Top Fencing Companies in Sandy Springs, GA, 30092 | Compare & Call

There are 239 fencing companies server in Sandy Springs GA

North Fulton Pressure Washing

North Fulton Pressure Washing

★★★★★ 5.0 / 5 (7)
Alpharetta GA 30022
Pressure Washers, Fences & Gates

North Fulton Pressure Washing is a family-owned and operated company based in Alpharetta, Georgia. We specialize in concrete cleaning and power washing for both residential and commercial properties. ...

Country Estate Fences Of GA

Country Estate Fences Of GA

1545 Canton Rd, Marietta GA 30066
Fences & Gates

Country Estate Fences Of GA serves Marietta, GA, providing expert fence and gate solutions to local homeowners. Based in the heart of Cobb County, the company understands common Marietta issues like g...

Ramirez Landscaping

Ramirez Landscaping

Marietta GA 30008
Landscaping, Fences & Gates, Decks & Railing

Jonathan Ramirez, a 21-year-old with four years of hands-on experience, leads Ramirez Landscaping in Marietta, GA. Specializing in landscaping, fences & gates, and decks & railing, Jonathan brings a p...

1st Choice Fencing

1st Choice Fencing

Powder springs GA 30127
Fences & Gates

1st Choice Fencing is a locally owned, family-run fence business serving Powder Springs and the greater metro Atlanta area. As a small company, we prioritize customer satisfaction and work closely wit...

Exterior Fence Builders

Exterior Fence Builders

★★★☆☆ 2.6 / 5 (5)
390 W Pike St, Lawrenceville GA 30046
Fences & Gates

Exterior Fence Builders, Inc., a family-owned fencing contractor based in Lawrenceville, GA, has been serving Gwinnett County since 1992. Founded by Selvage, who learned carpentry from his uncles in N...

Home Heroes

Home Heroes

Douglasville GA 30135
Flooring, Fences & Gates, Painters

Home Heroes is a local Douglasville, GA based handyman service offering drywall installation and repair, painting, flooring, fence and gate work, and more. We handle general home repairs, carpentry, e...

Great Southern Iron Works Inc

Great Southern Iron Works Inc

★☆☆☆☆ 1.0 / 5 (1)
480 Hembree Holw, Roswell GA 30076
Metal Fabricators, Fences & Gates

Great Southern Iron Works Inc, based in Roswell, GA, has been providing custom wrought iron fabrication to the Atlanta area for over 20 years. Specializing in ornamental ironwork, the company designs ...

Uncle Buck's Painting and Restoration

Uncle Buck's Painting and Restoration

★★★★★ 4.8 / 5 (19)
Dallas GA 30157
Painters, Fences & Gates, Decks & Railing

Founded in 2009 after a storm flooded my grandmother’s three-story home in Austell, Georgia, Uncle Buck’s Painting and Restoration began as a repair and painting project that turned into a lifelong pa...

JE & DA Remodeling and construction

JE & DA Remodeling and construction

1415 Willow Trail Dr, Norcross GA 30093
General Contractors, Fences & Gates

At JE & DA Remodeling and Construction, we are a general contractor serving Norcross, GA, and specialize in building and repairing fences and gates. Many local homeowners face common issues like saggi...

Deck Renewals

Deck Renewals

Marietta GA 30066
Decks & Railing, Fences & Gates

Deck Renewals serves Marietta, GA, specializing in decks, railings, fences, and gates. Located near Marietta Square and the historic Kennesaw Mountain area, we address common local issues like aging f...



Estimated Fencing Costs in Sandy Springs, GA

Emergency Fence/Gate RepairStorm / Security Response
$259 - $354
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$939 - $1,259

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Sandy Springs. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

What is the typical timeline for a consultation and project start?

After initial contact, a site consultation is typically scheduled within 1-3 business days. From the City Springs landmark, our route uses GA-400 for direct access, resulting in a consistent 25-35 minute response time to most properties in the City Center. Project start dates follow material lead times and the utility locate process.

Why do fence posts in Sandy Springs require deep footings?

The 12-inch frost line depth is the primary engineering factor. Posts set above this line are subject to frost heave, which will lift and rack the fence out of alignment. Per IRC Section R403, footings in the Sandy Springs City Center must extend below this line to achieve stable, permanent support. This is non-negotiable for structural integrity.

What are the height and setback rules for fences in Sandy Springs?

Zoning limits are 4 feet in the front yard and 8 feet in the rear yard, with a 0-foot setback allowed on the property line. Critical visibility 'sight triangles' at street corners are enforced, especially for corner lots near major corridors like GA-400. Fences cannot obstruct driver sight lines within this triangle, which is typically a 10-foot area from the curb intersection.

What are my legal obligations when replacing a shared boundary fence?

Georgia Code Section 44-8-1, the 'good neighbor law,' applies. You must provide written notice to the adjoining property owner before constructing or replacing a partition fence on the shared boundary line. As of 2026, this notification is a prerequisite for any shared fence project in Sandy Springs and helps prevent future legal disputes over cost and placement.

How do Sandy Springs' environmental conditions affect material choice?

The 'Very Heavy' termite risk and 'Moderate' soil corrosivity index dictate material compatibility. Pressure-treated Southern Yellow Pine is standard for wood posts, but requires proper ground-contact treatment ratings. For metal, use hot-dip galvanized or aluminum fasteners and brackets to prevent rust streaks from corrosive soils, which are common in the area.

How do smart gates integrate with pool safety codes?

Modern IoT-integrated gate systems must comply with ISPSC 2018, Section 305. The code requires self-closing, self-latching mechanisms with latches placed at a minimum height. A smart gate system provides remote monitoring and access logs, creating a verifiable record of compliance. This integration is a high-trend solution in Georgia for managing modern liability and security standards.

What is the utility location process before digging?

You must contact Georgia 811 at least three business days before any excavation. They will mark public utility lines. Hitting an unmarked line in the Sandy Springs City Center, such as a fiber optic conduit, constitutes major liability and service disruption. A professional installer manages this ticket and coordinates any necessary City permit office paperwork for the project.

How is my fence engineered for high winds?

Sandy Springs has a 115 MPH V-ult wind speed rating per ASCE 7-22 standards. This ultimate design wind speed dictates post spacing, concrete footing size, and bracket strength. A fence not engineered for this V-ult load will likely fail during peak storm season gusts, which channel through areas near GA-400. Proper design accounts for these exposure conditions.



Scroll to Top
CALL US NOW