Top Fencing Companies in Melbourne Beach, FL, 32951 | Compare & Call

There are 76 fencing companies server in Melbourne Beach FL

Horizon Fence

Horizon Fence

Melbourne FL 32904
Fences & Gates

Horizon Fence is a family-owned and operated fence company serving Melbourne, Florida, and the surrounding areas. We specialize in fence and gate installation, repair, painting, staining, and weatherp...

Central Florida Fence

Central Florida Fence

★★★★★ 4.5 / 5 (8)
Merritt Island FL 32953
Fences & Gates

Central Florida Fence serves Merritt Island, FL, providing expert fence and gate solutions tailored to the area's unique climate challenges. Located near the Merritt Island Mall and a short drive from...

Pauley's Residential & Commercial Remodeling

Pauley's Residential & Commercial Remodeling

Palm Bay FL 32907
Handyman, Flooring, Fences & Gates

Pauley's Residential & Commercial Remodeling serves Palm Bay, FL, as a full-service home renovation and improvement contractor for both residential and commercial properties. We specialize in handyman...

Dennis's Home Services

Dennis's Home Services

1132 Kareena St NW, Palm Bay FL 32907
Flooring, Fences & Gates, General Contractors

Dennis's Home Services is a husband and wife-owned home remodeling business based in Palm Bay, FL. With a lifetime of construction experience—learning the trade from his father—Dennis brings a dedicat...

Armour Custom Renovations

Armour Custom Renovations

Palm Bay FL 32909
Fences & Gates, Painters, Flooring

Armour Custom Renovations, LLC, founded in 2012, is a family-owned renovation contractor serving residential and commercial clients in Palm Bay, FL. Founded by a prior first responder, the company bri...

Rocco’s Handyman

Rocco’s Handyman

Melbourne FL 32904
Fences & Gates, Painters, Landscaping

Based in Melbourne, FL, Rocco’s Handyman specializes in fences & gates, painting, and landscaping for residential properties. Our team brings over 20 years of experience to every job—from small drywal...

East Coast Fence & Guardrail

East Coast Fence & Guardrail

★★☆☆☆ 2.2 / 5 (11)
651 Pam Lem St, Cocoa FL 32926
Fences & Gates

East Coast Fence & Guardrail is a family-owned fence company serving Cocoa and all of Brevard County since 1999. With over 30 years of experience, we specialize in residential, commercial, and governm...

A&D Pressure Wash and More

A&D Pressure Wash and More

3544 Burdock Ave, Melbourne FL 32904
Fences & Gates, Pressure Washers

With 15 years of experience in fencing and 10 years specializing in wood seals and colors, A&D Pressure Wash and More serves Melbourne, FL with a focus on custom gates, repairs, and automatic gate sys...

Michels Screening

Michels Screening

★★☆☆☆ 1.6 / 5 (8)
1398 Hazel St NW, Melbourne FL 32904
Fences & Gates, Masonry/Concrete, Patio Coverings

Michels Screening provides expert fencing, gates, masonry, concrete, and patio covering services to Melbourne, FL homeowners. Living in Brevard County means dealing with storm debris and flooding that...

360 Fencing Solutions

360 Fencing Solutions

7994 Windover Way, Titusville FL 32780
Fences & Gates

360 Fencing Solutions serves Titusville, FL, homeowners dealing with common fencing issues like broken gate hinges and damaged ornamental fencing. Located conveniently near US-1 and the Indian River, ...



Estimated Fencing Costs in Melbourne Beach, FL

Emergency Fence/Gate RepairStorm / Security Response
$284 - $384
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$1,014 - $1,359

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Melbourne Beach. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

Can I have a smart gate with a pool? What are the code requirements?

Yes. The Florida Residential Swimming Pool Safety Act (Chapter 515) mandates specific barriers. Any gate must be self-closing, self-latching, and open outward. A smart-gate IoT system must integrate hardware that physically meets these standards, not just remote access. We use actuators certified to fail in the locked position during a power outage. This combines modern access control with proven liability protection.

My neighbor says posts only need to be 18 inches deep here. Is that correct for Melbourne Beach?

No. The IRC mandates footings below the local frost line to prevent frost heave. Melbourne Beach's frost line depth is 0 inches, but this is a minimum. For the 160 MPH V-ult wind loads on the Ocean Avenue Corridor, driven by exposure from A1A and the Atlantic, posts require engineered footings. Typical 4x4 posts fail under lateral load without concrete piers sized for soil-bearing capacity and overturning moment. We design to ASCE 7-22 standards.

What do you do before digging the first post hole?

We file a ticket with Sunshine 811 at least three full business days before excavation. This free service marks all public underground utilities. Hitting a line in the Ocean Avenue Corridor, with its dense infrastructure, creates major liability and service disruptions. Concurrently, we submit the engineered site plan to the Melbourne Beach permit office, ensuring the footing design and height comply with all coastal overlay guidelines before mobilization.

How high can I build my fence, and does it matter if I have a corner lot?

Zoning height limits are 4 feet for front yards and 6 feet for rear/side yards. The setback regulation is 0 feet, permitting installation on the property line. For corner lots, a critical 'sight triangle' regulation applies. No visual obstruction over 3 feet high is allowed within 25 feet of the intersection, especially near A1A. This ensures driver visibility and is strictly enforced by Brevard County.

Will a standard 6-foot privacy fence survive a hurricane here?

A standard catalog fence will not. Survival depends on engineering for the 160 MPH V-ult wind speed rating. This 'ultimate design wind speed' dictates post spacing, concrete footing mass, and bracket strength. For example, 4-foot post spacing may reduce to 6-foot spacing. We calculate wind pressure per ASCE 7-22, using Exposure Category D for coastal zones, to design a system that resists peak storm season gusts without racking or failure.

How soon can you start a project, and what is your consultation process?

Initial consultation typically occurs within 3-5 business days. Our field specialist routes from Ryckman Park via A1A, with a travel time of 15-25 minutes to your property in the Ocean Avenue Corridor. The consultation includes a site survey, soil assessment, and review of property plats to identify easements. Following this, we provide a formal proposal with engineered drawings within one week, pending permit approval timelines.

Why do you recommend aluminum or composite over wood for this area?

Material compatibility is critical. The soil corrosivity index is High, and termite risk is Very Heavy. Pressure-treated pine requires stainless steel (Type 316) fasteners to prevent rust streaks from salt air; even then, ground contact invites termites. Hot-dip galvanized steel or aluminum alloys are standard. For the Ocean Avenue Corridor, we specify powder-coated aluminum or cellular PVC composites to avoid organic decay and galvanic corrosion.

Do I need to tell my neighbor if I replace the old fence between our properties?

Yes. Florida Statute 712.01 and common law establish fencing easements. Since 2026, Melbourne Beach coastal overlay guidelines reinforce a formal notification requirement for any shared boundary, or 'partition fence,' work. Provide written notice 30 days prior. This documents the agreement on style, cost-sharing, and property line verification, preventing future adverse possession claims.



Scroll to Top
CALL US NOW