry/Concrete, Fences & Gates, Pressure Washers

All Surfaces CPR, based in Fort McCoy, FL, provides comprehensive masonry, concrete, fencing, gate, and pressure washing services. We specialize in decorative concrete, epoxy coatings, paver sealing a...

Fence by Rodriguez

Fence by Rodriguez

Orlando FL 32809
Fences & Gates

Fence by Rodriguez provides expert fence installation, repair, and maintenance for homeowners in Orlando, FL. We tackle local challenges like vegetation overgrowth damaging wood fences and salt air co...

Hill's Fencing & Gates

Hill's Fencing & Gates

★★☆☆☆ 2.3 / 5 (3)
915 E Ohio Ave, Lake Helen FL 32744
Fences & Gates

Hill's Fencing & Gates, established in 1998, is a licensed fencing contractor serving Lake Helen and neighboring Central Florida communities like DeLand and Deltona. We specialize in a wide range of f...

Medrano's Mobile Welding Services

Medrano's Mobile Welding Services

2523 Garza Rd, Zolfo Springs FL 33890
Metal Fabricators, Trailer Repair, Fences & Gates

Raymond, owner and operator of Medrano's Mobile Welding Services, brings dependable on-site welding and metal repair to Zolfo Springs and surrounding areas like Wauchula and Bowling Green. Since Decem...

B-Lev's Mobile Welding and Repair

B-Lev's Mobile Welding and Repair

★★★★★ 5.0 / 5 (2)
6850 SE 34th Pl, Trenton FL 32693
Metal Fabricators, Fences & Gates

B-Lev's Mobile Welding and Repair serves Trenton, FL, and the surrounding area, offering reliable metal fabrication services. We understand the local challenges, such as fence mold and mildew growth c...

Freestyle Pro Services

Freestyle Pro Services

★☆☆☆☆ 1.0 / 5 (2)
2836 NE 19th Dr, Gainesville FL 32609
Metal Fabricators, Fences & Gates, Building Supplies

Freestyle Pro Services, based in Gainesville, FL, specializes in metal fabrication, fence and gate installation, and building supplies. Serving neighborhoods from Haile Plantation to the Duckpond area...

Florida Floor & Remodel

Florida Floor & Remodel

Gainesville FL 32605
Flooring, Tiling, Fences & Gates

Florida Floor & Remodel is a trusted local provider of flooring, tiling, and fence and gate services in Gainesville, FL. Serving neighborhoods like Haile Plantation and near the University of Florida,...

Dan's Gate Worx

Dan's Gate Worx

Chiefland FL 32626
Fences & Gates

Dan's Gate Worx is a locally operated fence and gate company based in Chiefland, FL. Starting with gate operator repairs, the business expanded into full-service ornamental entrance gates, automatic g...

Bill Tripp Fence

Bill Tripp Fence

Fort McCoy FL 32134
Fences & Gates

Bill Tripp Fence is a locally owned and operated fencing contractor serving Fort McCoy, FL, and the surrounding areas. We specialize in the installation, repair, and weatherproofing of fences and gate...



Estimated Fencing Costs in Inglis, FL

Emergency Fence/Gate RepairStorm / Security Response
$284 - $384
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$1,014 - $1,359

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Inglis. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Florida Statute 844.01, the 'Good Neighbor Fence Law,' defines a 'partition fence' on a boundary line. As of 2026, you must provide adjoining landowners in Inglis with written notice of intent to build or replace a shared fence. This starts a 15-day negotiation period for cost sharing. Failure to provide notice forfeits your right to recover half the construction costs.

Why do fence posts need deep concrete footings in Inglis if there is no frost line?

Footing depth is a structural stability issue, not just frost protection. The IRC mandates a minimum embedment of 24 inches for posts to resist 145 MPH V-ult wind loads. In Inglis Town Center, shallow posts in sandy soil will pivot and fail under hurricane-force gusts. We pour reinforced concrete footings to a 30-inch depth to create a fixed-base moment connection that meets ASCE 7-22 standards.

What is required before you can dig the fence post holes?

State law requires a utility locate request through Sunshine 811 at least two full business days before digging. We manage this ticket and the Town of Inglis permit paperwork. Hitting an unmarked gas, water, or fiber line in the Inglis Town Center is a major financial and safety liability. We do not turn a shovel until all lines are marked and the permit is posted on site.

Do I need a special gate latch if I have a pool?

Yes. The Florida Residential Swimming Pool Safety Act (Chapter 515) requires all pool barrier gates to be self-closing and self-latching. The latch must be on the pool side, at least 54 inches high. While smart-gate IoT integration is a low trend here, an integrated alarm latch that sends an alert to your phone is now a standard upgrade to meet modern liability and safety standards.

What fence materials hold up best against termites and coastal air?

With a Very Heavy termite risk and Moderate soil corrosivity, material compatibility is critical. Pressure-treated Southern Yellow Pine is the standard, but it requires a .60 retention treatment for ground contact. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. We avoid steel posts in soil unless they are fully galvanized, as corrosion at the ground line will cause premature failure.

What are the height and placement rules for a fence on my property?

Inglis zoning limits fences to 4 feet in front yards and 6 feet in rear yards. The 0-foot setback allows building directly on the property line. Critical rule: Corner lots must maintain a clear 'sight triangle' at intersections. If your property is near US Highway 19, you must keep all vegetation and fencing under 3 feet high within 25 feet of the intersection curb lines for driver visibility.

How soon can you start a project, and what is your consultation process?

We schedule consultations within 48 hours. Our standard route from the Withlacoochee River Park office uses US Highway 19, providing a 15-25 minute response time to most Inglis addresses. The consultation includes a site survey, soil check, and a review of your property plat to confirm setbacks and boundaries. From signed contract to start date is typically 7-10 days, pending permit approval.

How is my fence designed to survive hurricane winds?

The 145 MPH V-ult wind speed rating is the ultimate design wind speed for the Inglis area. This engineering standard dictates post spacing (no more than 8 feet on-center for a 6-foot fence), concrete footing size, and bracket strength. We use through-bolt connections and continuous rail brackets instead of face-nailing. This system transfers wind load into the ground to survive peak storm season gusts without panel failure.



Scroll to Top
CALL US NOW