Top Fencing Companies in Paia, HI, 96779 | Compare & Call

There are 22 fencing companies server in Paia HI

S C Carpentry

S C Carpentry

Paia HI 96779
Carpenters, Fences & Gates, Decks & Railing

S C Carpentry is a Paia-based carpentry business run by Steven, a craftsman who learned the trade from his father and has been working with wood most of his life. The company specializes in interior f...

Manuia Enterprises

Manuia Enterprises

Pukalani HI 96768
Lawn Services, Tree Services, Fences & Gates

Manuia Enterprises LLC, owned and operated by Joe K., has been serving upcountry Maui for 15 years. What started as a lawn care business has grown into a full-service property maintenance company offe...

« Previous PagePage 3 of 3Next »


Estimated Fencing Costs in Paia, HI

Emergency Fence/Gate RepairStorm / Security Response
$314 - $419
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $69
Standard Driveway Gate InstallEstimated Range
$1,124 - $1,499

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Paia. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and placement rules for my Paia fence?

Paia zoning enforces a 3-foot height limit in the front yard and a 6-foot limit in the rear. The setback is 0 feet, meaning you can build directly on your property line. For corner lots near Hana Highway, you must maintain a clear 'sight triangle' at intersections for traffic safety. Any fence in the historic district also requires design review for material and style approval.

What is required before digging fence post holes?

You must contact Hawaii 811 for a full utility locate at least three business days before any excavation. Hitting an underground line in the dense Paia Town Center is a major liability and safety hazard. We manage this process and coordinate all required permits with the Maui County Planning Department to ensure the project proceeds without legal delay.

How soon can a consultant visit my property?

For a site consultation, our standard dispatch route originates near Paia Bay Park and proceeds via Hana Highway (Route 36). Given typical traffic conditions, expect a travel time of 45 to 60 minutes to most locations in Paia. We can typically schedule an initial engineering and zoning assessment within the current work cycle.

Can I have an automatic gate for my pool?

Yes, but it must integrate with strict pool safety codes. Hawaii County Code requires a barrier that is at least 54 inches high with self-closing and self-latching gates. A smart-gate system with an integrated IoT-controlled latch can meet this requirement, providing remote access while maintaining the constant latching standard necessary for modern liability protection in Hawaii.

What are the neighbor notification rules for a fence in Paia?

Hawaii Revised Statutes Section 664-1, the partition fence statute, defines a shared boundary. As of 2026, you must provide written notice to adjoining landowners before replacing a fence on a shared property line. This 'Good Neighbor Law' is strictly enforced in Maui County and is a prerequisite for any permit application in the Paia Town Historic District.

How do I ensure my fence posts are stable in Paia?

Frost depth is 0 inches in Hawaii, so frost heave is not a structural concern. The primary engineering challenge is the 115 MPH V-ult wind speed. For stability, posts must resist overturning and uplift forces defined by ASCE 7-22 standards. In the Paia Town Center, we design concrete footings with specific embedment depth and diameter to counter these wind loads, preventing failure during peak storm season.

What is the best fence material for Paia's environment?

Material selection is critical due to very heavy termite risk and high soil corrosivity. Pressure-treated wood must use borate preservatives. Metal components, including fasteners and brackets, must be 316-grade stainless steel or hot-dip galvanized to prevent rapid corrosion and unsightly rust streaks. Incompatible materials will fail prematurely in this coastal climate.

How is my fence designed for high winds?

The 115 MPH V-ult wind speed rating dictates the structural design. This engineering standard determines post spacing, concrete footing mass, and the required strength of all connections and brackets. A fence in Paia Town Center must be engineered to survive the sustained gusts and pressure differentials of a tropical storm, not just typical trade winds.



Scroll to Top
CALL US NOW