Top Fencing Companies in Kahaluu, HI, 96744 | Compare & Call

There are 104 fencing companies server in Kahaluu HI

Nohealani

Nohealani

★★★★★ 36.0 / 5 (5)
Urban Honolulu HI 96819
Masonry/Concrete, Fences & Gates

Nohealani provides professional masonry, concrete, fence, and gate services to homeowners and businesses in Urban Honolulu. With Honolulu’s humid subtropical climate, salt air, and frequent rain, many...

Brian's Welding

Brian's Welding

★★★★★ 5.0 / 5 (6)
45-558 Kamehameha Hwy Ste B, Kaneohe HI 96744
Metal Fabricators, Fences & Gates, Decks & Railing

Brian's Welding in Kaneohe, HI, brings over 25 years of certified welding experience to every project. Formerly known as Lopey's Welding, the business has been serving the local community for more tha...

Windward Fence and railing

Windward Fence and railing

Kailua HI 96734
Fences & Gates, Decks & Railing

Windward Fence and Railing is a local Kailua, HI, contractor specializing in fences, gates, decks, and railing. Serving residential and commercial clients, the team offers complete services from deck ...

FabLab808

FabLab808

★★★★★ 5.0 / 5 (2)
Haleiwa HI 96712
Metal Fabricators, Fences & Gates, Decks & Railing

FabLab808 in Haleiwa, HI, is a metal fabrication shop and licensed general contractor specializing in custom residential and light commercial metalwork. Founded by an architect and master metal fabric...

STS Masonry

STS Masonry

★★★★★ 5.0 / 5 (7)
Waipahu HI 96797
Masonry/Concrete, Fences & Gates

STS Masonry, owned by Hanisi Posoa, is a Waipahu-based masonry and concrete company offering comprehensive fence and gate services. We specialize in the installation, repair, painting, staining, and w...

R5 Fencing

R5 Fencing

★★★★★ 46.0 / 5 (10)
Kapolei HI 96707
Fences & Gates

R5 Fencing Hawaii, based in Kapolei, brings over 15 years of combined experience to every fence and gate project. We specialize in vinyl, chain-link, and aluminum fencing, as well as custom motorized ...

Maika'i Masonry Contractor

Maika'i Masonry Contractor

★★★★★ 46.0 / 5 (23)
Mililani HI 96789
Masonry/Concrete, Fences & Gates, Landscaping

Maika'i Masonry Contractor, owned by Moses, is a family-run business based in Mililani, Hawaii. As third-generation masons, we bring over 50 years of combined experience to every project, specializing...

Solid Masonry Contractors

Solid Masonry Contractors

★★★★★ 5.0 / 5 (7)
Kapolei HI 96707
Masonry/Concrete, Stonemasons, Fences & Gates

Solid Masonry Contractors, founded in 2013 by Sione and his family, has been serving Oahu with durable concrete and masonry solutions. Based in Kapolei, HI, the company offers expert concrete repairs,...

Pacific Welding And Manufacturing

Pacific Welding And Manufacturing

★★★★★ 42.0 / 5 (5)
623 Mokauea St, Honolulu HI 96819
Fences & Gates, Decks & Railing

Pacific Welding And Manufacturing, a family-owned business in Honolulu since 2007, specializes in custom metalwork including fences, gates, decks, and railings for residential and commercial clients. ...

DLC Express Fencing

DLC Express Fencing

★★★★★ 36.0 / 5 (14)
Ewa Beach HI 96706
Fences & Gates, Decks & Railing

DLC Express Fencing, LLC is a locally owned and operated fencing company in Ewa Beach, HI, with over 20 years of experience in the construction industry. Founded by Lei, a seasoned entrepreneur since ...



Estimated Fencing Costs in Kahaluu, HI

Emergency Fence/Gate RepairStorm / Security Response
$314 - $419
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $69
Standard Driveway Gate InstallEstimated Range
$1,124 - $1,499

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Kahaluu. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

How soon can a consultation be scheduled, and what is the travel time?

Consultations are typically scheduled within 48-72 hours. Our route from Kahaluu Regional Park via Kamehameha Highway to most addresses in the Kahaluu-Kahaluu Kai neighborhood takes 45-60 minutes, depending on traffic. We factor this travel time into the project schedule. The initial site visit assesses wind exposure, soil conditions, and zoning compliance to provide an accurate engineering estimate.

What are the legal steps for replacing a shared boundary fence in Kahaluu?

Hawaii Revised Statutes Section 665-1 governs partition fences. The 2026 legal requirement is to provide written notice to all adjoining landowners before altering a shared boundary. Failure to notify can result in a civil action for damages. The statute outlines cost-sharing procedures. In Kahaluu, this process must be completed before any permit application is submitted to the county.

What engineering standards dictate fence post footing depth in Kahaluu?

The IRC mandates footings be set below the frost line to prevent frost heave. Kahaluu has a 0-inch frost line, so frost is not a factor. The primary engineering concern is wind. With a 115 MPH V-ult wind rating, footings must provide overturning resistance. Posts in Kahaluu-Kahaluu Kai fail from uplift, not frost. We design footings to ASCE 7-22 standards for soil-bearing capacity and lateral load resistance against wind gusts off the ocean.

What fencing materials are suitable for Kahaluu's environment?

Material compatibility is critical. Kahaluu has very heavy termite risk and high soil corrosivity. Pressure-treated lumber is insufficient. Use 316 stainless steel fasteners and hardware with any material to prevent rust streaks. Recommended materials include aluminum, composite, or hot-dipped galvanized steel with a powder-coated finish. Avoid untreated wood and standard galvanized hardware, which will corrode rapidly in the salt air.

What are the height and setback rules for a fence on my Kahaluu property?

Kahaluu zoning enforces a 4-foot height limit for front yards and a 6-foot limit for rear yards. The setback regulation is 0-foot, meaning you can build on the property line. However, a critical exception is the 'sight triangle' for corner lots. Fences within 10 feet of the intersection of Kamehameha Highway and any street must not exceed 3 feet in height to maintain driver visibility. Violating this creates a liability hazard.

How does the 115 MPH wind rating affect my fence design?

The V-ult wind speed of 115 MPH is the ultimate design wind speed. This rating dictates the structural design to prevent failure during peak storm season gusts. It requires reduced post spacing (often 6 feet on-center or less), deeper footings, and wind-rated brackets. Open designs like aluminum picket fences perform better than solid panels, which act as sails. Engineering calculations for wind load per ASCE 7-22 are mandatory for permit approval.

What preparation is required before digging fence post holes?

You must contact the Hawaii One Call Center (811) at least three business days before excavation. They mark all public underground utilities. Hitting a line in Kahaluu-Kahaluu Kai, especially near older properties, is a major liability that can result in fines and repair costs. After utility clearance, you must submit the fence permit application with engineered drawings to the Department of Planning and Permitting. We manage this entire paperwork process.

Can a smart gate system meet Hawaii's pool safety code?

Yes. Modern IoT gate systems integrate with the pool safety code requirement for a self-closing, self-latching mechanism with the latch positioned at least 54 inches above grade. The system logs entry events and can send real-time alerts. This integration meets modern liability standards for Hawaii homeowners by providing both physical security and digital audit trails, which are becoming a standard in 2026 insurance assessments.



Scroll to Top
CALL US NOW