Top Fencing Companies in Olympia Heights, FL, 33143 | Compare & Call
There are 201 fencing companies server in Olympia Heights FL
Zelinski Custom Woodworks, established in 2017 in Pompano Beach, FL, is a family-run carpentry company specializing in custom interior and exterior wood installations. Owner Brian, who began carpentry...
Elite Miami Fencing is a Hispanic-owned company based in Miami, FL, led by Carlos, a dedicated professional who takes pride in delivering quality fencing solutions. With a focus on safety and aestheti...
The Gate Specialist, established in 2016 in Homestead, FL, is a dedicated electric gate motor repair, service, sales, and installation company. We provide affordable gate motors and garage door servic...
Lakebelle Gate & Garage Services, led by Deacon, has been Hialeah's trusted garage door and gate specialist since 2012. What started as a small operation grew into a full-service company known for fas...
Jimenez Fence, established in 1983, is a Miami-based fencing company founded by a Cuban immigrant who arrived in the city in the early 1980s. With over four decades of experience, we specialize in ins...
Olivares Iron Works Corporation, established in 1989, is a certified metal fabrication and fencing company serving Miami, FL. With 34 years of experience, we specialize in aluminum fence fabrication, ...
Osuna Ornamental Fence & Gates
Osuna Ornamental Fence & Gates, based in Miami, FL, is a family-owned business founded by Frank Osuna in 2015. We specialize in fabricating and installing all types of fences and gates, using high-qua...
The King Diaz Fences and Gate is your trusted local expert for fence and gate services in Hialeah, FL. We understand the unique challenges of our humid subtropical climate, which often causes gate sag...
Gonzalez Fence, owned by Dayron González, is a Hialeah-based fencing and decking company specializing in the construction, repair, and replacement of wood, aluminum, PVC, and Durafen fences. We also b...
Florida Pool Fences, based in Pembroke Pines, is a licensed pool safety company with over 40 years of combined experience in manufacturing and installing removable pool safety fences, nets, and covers...
Estimated Fencing Costs in Olympia Heights, FL
Q&A
What are the height and setback rules for fences in Olympia Heights?
Zoning limits are 2.5 feet in the front yard and 6 feet in the rear/side yards, with a 0-foot setback allowing construction directly on the property line. For corner lots, especially those near SR-826 (Palmetto Expressway), the 'sight triangle' regulation is critical. No structure or planting over 2.5 feet tall is permitted within 15 feet of the intersection's curb lines to maintain driver visibility and prevent accidents.
What fence materials are best for Olympia Heights' environment?
Material selection must address two primary factors: very heavy termite risk and high soil corrosivity. Pressure-treated wood is vulnerable to termites. Superior options include vinyl, aluminum, or composite materials. All metal components, including fasteners and post bases, must be hot-dip galvanized or stainless steel to prevent rust stains and failure. Incompatible metals will corrode rapidly in the local soil.
What is the typical timeline for a consultation and project start?
Consultations are scheduled within 3-5 business days. The standard route for Olympia Heights is from Tropical Park, east via the SR-826 (Palmetto Expressway), with a travel time of 25-45 minutes depending on traffic. Following the site assessment and permit acquisition, project start dates are typically scheduled 2-4 weeks out, accounting for material procurement and the current average labor rate of $45 per hour.
How is my fence designed to survive hurricane-force winds?
The design is governed by the V-ult wind speed of 175 mph, per ASCE 7-22 standards. This rating dictates the structural engineering of the entire system. To resist these loads, posts require deeper concrete footings, closer spacing (often 6-8 feet on-center), and hurricane-rated brackets and fasteners. The fence must transfer wind pressure into the ground without racking or collapse, especially during the peak storm season from June to November.
Do modern pool fence gates need special features to comply with Florida law?
Yes. The Florida Residential Swimming Pool Safety Act (Chapter 515) requires pool barrier gates to be self-closing, self-latching, and open outward. The latch must be at least 54 inches high or on the pool side of the gate. In 2026, integrating these gates with smart-home systems (Ring/Nest) for remote monitoring is a growing trend that enhances security and helps demonstrate compliance with liability standards.
How deep should my fence posts be set in Olympia Heights to ensure structural stability?
Fence posts require a concrete footing for stability against high winds, not frost. In Olympia Heights, the V-ult wind speed rating of 175 mph (ASCE 7-22) creates significant overturning forces. Posts must be set in concrete footings at a depth of at least 24-30 inches to resist these lateral loads and prevent failure. The high soil corrosivity index also requires hot-dip galvanized steel posts or stainless steel hardware to prevent rapid degradation.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Florida Statute 712.01 and common law establish rules for 'partition fences' on shared boundaries. In 2026, replacing or constructing a shared fence in Olympia Heights requires formal written notification to the adjoining property owner. This allows for discussion of cost-sharing and design under the 'Fence Viewers' provision. Failure to provide notice can lead to disputes and legal action to recover costs.
What is required before digging fence post holes?
You must contact Sunshine 811 at least two full business days before any excavation. This free service locates and marks underground utility lines. Hitting a gas, water, or fiber optic line in Olympia Heights can cause service outages, injury, and significant financial liability. A professional installer manages this call and typically handles all associated permit paperwork with the local building department to ensure code compliance.