Top Fencing Companies in Ocklawaha, FL, 32179 | Compare & Call

There are 132 fencing companies server in Ocklawaha FL

Browne's Yard Creations

Browne's Yard Creations

1009 Pine Ridge Dairy Rd, Fruitland Park FL 34731
Landscaping, Fences & Gates

Browne's Yard Creations, founded by Spencer in 2020, is a trusted fence and backyard company serving Fruitland Park and Central Florida. Starting as a fencer, Spencer built the business on clear commu...

MJ Pro Construction

MJ Pro Construction

St. Petersburg FL 33702
General Contractors, Fences & Gates

MJ Pro Construction handles general contracting, fencing, and gate work for homes and businesses in St. Petersburg, FL. Located near the Grand Central District and just a few miles from Tropicana Fiel...

Hill's Fencing & Gates

Hill's Fencing & Gates

★★☆☆☆ 2.3 / 5 (3)
915 E Ohio Ave, Lake Helen FL 32744
Fences & Gates

Hill's Fencing & Gates, established in 1998, is a licensed fencing contractor serving Lake Helen and neighboring Central Florida communities like DeLand and Deltona. We specialize in a wide range of f...

Medrano's Mobile Welding Services

Medrano's Mobile Welding Services

2523 Garza Rd, Zolfo Springs FL 33890
Metal Fabricators, Trailer Repair, Fences & Gates

Raymond, owner and operator of Medrano's Mobile Welding Services, brings dependable on-site welding and metal repair to Zolfo Springs and surrounding areas like Wauchula and Bowling Green. Since Decem...

Gator Fence Company

Gator Fence Company

1225 SW 1st Ave Ste 424, Gainesville FL 32601
Fences & Gates, General Contractors

Gator Fence Company, founded by Willie Hudson in Gainesville, FL, grew from a simple neighborhood project into a trusted local fence and gate service. Willie’s appreciation for fine craftsmanship, esp...

B-Lev's Mobile Welding and Repair

B-Lev's Mobile Welding and Repair

★★★★★ 5.0 / 5 (2)
6850 SE 34th Pl, Trenton FL 32693
Metal Fabricators, Fences & Gates

B-Lev's Mobile Welding and Repair serves Trenton, FL, and the surrounding area, offering reliable metal fabrication services. We understand the local challenges, such as fence mold and mildew growth c...

Freestyle Pro Services

Freestyle Pro Services

★☆☆☆☆ 1.0 / 5 (2)
2836 NE 19th Dr, Gainesville FL 32609
Metal Fabricators, Fences & Gates, Building Supplies

Freestyle Pro Services, based in Gainesville, FL, specializes in metal fabrication, fence and gate installation, and building supplies. Serving neighborhoods from Haile Plantation to the Duckpond area...

Big Sun Fencing

Big Sun Fencing

★★★☆☆ 2.5 / 5 (18)
1883 NW 58th Ln, Ocala FL 34475
Fences & Gates

Big Sun Fencing has been a family-owned fixture in Ocala since 1989, operating from a 12,000-square-foot manufacturing facility near the Silver Springs area. We specialize in designing, fabricating, a...

Pinnacle Site Work

Pinnacle Site Work

Anthony FL 32617
Masonry/Concrete, Fences & Gates, Tree Services

Pinnacle Site Work is a locally owned and operated business in Anthony, FL, run by a dedicated owner-operator who brings hands-on experience across multiple trades. Specializing in masonry and concret...

Bill Tripp Fence

Bill Tripp Fence

Fort McCoy FL 32134
Fences & Gates

Bill Tripp Fence is a locally owned and operated fencing contractor serving Fort McCoy, FL, and the surrounding areas. We specialize in the installation, repair, and weatherproofing of fences and gate...



Estimated Fencing Costs in Ocklawaha, FL

Emergency Fence/Gate RepairStorm / Security Response
$284 - $384
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$1,014 - $1,359

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Ocklawaha. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and setback rules for fences in Ocklawaha?

Ocklawaha zoning enforces a 4-foot height limit in front yards and a 6-foot limit in rear yards. The setback regulation allows a 0-foot setback, meaning you can build directly on the property line. For corner lots near SR 25, you must maintain a clear 'sight triangle' at intersections—typically no obstructions over 3 feet high within 10 feet of the curb.

How soon can you start a fencing project in Ocklawaha?

We typically schedule a site consultation within 48-72 hours of inquiry. Our route from the Lake Weir area uses SR 25 for direct access, resulting in a 35-45 minute travel time to most Ocklawaha properties. The consultation includes a zoning measure, wind load assessment, and a firm quote based on the current $32/hr labor rate.

How do you design a fence to survive 140 MPH winds in Florida?

The 140 MPH V-ult wind rating is an ultimate design speed per ASCE 7-22. This dictates post spacing, concrete footing mass, and bracket strength. For Ocklawaha, we reduce standard 8-foot panel spans to 6 feet, use 4x4 posts instead of 4x4s, and specify through-bolt connections. This engineering prevents failure during peak storm season gusts channeled from Lake Weir.

Do smart gates and latches meet Florida's pool safety code?

Yes, when integrated correctly. The Florida Residential Swimming Pool Safety Act (Chapter 515) requires self-closing, self-latching gates. Modern IoT gate systems with integrated sensors and automatic deadbolts meet this standard. For Ocklawaha homeowners, this tech provides an audit trail, which is critical for liability coverage during inspections.

Do fence posts in Ocklawaha need concrete footings below a frost line?

Yes. Ocklawaha has a 0-inch frost line depth, but IRC structural standards require posts set in concrete for lateral stability against wind. In the Ocklawaha Town Center, soil saturation from Lake Weir can cause frost heave in rare freezes, leading to post failure. We engineer footings for 140 MPH V-ult wind uplift, not just frost.

What fencing material holds up best against Ocklawaha's termites and soil?

Ocklawaha has a Very Heavy termite risk and Moderate soil corrosivity. Pressure-treated pine must use UC4B or higher treatment. Aluminum or vinyl are inert to both threats. For steel posts, use hot-dip galvanized fasteners with a G185 coating; standard zinc coatings will rust, causing streaks on the finish within two seasons.

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Florida Statute 588.011 defines a 'partition fence' as a shared boundary structure. The 2026 legal interpretation in Ocklawaha requires written notification to adjoining landowners before altering or replacing any shared boundary fence. This formal notice prevents disputes and establishes shared maintenance responsibility.

What is the utility locate process before digging fence post holes?

State law mandates a call to Sunshine 811 at least two full business days before digging. In Ocklawaha Town Center, hitting a buried cable or gas line is a major liability causing service outages and fines. We manage the 811 ticket and coordinate the subsequent Ocklawaha permit office paperwork, which requires the cleared locate report for approval.



Scroll to Top
CALL US NOW