Top Fencing Companies in Dike, IA, 50624 | Compare & Call

There are 105 fencing companies server in Dike IA

Midwest Fence & Construction Services

Midwest Fence & Construction Services

★★★☆☆ 3.0 / 5 (2)
155 NW Maple, Elkhart IA 50073
Fences & Gates, General Contractors

Midwest Fence & Construction Services is a trusted general contractor and fence specialist serving Elkhart, IA, and the surrounding areas. Located just minutes from Elkhart’s historic downtown square ...

JLP Elite Construction

JLP Elite Construction

355 88th St, West Des Moines IA 50266
Decks & Railing, Fences & Gates

JLP Elite Construction, based in West Des Moines, IA, specializes in custom decks, railings, fences, and gates. A common local fencing issue is damage from harsh Iowa winters—heavy snow and freeze-tha...

Crusade Construction

Crusade Construction

★★★☆☆ 3.0 / 5 (2)
303 NW 1st, Melcher-Dallas IA 50163
Roofing, Decks & Railing, Fences & Gates

Crusade Construction has been serving Melcher-Dallas, IA, with expert roofing, deck, and fence services. Local homeowners often face fencing issues like rot from humidity or damage from storms, especi...

General Contractor Services

General Contractor Services

Des Moines IA 50310
General Contractors, Landscaping, Fences & Gates

Based in Des Moines, IA, we provide a full range of general contractor services, from kitchen, bathroom, and bedroom remodeling to new structure construction and building additions. Located near the E...

Anytime Welding

Anytime Welding

Ankeny IA 50023
Metal Fabricators, Fences & Gates, Decks & Railing

Anytime Welding, based in Ankeny, IA, is a trusted local metal fabricator specializing in deck construction, repair, replacement, and custom metalwork. Many Ankeny homeowners face fencing problems lik...

76 Fence

76 Fence

Ames IA 50014
Fences & Gates

76 Fence, based in Ames, IA, was founded in 2020 by digital marketing executive Patrick Brouillette after a frustrating search for a quality fence installer. Determined to set a higher standard, he la...

Friend Portable Welding

Friend Portable Welding

Iowa Falls IA 50126
Metal Fabricators, Farm Equipment Repair, Fences & Gates

Friend Portable Welding LLC, based in Iowa Falls, IA, provides expert on-site welding, repairs, and custom metal fabrication for commercial, residential, and industrial clients. Founded in late 2023 a...

Home Hero Handyman Donald Downey

Home Hero Handyman Donald Downey

425 SW Franklin Dr, Ankeny IA 50023
Fences & Gates, Handyman, General Contractors

Home Hero Handyman Donald Downey has been serving Des Moines and Ankeny, IA for over 35 years. As a locally owned general contractor and handyman, we specialize in interior and exterior home repairs, ...

Huber Fencing

Huber Fencing

★★★★★ 5.0 / 5 (1)
5070 18th Ave SW Ste 2, Cedar Rapids IA 52404
Fences & Gates

Huber Fencing is a locally owned and operated fencing contractor in Cedar Rapids, IA, established in 2006. Co-owned by Jerry and Colleen Huber, the company brings over 50 years of combined industry ex...

D&N Fence

D&N Fence

★★★☆☆ 3.2 / 5 (24)
4000 Blairs Ferry Rd NE, Cedar Rapids IA 52411
Fences & Gates

D & N Fence Co., Inc. has been serving Cedar Rapids and the surrounding Midwest region with reliable fencing solutions. As an authorized dealer for Merchants Metal and Buff Tech, the company offers a ...



Estimated Fencing Costs in Dike, IA

Emergency Fence/Gate RepairStorm / Security Response
$334 - $449
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,194 - $1,599

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Dike. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

What are the safety requirements for a fence around a pool in Iowa?

The IBC/IRC pool safety code mandates a barrier of at least 48 inches in height with self-closing, self-latching gates. While smart-gate IoT integration is a low trend in Dike, any electronic latch system must meet these fail-safe mechanical standards to limit homeowner liability. The latch must be out of a child's reach.

Why do fence post footings in Dike need to be deeper than 3 feet?

The local frost line depth is 42 inches. Posts set above this depth are subject to frost heave, which lifts the footing during freeze-thaw cycles and destabilizes the entire fence. Following IRC standards, all structural posts in the Dike Residential Core must be set a minimum of 42 inches deep in concrete to prevent failure.

How does Dike's wind rating affect my fence design?

Dike's design wind speed is 115 MPH V-ult. This engineering standard dictates post spacing, concrete footing size, and bracket strength. A fence built to ASCE 7-22 standards for this load will use closer post spacing and reinforced corners to survive peak storm season gusts, especially in open areas near Dike City Park.

Am I legally required to notify my neighbor before building a fence in Dike?

Yes. Iowa Code Section 359A.1, the Partition Fence law, creates a legal obligation for adjoining landowners. In Dike, you must provide written notice to any neighbor sharing a property line before constructing or replacing a boundary fence. Failure to do so can result in cost-sharing disputes and legal action.

What steps are required before digging fence post holes?

You must contact Iowa One Call (811) at least 48 hours before digging. Hitting a buried utility line in the Dike Residential Core is a major liability for repair costs and service disruption. After the locate is complete, you must secure a permit from the Dike permit office; we manage this paperwork to ensure code compliance.

How soon can a consultation be scheduled in Dike?

We typically schedule consultations within 2-3 business days. Our route from Dike City Park via IA-57 provides a 15-20 minute response time to most addresses in the core residential area. We will confirm the site visit 24 hours in advance and arrive with the necessary zoning maps and site assessment tools.

What are the fence height and placement rules for my Dike property?

Dike zoning enforces a 4-foot height limit in front yards and a 6-foot limit in rear yards. The setback regulation is 0 feet, allowing fences directly on the property line. For corner lots, especially those near IA-57, you must maintain a clear 'sight triangle' at intersections; no fence or planting can obstruct driver visibility within that zone.

What fencing material is best for Dike's soil and pest conditions?

Dike has moderate soil corrosivity and a moderate termite risk level. Galvanized steel posts and hardware are recommended to resist rust. For wood fences, use pressure-treated lumber rated for ground contact and stainless steel fasteners to prevent rust streaks. Avoid materials like untreated pine that attract pests.



Scroll to Top
CALL US NOW